Dynamite/Losi Shocks
#1
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Moscow, ID,
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Dynamite/Losi Shocks
I am going to be getting a set of these soon, and had a question. What's going to be the best way to attach them to my shock towers and a-arms? I will be running the stock shock towers and I have RPM A-arms. Do I need to do anything special to make them work? I would like to get away from the philips head screw that are in the shock towers since they are stripping out like all the rest. I have replaced just about every other screw with a socked head or flat socket screw. Any suggestions would be helpful. Thanks in advance....
#2
Senior Member
Join Date: Apr 2003
Location: Homestead, FL,
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Dynamite/Losi Shocks
I had the same problem with the super soft stock screws. I purchased a Full Force screw set and no more stripped screws. I also placed washers and locknuts on the bottom of the shocks where they attach to the lower control arm. I kept stripping the hole in the RPM arms. You will love the shocks. I do.