motoxer52

i was drag racin a xxxnt drake edition an were goin and the truck just turn 45 degrees into this maill box and miss the front wheel and hit the back wheel and RIPPED the WHOLE A-ARM WHEEL ROD AND SHOCK.its all fine all have to but skrew and chassis[:@][:@][:@][:@]

this reLLY SUCK I HAVE TO SPEND LIKE 100 TO FIX IT

i cant take it back cause i got it for Xmas gift

dryvr

you ran your truck into a mailbox and your complaining?

motoxer52

no it the cheap desigean of the where the rea arm blots go


will a gs storm pro chassis work or juts a storm

motoxer52

will only just plain strom buggy chassis or could i use a pro one

scale only 4 me

My Feedback: (158)

motoxer52
It would be easier for everyone to assess your problem if you would write in complete sentences

Translation??
You ripped the rear bulkhead mounting hole out of the chassis

Yes a Stock or Storm Pro chassis will work. Fiorni will work for that matter too.

One word- eBay
Good luck

motoxer52

thanks

i8tweety

My Feedback: (11)

I don't know of a single stock truck that could withstand such an impact. If you were drag racing and "were goin", it's fairly safe to say you were running in excess of 40 MPH. The SUT uses 2 bolts to hold the aluminum arm carrier (one for each arm). I wouldn't call it a bad design. If they were part of the bulkheads (as many other trucks are), you would need to replace the bulk-heads as well. Either way, you'd end up needing parts.

motoxer52

true but i just got off the line and was probally only 15 mph max and it was 10ft from where we started

otterball21

My Feedback: (1)

Your just lucky that you didn't hit yourself with it!... the SUT comes in with a weight of like 10-12 pounds. It's a heavy truck. You get that sucker going. Don't want to hit yourself with it. Dangerous. It's built pretty solid.