Can a 2.5 trx engine,Block be Taped.
#1
Junior Member
Thread Starter
Join Date: Jun 2003
Location: VA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Can a 2.5 trx engine,Block be Taped.
Will this work a this engine? and would it give better peformance,and power..........P.S any tips on getting more power.thanks
#2
Banned
My Feedback: (1)
Join Date: Jun 2003
Location: Orlando, FL
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
Re: Can a 2.5 trx engine,Block be Taped.
Originally posted by maxxpower2
Will this work a this engine? and would it give better peformance,and power..........P.S any tips on getting more power.thanks
Will this work a this engine? and would it give better peformance,and power..........P.S any tips on getting more power.thanks
#3
Senior Member
My Feedback: (4)
Join Date: Apr 2003
Location: Douglas,
WY
Posts: 842
Likes: 0
Received 0 Likes
on
0 Posts
Can a 2.5 trx engine,Block be Taped.
Me as well But for more performance it can be ported and polished, however, unless you have a good idea on how a 2 stroke works I would not sugjest porting it your self, but you can polish the crank on it. I just ported and polish my xtm 247 seemed to increase the torque and added quite a bit of top end, I just polished the crank, inlarged the 3 turbos in the crank, knife edged the rod, extended the intake ports on the sleeve and matched the exhuast port to the case.