Official RC10GT Thread
 

Your points lead.

Official RC10GT Thread
 

Don't you race r/c trucks?

Official RC10GT Thread
 

what Weight is the front shock oil that comes with the Gt plus??

Official RC10GT Thread
 

Dadam don't you race trucks?

Official RC10GT Thread
 

Nah, I just drive my rc10gt around my yard.

Official RC10GT Thread
 

Should be 30. Factory guys run 35 as a starting point. Shock oil has to match you spring rate. Stiffer spring needs heavier oil.

Official RC10GT Thread
 

yea I understand that, see I race oval and even though im the points leader I have been having some trouble turning while going full throotle, The front in the gt is so light and the stock wieght oil is too heavy. I need the suspension to be weak so My wheels will dig into the traction more.

Official RC10GT Thread
 

I don't have the slightest clue what mine is as far as wight.

Official RC10GT Thread
 

I think Im going to get some 10 wt this week.

Official RC10GT Thread
 

OH I thought you raced.Do you race anything I thought you had the points position for something!!!!

Official RC10GT Thread
 

I think that was nitroman saying he was the points leader.

Official RC10GT Thread
 

If you're talking about me, not yet. I just started with my truck a few weeks ago. I'll probably start at the beginning of 10th grade.

Official RC10GT Thread
 

wow. i just got the 4n1 clutch. it sure beats the hell out of the stock rtr plus clutch.

Official RC10GT Thread
 

I posted that I was the points leader not dadams

Official RC10GT Thread
 

Oh woops sorry got confused does anyone know how to get the clutch on the truck??I got all the ball bearings on it is just is not going in asll the way the clutch is not.It is not letting me get my e-clip on I cannot see the little slit where it goes on at.Anyone can help me let me know.

Official RC10GT Thread
 

Are you sure you have the bearings in right, the flanged part should be inside the bell.

Official RC10GT Thread
 

Both of them,Should I put The one that goes in first in the clutch housing and put it on like that or first put it on the shaft and then put the clutch on what do you think would be the easiest?Bud?

Official RC10GT Thread
 

First you put the clutch on the pegs on the flywheel. Then you put one flanged bearing (with the flange facing toward the flywheel) on the clutch nut. Then you put on the clutch bell. Then you put your second flange bearing (with the flange facing away from the motor) on the clutchnut in the clutchbell. Or you can place the flange bearings in the clutchbell before you put it on the clutch nut. Either way you really will probably not be able to see the groove where you are suppose to put the E clip. It is a tight fit. If you really want to see it the get a magnifying glass and look. you should be able to see it then. Take your time and follow the instruction in the manual or the ones I have given here. Those flange bearings can get expensive if you continue to throw them.

Official RC10GT Thread
 

Also if you do not have the manual you can go to www.teamassociated.com and get the RC10GT manual in a printable PDF version.

Official RC10GT Thread
 

No,I took it to the Hobby Shop and a piece of the other Flanged bearing was melted on my engine shaft,and was keeping the new flanged bearing to go on.So I got it fixed now.Does anybody know If I absolutely need another nut before each flanged bearing or something?And can my spur gear be rubbing against something in back or underneath the truck it sounds like it is rubbing against somethiing.Does anybody know about Go-carts?

go karts???
 

i built a couple...what about them?? i may be able to help...

Official RC10GT Thread
 

I cannot get it started It puts but it will not go it runs for 2 seconds and dies I sprayed starting fluid in it and it did not help thanks!!

Official RC10GT Thread
 

damn this is so annoying! I have the rc10gt plus rtr and when im about 100 yards away going full speed, it stops responding and crashes at full speed. Ive eliminated some possibilities and i narrowed it down to either the radio or the battery. i dont think its the battery because when i get close to it after the crash it starts working again. i definitely think its the radio. maybe its happening because i slipped when i was working on the car and stuck an exacto knife into the Rx, idno. :D
BTW The throttle return spring doesnt help if the radio dies, it only helps if the ball cup pops off the throttle arm

Official RC10GT Thread
 

get a fail safe!!

Official RC10GT Thread
 

Hey Electricfan,

It's the radio. If it's an AM type, It'll only reach about 300 ft/100yds.