RC10GT to SC10GT conversion
1 Attachment(s)
check these pics out let me know what you think? the conversion kits are for sale and i do have a ad for them this truck drives awesome and i would recomend to anybody with a RC10GT
|
RE: RC10GT to SC10GT conversion
i have seen that somewhere b4, it looks sweet. do you do a kit for the gt2??
|
RE: RC10GT to SC10GT conversion
i havent tried a GT2 yet but i want to just dont have one to work off of next is HPI MT2 4x4,LOSI XXX-NT
|
RE: RC10GT to SC10GT conversion
dam... would have jumped on it if you did a gt2 kit. how much does the gt kit cost?
|
RE: RC10GT to SC10GT conversion
1 Attachment(s)
35.00 bucks shipped
|
RE: RC10GT to SC10GT conversion
what hubs do you use so the short corse wheels fit on?
|
RE: RC10GT to SC10GT conversion
in my pics above the one with wheels on it has the stock SC10 wheels and tires no moding needed as long as your RC10GT has 3/16 cvd's and not the 1/4 3/16 is pretty standard on all GT's the other one in the pics with no wheels has AKA racing 17mm hub conversion that are also for the SC10 but works perfect on the GT too so you can use 1/8 buggy wheels on it i chose the RC10GT because it was the easy to convert and all stock/option parts are still in market and pretty cheap
|
RE: RC10GT to SC10GT conversion
1 Attachment(s)
a few new pics of truck number 2
|
RE: RC10GT to SC10GT conversion
How soon until the XXX-NT chassis is ready?
|
RE: RC10GT to SC10GT conversion
i need a stock chassis to work off of the guy who wanted me to make the conversion never sent me the chasssis and upper deck!
|
RE: RC10GT to SC10GT conversion
i bought one of the conversions still working on getting stuff. Bought how did you mount those bumpers?
|
RE: RC10GT to SC10GT conversion
Been outta the sport for a bit. Got an old Evader ST sittin around. Would the SC10 wheels also work on it? Mounting the body should be fairly easy. Figure it's another way to get some more life outta the old Evader. Also interesed in your MT2 conversion, got one of them layin around too!
|
RE: RC10GT to SC10GT conversion
1 Attachment(s)
i had to make a few more parts to make the stock SC10 bumpers work!
|
RE: RC10GT to SC10GT conversion
you will need to lengthen your evaders chassis, the SC10 has a longer wheelbase thats why i have chassis conversion for RC10GT! as far as the MT2 conversion, it has been put on hold for now, same as the LOSI XXX-NT the guy who wanted me to convert those models backed out i need one to work off of and i am not going to buy one the SC10GT is just perfect for me!
|
RE: RC10GT to SC10GT conversion
1 Attachment(s)
just got my buggy wheels / tires and truck 2 is finished
|
RE: RC10GT to SC10GT conversion
1 Attachment(s)
here are some new pics of kit version 2 and i will post a ad for these new kits soon
|
RE: RC10GT to SC10GT conversion
thats sick!! I cant wait to do myn up :D
|
RE: RC10GT to SC10GT conversion
Where is your add for the conversion. I just got my Old Gt back running I am ready for the upgrade.
|
RE: RC10GT to SC10GT conversion
Do you like the 17mm conversion better then the stock wheels? Im worried the engine wont have enough power. What do you think? By the way I pm'ed you my email and will have money sent by this week!
|
RE: RC10GT to SC10GT conversion
the ad is on RCU
|
RE: RC10GT to SC10GT conversion
i love the 17mm conversions! the stock sc10 rims-tires worked alright but lacked traction and ***** out way to fast. the buggy wheels-tires are only like 3/8 taller and can be rotated and my O.S. .18 has plenty of HP to spare!! if you compare the cost of stock sc10 to 1/8 buggy wheels-tires they are about the same and you get twice the life by rotating.
|
RE: RC10GT to SC10GT conversion
i got my conversion installed. still working on installing the body.
