mt2 diff prob
08-26-2005, 12:50 PM
#1
Member
Thread Starter
Join Date: Oct 2003
Location: durbannatal, SOUTH AFRICA
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
mt2 diff prob
hi.i dont know why but my mt2 diffs are troubling me.i already put a 2 washers on the ecah diff.there was no play at all.after 4 tanks with my os 18 the diff started to slip again.does anyone have any solutions because this is really irratating me.
08-30-2005, 01:25 PM
#3
Senior Member
My Feedback: (3)
Join Date: Jan 2005
Location: Macon,
GA
Posts: 22,095
Likes: 0
Received 0 Likes
on
0 Posts
RE: mt2 diff prob
Make sure you run the heavy-duty gears and when shimming you need a little play. All so make sure you are running the cast metal spider gears and not the pot metal ones. All so make sure you have your slipper clutch set right.
Here are some links
http://www2.towerhobbies.com/cgi-bin...7&I=LXJYM2&P=K
http://www2.towerhobbies.com/cgi-bin...?&I=LXBTA4&P=Z
Here are some links
http://www2.towerhobbies.com/cgi-bin...7&I=LXJYM2&P=K
http://www2.towerhobbies.com/cgi-bin...?&I=LXBTA4&P=Z
