JATO 3.3 Missing Front End!!
#1
Senior Member
Thread Starter
Join Date: May 2006
Location: miami, FL
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
JATO 3.3 Missing Front End!!
Hello, I was given today a jato 3.3 but it dosent have a front end. Can anyone please give me a parts list of what i need and estimate how much money it will take to get it back running?
#2
Senior Member
Join Date: Nov 2005
Location: Southern California,
CA
Posts: 6,912
Likes: 0
Received 0 Likes
on
0 Posts
RE: JATO 3.3 Missing Front End!!
I don't know about the Jato, but on ebay I get XXX-NT fronts and rear ends for about $15-20 shipped. So take a peak on ebay, see what they got.
#3
RE: JATO 3.3 Missing Front End!!
Here is all the parts you need for the front and how to put them together...
http://www.traxxas.com/products/nitr...xpld-front.pdf
Also ebay is the CHEAPEST place to get all jato parts...
http://www.traxxas.com/products/nitr...xpld-front.pdf
Also ebay is the CHEAPEST place to get all jato parts...
#4
RE: JATO 3.3 Missing Front End!!
it strip the motro down first and look everything over since looking at the clutch bell and all the metal screws it looks liek it has alot of rust on it, lord knows how the motor internals are
#5
RE: JATO 3.3 Missing Front End!!
ORIGINAL: MiamizFinest
it strip the motro down first and look everything over since looking at the clutch bell and all the metal screws it looks liek it has alot of rust on it, lord knows how the motor internals are
it strip the motro down first and look everything over since looking at the clutch bell and all the metal screws it looks liek it has alot of rust on it, lord knows how the motor internals are
#6
Senior Member
Thread Starter
Join Date: May 2006
Location: miami, FL
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
RE: JATO 3.3 Missing Front End!!
ORIGINAL: Nick2618
Here is all the parts you need for the front and how to put them together...
http://www.traxxas.com/products/nitr...xpld-front.pdf
Also ebay is the CHEAPEST place to get all jato parts...
Here is all the parts you need for the front and how to put them together...
http://www.traxxas.com/products/nitr...xpld-front.pdf
Also ebay is the CHEAPEST place to get all jato parts...
#8
Senior Member
Join Date: Apr 2008
Location: NAPERVILLE,
IL
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
RE: JATO 3.3 Missing Front End!!
yeah it should but first try using some WD-40, Be carefull thats how i got my car on fire But nothing bad happened so just wait like 10 mins before you start the engine
#9
Senior Member
Thread Starter
Join Date: May 2006
Location: miami, FL
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
RE: JATO 3.3 Missing Front End!!
CAN SOME ONE PLEASE TELL ME HOW TO GET THE GEARS OFF THE jato..i took the 3 screws and notes and spring off but it wont come off!!. Also how to i remove the E clip on the other gear?
#10
Senior Member
Join Date: Apr 2008
Location: NAPERVILLE,
IL
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
RE: JATO 3.3 Missing Front End!!
for the biger gear dont be afraid to use some force but it should be easy to take it of at least mine is maby the rust is like glued it together, so use some force. For the e clip use the screw driver
#11
Senior Member
Join Date: Nov 2007
Location: California, CA
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
RE: JATO 3.3 Missing Front End!!