this is a cool way to breath life back into my rc10gt. i really like the looks of the sc trucks, but dont like the stability of them. this conversion is very stable does not roll like the traxxas slayer at all. i used my stock 2.2 wheels and tires and it drives great. will post pics after i get the body on it. |
RE: RC10GT to SC10GT conversion
it is alot more stable!!!! it will slide out before it rolls over it is a drivers style kind of truck
|
RE: RC10GT to SC10GT conversion
Here's a few pictures of my SC10GT. Ready to run but I haven't had time to pick up a new gel cell battery for the starter box.
http://i206.photobucket.com/albums/b...10GTIII009.jpg http://i206.photobucket.com/albums/b...C10GTIV001.jpg http://i206.photobucket.com/albums/b...C10GTIV007.jpg It's got a Novarossi 12R engine, JR 9100s for a steering servo, Hitech 5645 for throttle/brake, AKA Enduro tires on SC10 wheels. |
RE: RC10GT to SC10GT conversion
just picked up the sc10 rpm front bumper setup for my conversion.
just figured out that it does not connect to the front body post like the factory sc10 bumper. wondering if i should design a brace from the front body post to the rpm bumper or is it going to work fine without the brace? |
RE: RC10GT to SC10GT conversion
i dont think the bumper will serve the purpose without the support but it will look the same! the RPM bumpers need some of the stock SC10 bumpers parts, and the extra skid they provide doesnt work either
|
RE: RC10GT to SC10GT conversion
figured out the extra skid was useless.
will be using the stock sc10 rear bumper |
RE: RC10GT to SC10GT conversion
That is sooo freakin great to see!!!!!! I have a few shelf queen rc10gt's and now that i see this i would like to pick one up to see if i like the quality of parts. I might even let my r/c junkie friends who work at our local rc track know about this !!!! Im new here so im not sure how to contact you about getting a kit from you so yeah!
|
RE: RC10GT to SC10GT conversion
Can someone please get a video of a sc10gt or sc10gt2 conversion. I would really like to see what they are like in action. I am thinking of getting the new xtreme carbon gt2 conversion but I really would like to see that more people are interested in these. Thanks
|
RE: RC10GT to SC10GT conversion
i am as well. id like to know how to obtain one of these "kits" to sc up the gt let me know when you get a chance
|
RE: RC10GT to SC10GT conversion
1 Attachment(s)
Here is my conversion that Robert did for me! Alot of thought process in this. Thanks agian Robert! Will start racing the 16th :) Will report back on my sct races everyweek! So far I only got my servo but putting in an order today or tomm!!
|
RE: RC10GT to SC10GT conversion
the brushless conversion kit is turning out great! cant wait to see what kind of power you strap in
|
RE: RC10GT to SC10GT conversion
ROBERTPAGE,
I would like to order a chassis. Are you still selling them? What body mounts would you recommend for the stock SC10 body? |
RE: RC10GT to SC10GT conversion
ORIGINAL: robertpage the brushless conversion kit is turning out great! cant wait to see what kind of power you strap in |
RE: RC10GT to SC10GT conversion
ORIGINAL: eball ROBERTPAGE, I would like to order a chassis. Are you still selling them? What body mounts would you recommend for the stock SC10 body? |
RE: RC10GT to SC10GT conversion
Has anyone tried to convert a GT2 with this kit?
|
RE: RC10GT to SC10GT conversion
Hey guys it's probably going up for sale[:o] I need $$ for my b4 so I'm sad to say this might be gone. It will include all nitro components and the electric roller seen in the pics. Also include servo anyone interested lmk;) Thanks
|
RE: RC10GT to SC10GT conversion
|
RE: RC10GT to SC10GT conversion
I will sell you mine guys lmk
|
RE: RC10GT to SC10GT conversion
You have a conversion kit for sale? Post picture.
|
All times are GMT -8. The time now is 08:44 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.