Fire hammer
 

Is there any place that still has good selection of fire hammer parts?

RE: Fire hammer
 

The old duratrax gasser?

RE: Fire hammer
 

thats the one. duratrax fire hammer or the xtm grizzly

RE: Fire hammer
 

If I remember correctly it was a clone of the Smartech car which was a clone of the FG. A lot of FG marder or MT parts will fit. What exactly do you need?

RE: Fire hammer
 

right now the part i can not find is the spur gear. I have seen posts from a few years ago of folks that had upgraded to metal parts but right now I can hardly find any parts for it.

RE: Fire hammer
 

There's a member here called hndaman1, you should pm him, he'll be able to help you out with what's compatible and what's not and probably knows somewhere to get original parts. I don't mind if you say I suggested you PM him.

RE: Fire hammer
 

I do know that the fg gears are not the right tooth count to use with the Firehammer, unless you also go with the FG gear carrier. The stock firehammer gear carrier does not have the correct spacing to use the FG gears.

http://www.ebay.com/itm/FG-Marder-Be...item4ab55696d6

http://www.ebay.com/itm/ALLOY-GEAR-P...item2a1b0112d9

http://www.ebay.com/itm/FG-Marder-Be...item4ab5562b7f

http://www.ebay.com/itm/FG-Marder-Be...item4ab557188f

RE: Fire hammer
 

I found these on ebay. This will solve your issue and you will never need to buy another gear!
http://www.ebay.com/itm/BLACKBONE-ST...item256e31d8da