robl110

I am already tired of the stock motor. Looking to get an aftermarket motor with pull start that will drop in. Would like around 3hp. Something that is easy tune would be nice. Looking to spend $250 or less. Please post suggestions.

Thanks,

Rob

nkbrisson

LRP.28 Spec3, has pull start, is a drop in, use the duratrax 3pin flywheel, and ofna clutch nut, no need to modify anything.

robl110

Thanks Nkbrisson, do you know of a good place to buy one?

Anybody else have any recomendations?

Would like somethings that will provide some good wheelie popping and bashing power.

n2

Axial .32 (5.3) this is in my warhead and it absolutely ROCKS

http://www.neweramodels.com/cgi-bin/...q&part_id=2958

nkbrisson

Horizon Hobby http://www.horizonhobby.com/Products...ID=ASCLRP32802 , Tower Hobbies (order pending) http://www2.towerhobbies.com/cgi-bin...&I=LXKYU8&P=ML , RC Planet http://www.rcplanet.com/scart/public....28+spec3+sale

These are just to name a few, but they are a popular engine and are starting to hard to get, alot of places are sold out because so many people like them, and they go like heck.

turtok187

hello
how about this one? Picco P3-28 .. pure power in the low and high rpm at the end! pullstart is bullsh.. but if you use a startbox! woohoo!
http://www.ofna.com/eng-picco-28.html
http://www2.towerhobbies.com/cgi-bin...&I=LXMCA4&P=ML

robl110

N2, did you have to do any modifications to install the Axial 32 in your Warhead?

THanks,

Rob