93.1 mph jato part 2
03-06-2013, 07:36 AM
#27
RE: 93.1 mph jato part 2
[quote]ORIGINAL: nastyboys727
kool beanz cant wait it seems nitro dies out in the winter but not here in florida
[/quote
I still run mine any day I can get over 40 degrees F. Just ran yesterday 48F ran the hyper 7 and one of the Jatos. Performed in stellar fashion. Just two tanks through both as I was getting cold and needed to get Kerosene in anticipation of the Impending snow.
03-31-2013, 03:38 PM
#33
RE: 93.1 mph jato part 2
Are you one of the guys coming out to 79th street on Sunday nights??? I've seen a few fast jatos out there. I'll be there tonight around 10PM.
If you haven't gone out we hang out in the shopping plaza on the corner of NW 79th street and US1.
If you haven't gone out we hang out in the shopping plaza on the corner of NW 79th street and US1.
04-06-2013, 08:38 AM
#34
Senior Member
Thread Starter
Join Date: Jan 2011
Location: Maimi, FL
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
RE: 93.1 mph jato part 2
yea i be coming out there on sundays i was out there last sunday but i did not stay that long me and u
meet before at ct hobby store before
meet before at ct hobby store before
04-06-2013, 09:14 AM
#35
Junior Member
Join Date: Aug 2012
Location: bayville,
NJ
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RE: 93.1 mph jato part 2
I have a .21 jato with a OPSradical 621 in it and im trying for top speeds also. I had all the exstened chassi they make and imhaveing allthe usal problems and I couldnt get it to go over 78 mph no matter what I tried.A buddy of mind told me about rlc hobbies and they have this new chassi and when he bought it and tried it all his problems wentaway. I was skeptical because I tried all theothers. He was on me somuch to try it or buy one that hetook his all apart and let me try it. All I can sayis WOW no changes just the chassiand im now running 87 mph and it goes straight. Before it was every wich way but looseWhat adifference. I bolted my new era chassi back up and 78 mph. Needless to say I have one now it just showed up. Its total different then the other chassis it has a once peicefront bumper thats atached to the chassiand hasthis crumple zone thingwere its not suposed to break the top plate any more. I dont knowanything about that yet untilit get tested into some curbs but that chassi platerealy works. I can make pass after pass after pass as before make one or2 then into a curb and crash it because it was out of control. Its rlchobbies.com under the jato parts section
04-07-2013, 06:18 AM
#36
Senior Member
Thread Starter
Join Date: Jan 2011
Location: Maimi, FL
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
RE: 93.1 mph jato part 2
yea i be coming out there on sundays i was out there last sunday but i did not stay that long me and u
meet before at ct hobby store before
meet before at ct hobby store before
04-08-2013, 04:40 PM
#37
Senior Member
Join Date: Feb 2010
Location: st pete,
FL
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
RE: 93.1 mph jato part 2
ORIGINAL: Buttonmanb
I have a .21 jato with a OPSradical 621 in it and im trying for top speeds also. I had all the exstened chassi they make and imhaveing allthe usal problems and I couldnt get it to go over 78 mph no matter what I tried.A buddy of mind told me about rlc hobbies and they have this new chassi and when he bought it and tried it all his problems wentaway. I was skeptical because I tried all theothers. He was on me somuch to try it or buy one that hetook his all apart and let me try it. All I can sayis WOW no changes just the chassiand im now running 87 mph and it goes straight. Before it was every wich way but looseWhat adifference. I bolted my new era chassi back up and 78 mph. Needless to say I have one now it just showed up. Its total different then the other chassis it has a once peicefront bumper thats atached to the chassiand hasthis crumple zone thingwere its not suposed to break the top plate any more. I dont knowanything about that yet untilit get tested into some curbs but that chassi platerealy works. I can make pass after pass after pass as before make one or2 then into a curb and crash it because it was out of control. Its rlchobbies.com under the jato parts section
I have a .21 jato with a OPSradical 621 in it and im trying for top speeds also. I had all the exstened chassi they make and imhaveing allthe usal problems and I couldnt get it to go over 78 mph no matter what I tried.A buddy of mind told me about rlc hobbies and they have this new chassi and when he bought it and tried it all his problems wentaway. I was skeptical because I tried all theothers. He was on me somuch to try it or buy one that hetook his all apart and let me try it. All I can sayis WOW no changes just the chassiand im now running 87 mph and it goes straight. Before it was every wich way but looseWhat adifference. I bolted my new era chassi back up and 78 mph. Needless to say I have one now it just showed up. Its total different then the other chassis it has a once peicefront bumper thats atached to the chassiand hasthis crumple zone thingwere its not suposed to break the top plate any more. I dont knowanything about that yet untilit get tested into some curbs but that chassi platerealy works. I can make pass after pass after pass as before make one or2 then into a curb and crash it because it was out of control. Its rlchobbies.com under the jato parts section
i was lookin at this one
http://rlchobbies.com/part427.html
04-08-2013, 04:48 PM
#38
Junior Member
Join Date: Aug 2012
Location: bayville,
NJ
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RE: 93.1 mph jato part 2
No its this one http://rlchobbies.com/part405.html I bolted mine all up over the weekend and the best I hit was 89 mph
ORIGINAL: nastyboys727
i went to the sit thay have 4 chassies what one are you talkin i got the ot body chassie and it's trash
