calabrse052

Can someone tell me how to get my shocks right on my NQ please? I fill the resivour up with thirty weight, but no change....Obviously air is my problem, but how to you beed with no valave?
Does anyone know the process? I need them stiffer...I notice that even with resivour filled you can still push piston to the top but if you keep doing it, it sprays im i on the right track? Help if you can, had my truck a month and havent played yet...t

WSW-WYATT-EARP

only fill the shock about 3/4 full ... use heavier weight oil to get a stiffer shock ... adjust the spring so there is more preload on them ... look into getting heavier springs ....

R/C Madman

My Feedback: (1)

The Duratrax shocks are a problem child! I went through 2 sets just running on the street. I don't know if it is a bad designe or just poor quality? I would get some better shocks! IMO Ofna makes some of the best shocks out there but, I am not sure if they have any of the same size although they should be close.

calabrse052

thanx the front shocks are fine...the back was just sagging....everybody keeps saying my truck is a piece of **** but it seems alright to me..the hobbyshop guy is a dick, he wont even help me if it aint a savage...someone told me about pouring in a little oil at a time, and moving the piston real slow...I was kinda doing this and it splattered everywhere....Is this the correct process? I could have been going to fast or done something wrong