Ok, that is the most rust I have seen on a rc car. But back on subject you will need a [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME1&P=Z]bulk head[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMF4&P=Z]bell crank[/link], I think you will need [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMF3&P=Z]this[/link] for the bell crank, [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME2&P=Z]stock a arms[/link] or [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXLXB2&P=Z]rpm a arms (black)[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME6&P=Z]stock bumper[/link] or [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMAH7&P=Z]rpm bumper (black)[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMF0&P=Z]stock upper turnbuckles[/link] or [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSCT9&P=Z]lunsford turnbuckle set[/link] or my favorite [link=http://www.jdcarbon.com/carbon-fiber/perrc/jato/]jd carbon turnbuckles[/link] or the [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKML7&P=Z]traxxas red turnbuckle kit[/link] lower turnbuckles [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME9&P=Z]stock lower turnbuckles[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSCT9&P=Z]lunsford turnbuckle kit[/link] or [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKML7&P=Z]traxxas red turnbuckle kit[/link], or [link=http://www.jdcarbon.com/carbon-fiber/perrc/jato/]jd carbon turnbuckle kit[/link], you will need [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME3&P=Z]caster and steering blocks[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKLZ6&P=Z]blue screws for pins[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMD2&P=Z]pins[/link] or [link=http://www.jdcarbon.com/carbon-fiber/perrc/jato/]jd carbon pins[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME8&P=Z]spindles[/link] [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMA4&P=Z]4 wheel berrings[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMA5&P=Z]wheel spacers[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMC9&P=Z]shock tower[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMC5&P=Z]front body posts[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMH2&P=Z]stock shocks[/link] or [link=http://cgi.ebay.com/NEW-Traxxas-REVO-COMPLETE-Aluminum-GTR-Shocks-JATO_W0QQitemZ310037565660QQihZ021QQcategoryZ44028 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem]revo shocks[/link] but you will want to put the jato pistons in, [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMB0&P=Z]stock spring[/link] or your choice in springs, and wheels of your choice. Oh yea you might want to get another spur, clutch bell, and a [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSFL2&P=Z]screw kit[/link] and replace all your rusted parts. Man, that took me atleast a half hour. Oh whell hopefully it is worth it to you.
#12
RE: JATO 3.3 Missing Front End!!
ORIGINAL: icecube0045
Thanks but the link dosent work
ORIGINAL: Nick2618
Here is all the parts you need for the front and how to put them together...
http://www.traxxas.com/products/nitr...xpld-front.pdf
Also ebay is the CHEAPEST place to get all jato parts...
Here is all the parts you need for the front and how to put them together...
http://www.traxxas.com/products/nitr...xpld-front.pdf
Also ebay is the CHEAPEST place to get all jato parts...
#15
RE: JATO 3.3 Missing Front End!!
ORIGINAL: icecube0045
Thanks a lot guys...
Is the flywheel on the bottom of the jato suppose 2 b able to move? cuz mine cant
Thanks a lot guys...
Is the flywheel on the bottom of the jato suppose 2 b able to move? cuz mine cant
#16
Senior Member
Join Date: Nov 2007
Location: California, CA
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
RE: JATO 3.3 Missing Front End!!
take a flat blade screw driver and try to turn your fly wheel with that. If it moves it is good if it doesn't whell your engine is toast.
#21
Senior Member
Join Date: Mar 2007
Location: biddeford,
ME
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
RE: JATO 3.3 Missing Front End!!
ORIGINAL: j8to33
Ok, that is the most rust I have seen on a rc car. But back on subject you will need a [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME1&P=Z]bulk head[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMF4&P=Z]bell crank[/link], I think you will need [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMF3&P=Z]this[/link] for the bell crank, [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME2&P=Z]stock a arms[/link] or [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXLXB2&P=Z]rpm a arms (black)[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME6&P=Z]stock bumper[/link] or [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMAH7&P=Z]rpm bumper (black)[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMF0&P=Z]stock upper turnbuckles[/link] or [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSCT9&P=Z]lunsford turnbuckle set[/link] or my favorite [link=http://www.jdcarbon.com/carbon-fiber/perrc/jato/]jd carbon turnbuckles[/link] or the [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKML7&P=Z]traxxas red turnbuckle kit[/link] lower turnbuckles [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME9&P=Z]stock lower turnbuckles[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSCT9&P=Z]lunsford turnbuckle kit[/link] or [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKML7&P=Z]traxxas red turnbuckle kit[/link], or [link=http://www.jdcarbon.com/carbon-fiber/perrc/jato/]jd carbon turnbuckle kit[/link], you will need [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME3&P=Z]caster and steering blocks[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKLZ6&P=Z]blue screws for pins[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMD2&P=Z]pins[/link] or [link=http://www.jdcarbon.com/carbon-fiber/perrc/jato/]jd carbon pins[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME8&P=Z]spindles[/link] [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMA4&P=Z]4 wheel berrings[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMA5&P=Z]wheel spacers[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMC9&P=Z]shock tower[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMC5&P=Z]front body posts[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMH2&P=Z]stock shocks[/link] or [link=http://cgi.ebay.com/NEW-Traxxas-REVO-COMPLETE-Aluminum-GTR-Shocks-JATO_W0QQitemZ310037565660QQihZ021QQcategoryZ44028 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem]revo shocks[/link] but you will want to put the jato pistons in, [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMB0&P=Z]stock spring[/link] or your choice in springs, and wheels of your choice. Oh yea you might want to get another spur, clutch bell, and a [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSFL2&P=Z]screw kit[/link] and replace all your rusted parts. Man, that took me atleast a half hour. Oh whell hopefully it is worth it to you.
