Please help!! I need info!
#1
Junior Member
Thread Starter
Join Date: Feb 2005
Location: , AR
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Please help!! I need info!
I have a Omega Pico .12 in a Traxxas Rustler .15 and I can't find the settings to break in the engine and after what the settings should be. A website or someone with experience with this engine would be a great help.
#2
Senior Member
Join Date: Dec 2004
Location: whitehall,
WI
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
RE: Please help!! I need info!
did u get a manual with ur engine??
and i have no experience with Picco engines
sry, but read ur manual from front to back
-Ryan
and i have no experience with Picco engines
sry, but read ur manual from front to back
-Ryan
#3
Senior Member
My Feedback: (2)
Join Date: Mar 2004
Location: Coraopolis,
PA
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
RE: Please help!! I need info!
i would just break it in like a common used break in way...like just let it idle for 1 tank, run in circles at 1/4 throttle for one tank, 1/2 throttle circles for 1 tank, 3/4 throttle circles for 1 tank, and then 1 pulsing full throttle( pull to full throttle then let go) for 1 tank...and the last tank do pulsating full throttle for a little longer...maybe hold it in for 3-4 seconds and do it that way
also lety it cool inbetween tanks for 15-20 minutes or till its safe to touch without burning hand
also lety it cool inbetween tanks for 15-20 minutes or till its safe to touch without burning hand