55 SERIES RIM / Tire
#1
Senior Member
Thread Starter
Join Date: Apr 2003
Location: City of Industry,
CA
Posts: 1,516
Likes: 0
Received 0 Likes
on
0 Posts
55 SERIES RIM / Tire
Just a quick annoucement for everyone
NEW ASSAULT 55 SERIES RIM and SNIPER Racing Tire
GS214 Assault Rims (2)
GS215 Sniper racing tire (2)
CEN Racing release the 55 series Assault racing rim along with an all new “SNIPER” racing tire. The Assault rim and Sniper racing tire will fit ANY monster truck utilizing 23mm wheel hexes. The Assault monster truck rim and Sniper racing tire will be the largest racing rim and tire combo available in the industry.
Application- MGT, LST, Revo, Savage, TNX, Mammoth, Genesis, T-max,
NEW ASSAULT 55 SERIES RIM and SNIPER Racing Tire
GS214 Assault Rims (2)
GS215 Sniper racing tire (2)
CEN Racing release the 55 series Assault racing rim along with an all new “SNIPER” racing tire. The Assault rim and Sniper racing tire will fit ANY monster truck utilizing 23mm wheel hexes. The Assault monster truck rim and Sniper racing tire will be the largest racing rim and tire combo available in the industry.
Application- MGT, LST, Revo, Savage, TNX, Mammoth, Genesis, T-max,
#2
Senior Member
Join Date: Oct 2004
Location: San Antonio,
TX
Posts: 4,867
Likes: 0
Received 0 Likes
on
0 Posts
RE: 55 SERIES RIM / Tire
Here they are on my LST.
For anyone with XTM LS series tires like the Meats and BRT1's you now have a 23mm hex strong rim!!
Meats on CEN 55 Series
BRT1 on CEN 55 Series
[link=http://www.dennisnadams.com/tmaxx/LST/CEN_55_table_top.wmv]Video: Me testing them on my LST (short 7 seconds) [/link]
For anyone with XTM LS series tires like the Meats and BRT1's you now have a 23mm hex strong rim!!
Meats on CEN 55 Series
BRT1 on CEN 55 Series
[link=http://www.dennisnadams.com/tmaxx/LST/CEN_55_table_top.wmv]Video: Me testing them on my LST (short 7 seconds) [/link]
#6
Senior Member
Join Date: Oct 2004
Location: San Antonio,
TX
Posts: 4,867
Likes: 0
Received 0 Likes
on
0 Posts
RE: 55 SERIES RIM / Tire
Thx for comments!!
My racer body was done by rcbodz and it has a summer of racing, 16 races on it!! It still looks great everywhere except the rear body post area, you have to re-enforce back there.
I have only one set of the 55 series wheels, I just test fit all my LS tires before I glued up the Snipes (they got bite). I will get more when I get motivated and remove all my glued up XTM LS Meats and BRT1's.
My racer body was done by rcbodz and it has a summer of racing, 16 races on it!! It still looks great everywhere except the rear body post area, you have to re-enforce back there.
I have only one set of the 55 series wheels, I just test fit all my LS tires before I glued up the Snipes (they got bite). I will get more when I get motivated and remove all my glued up XTM LS Meats and BRT1's.
#7
Junior Member
Join Date: Dec 2005
Location: , IN
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
RE: 55 SERIES RIM / Tire
ORIGINAL: 2DMaxLST!!
Thx for comments!!
My racer body was done by rcbodz and it has a summer of racing, 16 races on it!! It still looks great everywhere except the rear body post area, you have to re-enforce back there.
I have only one set of the 55 series wheels, I just test fit all my LS tires before I glued up the Snipes (they got bite). I will get more when I get motivated and remove all my glued up XTM LS Meats and BRT1's.
Thx for comments!!
My racer body was done by rcbodz and it has a summer of racing, 16 races on it!! It still looks great everywhere except the rear body post area, you have to re-enforce back there.
I have only one set of the 55 series wheels, I just test fit all my LS tires before I glued up the Snipes (they got bite). I will get more when I get motivated and remove all my glued up XTM LS Meats and BRT1's.
2D help a fella out will ya? (yes thats right again ) Where can I score these BRT1's? I've searched high n low.
Thanks, Eric
#9
Senior Member
Join Date: Nov 2005
Location: new york,
NY
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
RE: 55 SERIES RIM / Tire
crap, why they r making only 23mm ??!!??!! i have 3 sets of 17mm wheels, now or im gonna waste time changing hexes, or sell ( loose) those get hexes and new sets, easier would be make 23 and 17mm make life easier for 17mm users [&:]
#10
Senior Member
Join Date: Oct 2004
Location: San Antonio,
TX
Posts: 4,867
Likes: 0
Received 0 Likes
on
0 Posts
RE: 55 SERIES RIM / Tire
Damn, I had forgotten about that picture with the yellow Crowdpleazer body, that's hot!!
I fear that they have quit making BRT1's, they are still my favorite all around LST tire. I wish I would have had a set to throw on my LST today with all the craters and stuff that were forming on the track. I have a set that I received 2 days before my first LST. I also have another set that I glued to the XTM dish style rims with 14mm hexes that lasted half a tank. When the proper 23mm hex solution arrives for these killer 8mm axles in the next few weeks I will post video of me racing both the Snipers and a set of BRT1's. I look forward to that, I bet my LST racer with a set of Snipers and the RE SF .32 will do 45 or 50 with stock gearing.
I fear that they have quit making BRT1's, they are still my favorite all around LST tire. I wish I would have had a set to throw on my LST today with all the craters and stuff that were forming on the track. I have a set that I received 2 days before my first LST. I also have another set that I glued to the XTM dish style rims with 14mm hexes that lasted half a tank. When the proper 23mm hex solution arrives for these killer 8mm axles in the next few weeks I will post video of me racing both the Snipers and a set of BRT1's. I look forward to that, I bet my LST racer with a set of Snipers and the RE SF .32 will do 45 or 50 with stock gearing.
#11
Junior Member
Join Date: Dec 2005
Location: , IN
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
RE: 55 SERIES RIM / Tire
2D do you think this is a proper 23mm hex solution?
[link=http://dadders.net/wheeladapters.htm]Wheel Adapters[/link]
As long they are Pro-Line 6034-00 and bored out right shouldn't they work okay?
I order a set... guess I'll find out
[link=http://dadders.net/wheeladapters.htm]Wheel Adapters[/link]
As long they are Pro-Line 6034-00 and bored out right shouldn't they work okay?
I order a set... guess I'll find out