i was lookin at this one
http://rlchobbies.com/part427.html
ORIGINAL: Buttonmanb
I have a .21 jato with a OPSradical 621 in it and im trying for top speeds also. I had all the exstened chassi they make and imhaveing allthe usal problems and I couldnt get it to go over 78 mph no matter what I tried.A buddy of mind told me about rlc hobbies and they have this new chassi and when he bought it and tried it all his problems wentaway. I was skeptical because I tried all theothers. He was on me somuch to try it or buy one that hetook his all apart and let me try it. All I can sayis WOW no changes just the chassiand im now running 87 mph and it goes straight. Before it was every wich way but looseWhat adifference. I bolted my new era chassi back up and 78 mph. Needless to say I have one now it just showed up. Its total different then the other chassis it has a once peicefront bumper thats atached to the chassiand hasthis crumple zone thingwere its not suposed to break the top plate any more. I dont knowanything about that yet untilit get tested into some curbs but that chassi platerealy works. I can make pass after pass after pass as before make one or2 then into a curb and crash it because it was out of control. Its rlchobbies.com under the jato parts section
I have a .21 jato with a OPSradical 621 in it and im trying for top speeds also. I had all the exstened chassi they make and imhaveing allthe usal problems and I couldnt get it to go over 78 mph no matter what I tried.A buddy of mind told me about rlc hobbies and they have this new chassi and when he bought it and tried it all his problems wentaway. I was skeptical because I tried all theothers. He was on me somuch to try it or buy one that hetook his all apart and let me try it. All I can sayis WOW no changes just the chassiand im now running 87 mph and it goes straight. Before it was every wich way but looseWhat adifference. I bolted my new era chassi back up and 78 mph. Needless to say I have one now it just showed up. Its total different then the other chassis it has a once peicefront bumper thats atached to the chassiand hasthis crumple zone thingwere its not suposed to break the top plate any more. I dont knowanything about that yet untilit get tested into some curbs but that chassi platerealy works. I can make pass after pass after pass as before make one or2 then into a curb and crash it because it was out of control. Its rlchobbies.com under the jato parts section
i was lookin at this one
http://rlchobbies.com/part427.html
04-10-2013, 01:18 PM
#41
Junior Member
Join Date: Aug 2012
Location: bayville,
NJ
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RE: 93.1 mph jato part 2
Thats a good question. If it is longer it's not much.But boy does it work, nite and day from from the others and today gotto test there crumple zone deal. I hit a curb today around 75 mphand it did not break the top plate I could not belive it. That hitwould have bent the stockchassi and broke the top plate. ManI thought for sureafter a hard hit like that it was done. Nope top plate not broke and chassi is straight. Im no engineer but what ever they have going on it flat out works. I have had a jato for 5 years and spent a tonof money on everything they made for them so far for them and this rlchobbies is a home run. Your notwinning if your racing, parken lot bashing or high speed with out one of these chassi.
ORIGINAL: nastyboys727
is it longer then stock
is it longer then stock
04-11-2013, 10:30 AM
#42
Senior Member
Thread Starter
Join Date: Jan 2011
Location: Maimi, FL
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
RE: 93.1 mph jato part 2
i.have the picco 28 tft engine on my jato with the setup is 30/36 im going to try to put some.pictures up real soon its like 75% done bluiding
04-11-2013, 12:24 PM
#43
Junior Member
Join Date: Aug 2012
Location: bayville,
NJ
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RE: 93.1 mph jato part 2
Im running 27/34
ORIGINAL: roadrunner ss
i.have the picco 28 tft engine on my jato with the setup is 30/36 im going to try to put some.pictures up real soon its like 75% done bluiding
i.have the picco 28 tft engine on my jato with the setup is 30/36 im going to try to put some.pictures up real soon its like 75% done bluiding
04-11-2013, 02:10 PM
#45
Senior Member
Join Date: Feb 2010
Location: st pete,
FL
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
RE: 93.1 mph jato part 2
i called rlc the one i picked is the one i want he sed thay all help keep it stiffer and the one you picked is a lil longer i forgot the numbers but the one i want is the longest and and light too i told him im not thankin about the whole crush zone thingy top deck only ten bucks any ways
04-11-2013, 04:01 PM
#46
Junior Member
Join Date: Aug 2012
Location: bayville,
NJ
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RE: 93.1 mph jato part 2
The guys name is Rich and he can make you any length chassi you want. My friend had one of those chassi and had him make it1 inch longer and 4.9 mm thick, that chassi is sick. My other buddy he had him make him aset of sick wheelie bars. That place is a machine shop they can make you anything custom and there not that exspensive.I just gave them a deposit to make me a custom motor mount for the pico .28 so its a true bolt in.
ORIGINAL: nastyboys727
i called rlc the one i picked is the one i want he sed thay all help keep it stiffer and the one you picked is a lil longer i forgot the numbers but the one i want is the longest and and light too i told him im not thankin about the whole crush zone thingy top deck only ten bucks any ways
i called rlc the one i picked is the one i want he sed thay all help keep it stiffer and the one you picked is a lil longer i forgot the numbers but the one i want is the longest and and light too i told him im not thankin about the whole crush zone thingy top deck only ten bucks any ways