almaidah

ok i was just trying to see if anyone has used this engine HPI Nitro Star T-15 on their bike? and if so what do i need to look out for or should it be pretty simple to setup.. thanks

jb.

Click here for the link to the engine referred to in previous post.

WOH

Any answer on this? I am looking at the Nitrostar G3.0.

almaidah

well if you go with that engine let me know how it works i will have to go with that also.. im running the traxxas 15 right now and i think i get around 45-50 top but i want a quicker take off and faster top speed..

WOH

Please tell me how you installed the clutch. I have an OS15, but it has a shaft for an airplane with a nut and not a screw.

almaidah

you would use the parts off ur tt engine and i use the oneway bearing to start it. i hope that answered ur Q

WOH

Do you mean I need to use the shaft from the engine too? I cannot install the clutch on my engine. My shaft looks like the 2.5 but it has threads on the very end. It has the airplane shaft.
http://www3.towerhobbies.com/cgi-bin...?&I=LXBZ30&P=0

almaidah

yes i would use the shaft from the tt and all the outter parts thats on the shaft

almaidah

i tried it on a os myself and i belive that tt shaft will fight just right i dont know what my os was i think it was a 12 but they should be about the same or you could by a shaft extension if that dont work and you would have to take off the round part on the os shaft so you can get longer reach