Savage Battery Pack
05-05-2003, 05:05 PM
#1
Senior Member
Thread Starter
Join Date: May 2003
Location: St. Charles, IL
Posts: 1,014
Likes: 0
Received 0 Likes
on
0 Posts
Savage Battery Pack
I just bought the battery pack for my savage from
www.badhorsie.com, This way i'm done with alkalines.
Does anyone have any mounting tips, I dont want to keep having to take the servo tray top off, its a real tight squueze on the savage. I was thinking about drilling holes in the cover and running the wires out the top or side. and then just cover the adapter plug with electrical tape during use.
Any suggestions would be appreciated.
www.badhorsie.com, This way i'm done with alkalines.
Does anyone have any mounting tips, I dont want to keep having to take the servo tray top off, its a real tight squueze on the savage. I was thinking about drilling holes in the cover and running the wires out the top or side. and then just cover the adapter plug with electrical tape during use.
Any suggestions would be appreciated.
05-05-2003, 05:19 PM
#2
Senior Member
Join Date: Apr 2003
Location: East Pittsburgh, PA,
Posts: 1,835
Likes: 0
Received 0 Likes
on
0 Posts
Savage Battery Pack
I drilled a small hole in the cover so I wouldn't have to take it off to charge it and it work s fine.I use a trinity hump style pack
05-05-2003, 05:24 PM
#3
Senior Member
Thread Starter
Join Date: May 2003
Location: St. Charles, IL
Posts: 1,014
Likes: 0
Received 0 Likes
on
0 Posts
Savage Battery Pack
Do you cover the charger adapter? or just leave it exposed.
Is your hole drilled for the wires only, or for the plug to fit thru.
I think i'm going to have to make the wires longer, i only have about 3-4" of wire, not much slack to play with
Is your hole drilled for the wires only, or for the plug to fit thru.
I think i'm going to have to make the wires longer, i only have about 3-4" of wire, not much slack to play with
05-05-2003, 05:43 PM
#4
Senior Member
Join Date: Apr 2003
Location: East Pittsburgh, PA,
Posts: 1,835
Likes: 0
Received 0 Likes
on
0 Posts
Savage Battery Pack
I bought a switch with and extra plug on it and just drilled a small so the extra one can stick out of the cover.I don't cover mine with anything but I don't do allot driving in realy muddy or dusty areas so if you do you should cover it with something maybe just some electrical tape or something.
