Official HPI MT2 Thread
Senior Member
Join Date: Sep 2006
Location: saint paul,
MN
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official HPI MT2 Thread
for anyone looking to buy a firestorm check this out....http://www.hobbypeople.net/gallery/261445.asp
Senior Member
Join Date: May 2006
Location: London, UNITED KINGDOM
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official HPI MT2 Thread
ORIGINAL: arapoda
So will the current arm I have coming off the servo link straight up to the LRP? My only concern is how well the engine will work with the other elements of the MT2, but I am now seriously considering buying this engine. Thanks again.
(Will the HPI washers that I have fit this engine too? There are little screws, bearings and stuff that go on the engine shaft, just wondering whether all these will fit, or if they need to be bought from this company?)
ORIGINAL: djheptic
the LRP z18s Pro is a great engine it is fast, easy to tune, holds a tune great, starts great and to top it off its cheap!. any clutch bell will fit & the same with the fly wheel off the t-15. i bought a new flywheel (not sure what make it is but it was recomended by the hobby store) i have a HD 13T k.factory clutch bell and hpi racing clutch shoes. do get the engine you will not be disappointed. i know im not
here is a link to the company LRP. [link]http://www.lrp-electronic.de/e/lis/[/link] it has technical data ect about the engine
ORIGINAL: arapoda
Can you tell me a bit more about the LRP z18s pro? In terms of clutch bells, etc. Does it take the HPI clutch bells and fly wheel? (Also, does it take the HPI engine mount? Thanks in advance.
ORIGINAL: djheptic
Do not get the hpi nitro star 18ss!! just a word of warning. its just as bad as the t-15 to tune, randomly stalls and runs hotter than other engines. many people on here will say to get the os .18cvrx but i have searched high and low in the uk for a os .18cvrx and failed to fine one. although i did find one but it was a short shaft. if you want a good, fast & reliable engine get the LRP z18s pro, no question about it. its a brilliant engine. its around £90-£110.
Do not get the hpi nitro star 18ss!! just a word of warning. its just as bad as the t-15 to tune, randomly stalls and runs hotter than other engines. many people on here will say to get the os .18cvrx but i have searched high and low in the uk for a os .18cvrx and failed to fine one. although i did find one but it was a short shaft. if you want a good, fast & reliable engine get the LRP z18s pro, no question about it. its a brilliant engine. its around £90-£110.
here is a link to the company LRP. [link]http://www.lrp-electronic.de/e/lis/[/link] it has technical data ect about the engine
(Will the HPI washers that I have fit this engine too? There are little screws, bearings and stuff that go on the engine shaft, just wondering whether all these will fit, or if they need to be bought from this company?)
engine as it is a standard shaft engine just like the t-15. honestly do buy the engine. it is one sweet engine.
my setup is... flywheel (not sure of the make i will find out), HD K-Factory Clutch bell, HPI racing clutch shoes, bearings, cone washer ect.
Senior Member
Join Date: May 2006
Location: London, UNITED KINGDOM
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official HPI MT2 Thread
NICKRUMMY - i sent you a personal message about my diff problem. was just wondering if you recieved it because my internet explorer messed up.
ive just got a email from a admin tellin me to remove my avator
ive just got a email from a admin tellin me to remove my avator
RE: Official HPI MT2 Thread
Got it and I replied.
46u was mentioning about how they sent him a message about his avatar also. Sounds like they are cracking down on brand advertisement.
46u was mentioning about how they sent him a message about his avatar also. Sounds like they are cracking down on brand advertisement.
ORIGINAL: djheptic
NICKRUMMY - i sent you a personal message about my diff problem. was just wondering if you recieved it because my internet explorer messed up.
ive just got a email from a admin tellin me to remove my avator
NICKRUMMY - i sent you a personal message about my diff problem. was just wondering if you recieved it because my internet explorer messed up.
ive just got a email from a admin tellin me to remove my avator
Senior Member
Join Date: May 2006
Location: London, UNITED KINGDOM
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official HPI MT2 Thread
yeah ive just changed mine. and you cannot put HPI MT2 in your sig for eg. same with the names like "hpi_racer". silly really. oh well.
RE: Official HPI MT2 Thread
this is what you'll get for $20. Better than stock but you can get a lot better for more $$$. you'll have to make up your own bracket for it.
http://www2.towerhobbies.com/cgi-bin...?&I=LX3419&P=7
http://www2.towerhobbies.com/cgi-bin...?&I=LX3419&P=7
ORIGINAL: tamagooch
hi guys i need help choosing a tuned pipe for the os 18 cv-rx and i only want to spend $20 thanks
ps urgent
hi guys i need help choosing a tuned pipe for the os 18 cv-rx and i only want to spend $20 thanks
ps urgent
Senior Member
Join Date: May 2006
Location: London, UNITED KINGDOM
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official HPI MT2 Thread
ORIGINAL: adz06
just got warning about avator thing made me take it of lol like wat up wit that?
just got warning about avator thing made me take it of lol like wat up wit that?
they are also cracking down on names like "hpi_racer" or "hpimt2_man" sorry these are just my poor examples lol.
RE: Official HPI MT2 Thread
I ran this pipe and liked it
http://www2.towerhobbies.com/cgi-bin...&I=LXCPX4&P=ML
There is a new one out by HPI that looks nice but I don't have the link.
I'm running this and love it.
http://tsais.com/products/exhaust/tu.../10/E1019.html
http://www2.towerhobbies.com/cgi-bin...&I=LXCPX4&P=ML
There is a new one out by HPI that looks nice but I don't have the link.
