i got a top .12
02-13-2006, 04:06 PM
#3
Senior Member
Join Date: Oct 2004
Location: Ocala,
FL
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
RE: i got a top .12
if you have a slide carb...
High speed : turn in closed, then 4 turns out.
Low Speed : turn out til flush with slide/linkage body, then turn in 3 and a half turns .
Mid Range : set flush
Idle : turn in til barrel is open .5mm
Rotary
High speed : same as above
Low speed : same as above
Mid Range : none
Idle: Same as above
High speed : turn in closed, then 4 turns out.
Low Speed : turn out til flush with slide/linkage body, then turn in 3 and a half turns .
Mid Range : set flush
Idle : turn in til barrel is open .5mm
Rotary
High speed : same as above
Low speed : same as above
Mid Range : none
Idle: Same as above
02-13-2006, 11:12 PM
#4
Senior Member
Thread Starter
Join Date: Mar 2005
Location: chino hills,
CA
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
RE: i got a top .12
thanks but burned 5 tanks of gas tuning and this motor kicks some seriouse *****
all i know about the motor is ron paris modified it and it has been in my neighbors garage for a year now
all i know about the motor is ron paris modified it and it has been in my neighbors garage for a year now
