scott36

My Feedback: (54)

I just picked up the gt 10 version 2 truck , its still in the box .

scott36

My Feedback: (54)

question ,,,, how the heck do you get the carb restrictor out of the carburetor, so far did 1 tank of break in, still cold out tho.

tattguy12

if you find out let me know, i didnt even know there was a restrictor in there..lol

ampresearch143

just grab a hold of it with some needle nose pliers and pull it right out. it just sits in the the intake.

tattguy12

is it the white piece?

scott36

My Feedback: (54)

yes it is the white piece of teflon. i took the carb off and tapped it out from the back side. still have not had a chance to run it again with the rain we are having tho.

tattguy12

i know, i swear we live in seattle..

scott36

My Feedback: (54)

tattguy12 were did you get your gt 10 from. lhs or on line.

tattguy12

hub hobby in roseville

scott36

My Feedback: (54)

got mine in burnsville at rc car kings, how are there prices, the hub hobby in rich field is like 25 bucks higher then were i got mine from

tattguy12

iw was $309.00 but i had a 50 dollar gift card and a coupn for 10% off..so total was like $251.00

scott36

My Feedback: (54)

good price with the gift card, the 10 % not down is about what i paid for mine. 275 tho i addeda hump back so i went out the door for 302 with tax. my hub hobby is over priced and they dont know crap or help a guy out much.

tattguy12

mines the same, i dont go there for parts or anything like that mostly online buying. are you going to race yours?

scott36

My Feedback: (54)

not going to race mine just wanted a basher to play with, i did almost get the new hpi fire storm but figured the gt has been around for ever. i fly helis as well so i keep busy trying to learn flying as well.

tattguy12

thats funny i actually back ordered a firestorm because all ive had was hpi products but then cancelled to buy this because im going to start racing this year and everyone that races in the minnesota series said to buy the gt2 because it was race ready and noone knew what the firestorm would be like with the new motor and all.

scott36

My Feedback: (54)

they had the firstorm at the rc car kings. and ive seen a vid of the fire storm that i was real impressed with but was told at hub hobby that they were not going to stock parts or carry the fire storm, they said there is to many 1/10 2wd drive trucks on the market to make room for a shelf of parts. ive also been poking around and the xtm seems to be a real good back yard basher as well for a mere 200.00 with a.18 engine to. this hobby drains a guys wallet real fast. now i want to add some new tires and get the original gt body to.

tattguy12

ya, ive been at cars for about a year. my wife told me to find a hobby...i dont think she meant one so expensive..lol

towertrainer

ehhhhh i took the truck out today for nitro practice at my local track, i was running good and real happy beacuse i found some tires i liked. about 3 runs into it i came over a jump and snapped one of my rear hinge pins in half and i also broke the rear arm. im going to call associated to see what they think about it.

sneff

I ran my new GT2 Sat night at my local track and I was very impressed with the handling!! I've had 4 Gt's over the years and this kit is by far the best design. The posi lock hubs work flawlessly. I put the basic set up on the truck and a couple things from Jared Tebos clay set up and the truck was very easy to drive. My only problem so far is not having the right tires for my local track. The clay is so hard that the only tire hooking up is a pink taper pin turned into a slick with trinity bomb one foams. So my truck is a little loose exiting corners sometimes. But other than that Congrats to Associated for designing a great truck!!!

scott36

My Feedback: (54)

I just finished 5 tanks of fuel for break in on my gt2, temps were around 32 deg so i ran well and got better with each tank. can wait for summer now...

towertrainer

Sneff, My track is a hard clay surface too... i used to run M3 bowties they were ok but then i switched to 4 pink tapper pins and i hook up great on the track.

Joebaby35

My Feedback: (14)

Has anyone seen these new Micro-t trucks from Team Losi???

This is not the Mini-t it is a Micro-t 1/36 scale!!

http://video.google.com/videoplay?do...+MICRO+T&hl=en

http://www.youtube.com/watch?v=MxDj77FsOzY

annie_himself

Sneff, Panther offers slicks you can try.

ImGoinRCn

Does the original rims fit the RTR GT2?

What's a Losi micro have to do with the GT2??

Joebaby35

My Feedback: (14)

This thread does not move so I thought I could get some posts going. Just thought is was interesting and thought I would see if anyone on the thread had seen it before.