Ok, that is the most rust I have seen on a rc car. But back on subject you will need a [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME1&P=Z]bulk head[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMF4&P=Z]bell crank[/link], I think you will need [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMF3&P=Z]this[/link] for the bell crank, [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME2&P=Z]stock a arms[/link] or [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXLXB2&P=Z]rpm a arms (black)[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME6&P=Z]stock bumper[/link] or [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMAH7&P=Z]rpm bumper (black)[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMF0&P=Z]stock upper turnbuckles[/link] or [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSCT9&P=Z]lunsford turnbuckle set[/link] or my favorite [link=http://www.jdcarbon.com/carbon-fiber/perrc/jato/]jd carbon turnbuckles[/link] or the [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKML7&P=Z]traxxas red turnbuckle kit[/link] lower turnbuckles [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME9&P=Z]stock lower turnbuckles[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSCT9&P=Z]lunsford turnbuckle kit[/link] or [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKML7&P=Z]traxxas red turnbuckle kit[/link], or [link=http://www.jdcarbon.com/carbon-fiber/perrc/jato/]jd carbon turnbuckle kit[/link], you will need [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME3&P=Z]caster and steering blocks[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKLZ6&P=Z]blue screws for pins[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMD2&P=Z]pins[/link] or [link=http://www.jdcarbon.com/carbon-fiber/perrc/jato/]jd carbon pins[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKME8&P=Z]spindles[/link] [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMA4&P=Z]4 wheel berrings[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMA5&P=Z]wheel spacers[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMC9&P=Z]shock tower[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMC5&P=Z]front body posts[/link], [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMH2&P=Z]stock shocks[/link] or [link=http://cgi.ebay.com/NEW-Traxxas-REVO-COMPLETE-Aluminum-GTR-Shocks-JATO_W0QQitemZ310037565660QQihZ021QQcategoryZ44028 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem]revo shocks[/link] but you will want to put the jato pistons in, [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMB0&P=Z]stock spring[/link] or your choice in springs, and wheels of your choice. Oh yea you might want to get another spur, clutch bell, and a [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSFL2&P=Z]screw kit[/link] and replace all your rusted parts. Man, that took me atleast a half hour. Oh whell hopefully it is worth it to you.
ok i have not seen so many hyperlinks in one post in my life[X(] and for the engine dude i would just replace the whole thing including clutch bell and slipper.
#24
Senior Member
Thread Starter
Join Date: May 2006
Location: miami, FL
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
RE: JATO 3.3 Missing Front End!!
If I replace the engine could I put any engine on it and would it work with the ez start? If so what would be the best motor for it?
#25
Senior Member
Join Date: Mar 2007
Location: biddeford,
ME
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
RE: JATO 3.3 Missing Front End!!
a little of that is your choice.you could either replace the stock engine with a new trx 3.3 or you could use O.S engines.......you can use the easy start with any trx engine and i'm not fully sure but i think O.S has a easy start backplate engine versions