I'm running this and love it.
http://tsais.com/products/exhaust/tu.../10/E1019.html
RE: Official HPI MT2 Thread
Yes the THS racing pipe from towers will work on the CV-RX. I had it on my truck for a little while before getting my Tsais pipe.
and yes the stock HPI pipe will work on the CV-RX also.
and yes the stock HPI pipe will work on the CV-RX also.
Senior Member
Join Date: Dec 2005
Location: dungannonnorthern ireland, UNITED KINGDOM
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official HPI MT2 Thread
r u serious so i ct have my cars listed down below what harms it doing i c u still have urs listed. lol
ORIGINAL: djheptic
its their new policy lol! if the company is not advertisen RCU we are not allowed to put up a brands logo in our avator. same with signatures. your not allowed to have like "hpi mt2"
they are also cracking down on names like "hpi_racer" or "hpimt2_man" sorry these are just my poor examples lol.
ORIGINAL: adz06
just got warning about avator thing made me take it of lol like wat up wit that?
just got warning about avator thing made me take it of lol like wat up wit that?
they are also cracking down on names like "hpi_racer" or "hpimt2_man" sorry these are just my poor examples lol.
Senior Member
My Feedback: (1)
Join Date: Sep 2005
Location: Moorpark,
CA
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official HPI MT2 Thread
jeez, it seems like rcu is getting more and more hostile as they get bigger and bigger. us members are just disposable now i guess.
Senior Member
Join Date: May 2006
Location: London, UNITED KINGDOM
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official HPI MT2 Thread
ORIGINAL: adz06
r u serious so i ct have my cars listed down below what harms it doing i c u still have urs listed. lol
r u serious so i ct have my cars listed down below what harms it doing i c u still have urs listed. lol
ORIGINAL: djheptic
its their new policy lol! if the company is not advertisen RCU we are not allowed to put up a brands logo in our avator. same with signatures. your not allowed to have like "hpi mt2"
they are also cracking down on names like "hpi_racer" or "hpimt2_man" sorry these are just my poor examples lol.
ORIGINAL: adz06
just got warning about avator thing made me take it of lol like wat up wit that?
just got warning about avator thing made me take it of lol like wat up wit that?
they are also cracking down on names like "hpi_racer" or "hpimt2_man" sorry these are just my poor examples lol.
but in their policy it states you cannot advertise brands that do not advertise RCU in your Avator, sig & now your member name lol!
Senior Member
Join Date: May 2006
Location: London, UNITED KINGDOM
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official HPI MT2 Thread
RCU's word of mouth...
SIGNATURES :: AVATARS :: USER TITLES
Avatars, signatures and user titles are available to present your favorite r/c item or saying to the public in every post you make. No political, social, religious, or other similar off topic will be allowed. You may not provide any information that links to a commercial website unless you are an RCU Banner Advertiser. As an RCU advertiser the information allowed is limited to company name, logo, insignia or website URL. No other promotional or advertising material is allowed except the information that is required by the disclosure statement.
Personal and r/c club links in the signature are acceptable as long as the website is not commercial or in any form of competition with RCU.
Any signature or avatar offensive or pornographic in materials will be removed immediately at management's discretion.
You may alter your User Title after 10 days and 10 posts. Under no circumstances may you impersonate a moderator or senior staff of RCU. These titles are earned and appointed only by RCU Administrator's.
"It has recently come to my attention that your avatar is promoting HPI Racing. It is against the RCU Community Rules to have an avatar promoting a commercial entity unless that entity is an RCU advertiser."
SIGNATURES :: AVATARS :: USER TITLES
Avatars, signatures and user titles are available to present your favorite r/c item or saying to the public in every post you make. No political, social, religious, or other similar off topic will be allowed. You may not provide any information that links to a commercial website unless you are an RCU Banner Advertiser. As an RCU advertiser the information allowed is limited to company name, logo, insignia or website URL. No other promotional or advertising material is allowed except the information that is required by the disclosure statement.
Personal and r/c club links in the signature are acceptable as long as the website is not commercial or in any form of competition with RCU.
Any signature or avatar offensive or pornographic in materials will be removed immediately at management's discretion.
You may alter your User Title after 10 days and 10 posts. Under no circumstances may you impersonate a moderator or senior staff of RCU. These titles are earned and appointed only by RCU Administrator's.
"It has recently come to my attention that your avatar is promoting HPI Racing. It is against the RCU Community Rules to have an avatar promoting a commercial entity unless that entity is an RCU advertiser."
Senior Member
Join Date: Nov 2006
Location: N/A, UNITED KINGDOM
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official HPI MT2 Thread
Please, nobody else get banned! You're all too helpful!
Got a question: When people describe 'sealing' an engine, incase of air leaks, etc. How exactly do you go about sealing an engine and what do you use?
Got a question: When people describe 'sealing' an engine, incase of air leaks, etc. How exactly do you go about sealing an engine and what do you use?
Senior Member
Join Date: Jun 2005
Location: Auckland, NEW ZEALAND
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official HPI MT2 Thread
ORIGINAL: nickrummy
this is what you'll get for $20. Better than stock but you can get a lot better for more $$$. you'll have to make up your own bracket for it.
http://www2.towerhobbies.com/cgi-bin...?&I=LX3419&P=7
this is what you'll get for $20. Better than stock but you can get a lot better for more $$$. you'll have to make up your own bracket for it.
http://www2.towerhobbies.com/cgi-bin...?&I=LX3419&P=7
http://www2.towerhobbies.com/cgi-bin...?&I=LXTT82&P=7
Senior Member
Join Date: Oct 2006
Location: houston,
TX
Posts: 951
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official HPI MT2 Thread
yeah i used to have a osmax engines avatar and i just recieved a message to remove it, kinda stupid if you ask me we all talk about those advertisers anyways i dont think it makes a difference