Steering upgrade from Hitec HS-645MG
I have a 645MG on my T-quake, and I'm still not happy with the performance. I want to upgrade, and keep it under $50.
The stock Mammoth servo looks like it would be an upgrade, but I haven't seen anyone run one for some reason. I was also thinking about going with a 1/4 scale servo. |
RE: Steering upgrade from Hitec HS-645MG
Well, you can always go with the Hobbico servoes! They have a standard size servo that can pull 200 oz at .19 sec. However, Hobbico servoes are bare-crap quality. Even Hobbico knows this because on their trainer plane, the Nextsar, they use FUTABA servoes! Go figure. :)
I am shocked that the Hitec 645MG is not enough. |
RE: Steering upgrade from Hitec HS-645MG
I have large offset tires MT3 and run a kimrough servo saver.
Should I cut out the servo saver and just buy extra servo gears? |
RE: Steering upgrade from Hitec HS-645MG
No. you should do the MP Servo Saver upgrade.
|
RE: Steering upgrade from Hitec HS-645MG
I second Slago's suggestion.
|
RE: Steering upgrade from Hitec HS-645MG
you'll have to pony up $80-$100 for a really Good servo that both has speed and torque
|
RE: Steering upgrade from Hitec HS-645MG
I am very surpriesed on how that servo can't help you more. Do not buy the Mammoth servo it is junk. Even though it is rated at 177 it does not worth a crap. Hobbico same thing. I run the 645MG on my Mammoth and Have no problems, plenty of speed somethings too much so I slow it down. And the Mammoth huge. But if still want more, stick with Hitec or JR servos.
|
RE: Steering upgrade from Hitec HS-645MG
I will try the mp servo saver first. I guess this it the part you guys are talking about
http://www2.towerhobbies.com/cgi-bin...&I=LXABH5&P=ML |
RE: Steering upgrade from Hitec HS-645MG
MP Saver, HS5945MG Hitech digital servo...
Wonderful from what I can see so far. Tweedy Bird |
RE: Steering upgrade from Hitec HS-645MG
I have a 5645 servo in my savage.Its a monster at 168 inoz of torque.It also has a metel gear train, is digital,and waterproof.It retails for 60 bucks.Im still waiting to do the mp upgrade although it looks easy enough.I put a large(very large) kimbrough saver on and its good enough for now.It will turn the wheels all the way when still on the ground.
|
RE: Steering upgrade from Hitec HS-645MG
yeah I had the truck in the house on a thick rug, and it was whipping the wheels around like they were just dipped in melted butter ;)
very pleased with them so far. Tweedy |
All times are GMT -8. The time now is 11:25 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.