The Phoenix new french F3A by CBmodélisme
#1
Member
Thread Starter
Join Date: Apr 2012
Location: St Hilaire de Chaléons, FRANCE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
The Phoenix new french F3A by CBmodélisme
CBmodélisme is proud to present its new model, the Phoenix.
[img][/img]
[img][/img]
Envergure: 1860mm
Longueur: 1998mm
Masse: 4.6 à 4.9kg selon équipement
Diamètre cone: 82mm
Motorisation: électrique, 4 temps, 2 temps glow, 2 temps essence
[img][/img]
All information is visible on our website: www.cbmodelisme.com
The first flights took place last week
The final adjustments and tuning will be performed this weekend by Christophe Paysant-Le Roux if the weather permits.
Best regards
Benoît Chauvet
CBmodélisme
8 le bois Guibert
44680 St Hilaire de Chaléons (FRANCE)
Phone: 06 71 01 87 91
www.cbmodelisme.com
[img][/img]
[img][/img]
Envergure: 1860mm
Longueur: 1998mm
Masse: 4.6 à 4.9kg selon équipement
Diamètre cone: 82mm
Motorisation: électrique, 4 temps, 2 temps glow, 2 temps essence
[img][/img]
All information is visible on our website: www.cbmodelisme.com
The first flights took place last week
The final adjustments and tuning will be performed this weekend by Christophe Paysant-Le Roux if the weather permits.
Best regards
Benoît Chauvet
CBmodélisme
8 le bois Guibert
44680 St Hilaire de Chaléons (FRANCE)
Phone: 06 71 01 87 91
www.cbmodelisme.com
#2
Member
Thread Starter
Join Date: Apr 2012
Location: St Hilaire de Chaléons, FRANCE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
#5
Member
Thread Starter
Join Date: Apr 2012
Location: St Hilaire de Chaléons, FRANCE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Phoenix new french F3A by CBmodélisme
Of course! The version with the T canalizer released within 2 weeks. T canalizer will be on the canopy, the canopy will have a specific support and it will be possible to put the canopy without the T canalizer.
The incidence of T canalizer will be adjustable.
It is possible to buy the version without the T canalizer and obtain the canopy and the T channelizer after.
The incidence of T canalizer will be adjustable.
It is possible to buy the version without the T canalizer and obtain the canopy and the T channelizer after.
#6
Member
Thread Starter
Join Date: Apr 2012
Location: St Hilaire de Chaléons, FRANCE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Phoenix new french F3A by CBmodélisme
The version without T canalizer works fine, here are the pictures of the first flights that took place perfectly!
#8
Member
Thread Starter
Join Date: Apr 2012
Location: St Hilaire de Chaléons, FRANCE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Phoenix new french F3A by CBmodélisme
Hello,
Christophe does not yet tried, the weather in France is very bad for now.
Christophe will be testing as soon as possible. I will share the results of the tests on the forum.
Christophe does not yet tried, the weather in France is very bad for now.
Christophe will be testing as soon as possible. I will share the results of the tests on the forum.
#10
Member
Thread Starter
Join Date: Apr 2012
Location: St Hilaire de Chaléons, FRANCE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
#13
Senior Member
RE: The Phoenix new french F3A by CBmodélisme
ORIGINAL: Lazer
Reminds me of another famous pattern plane by Don Lowe. His was also called the Phoenix. Think I would have used a different name.[8D]
Reminds me of another famous pattern plane by Don Lowe. His was also called the Phoenix. Think I would have used a different name.[8D]
#14
Join Date: Apr 2010
Location: Richmond, CA
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Phoenix new french F3A by CBmodélisme
Google Translate:
WhenBenoitannouncedthat he wantedmerealizedaF3Ahim, Iimmediatelyproposedto tryto givemy opinion,so it canofferin the marketpointedtothecompetitiveaerobaticsairplaneflight.
After a fewflightsandany adjustmentveryclose tomy Axiome,the qualities offlightis expectedthis type ofmodelare:accuracy,flexibility, triggeredeasy, fewmixes..It's your turn.CPLR
WhenBenoitannouncedthat he wantedmerealizedaF3Ahim, Iimmediatelyproposedto tryto givemy opinion,so it canofferin the marketpointedtothecompetitiveaerobaticsairplaneflight.
After a fewflightsandany adjustmentveryclose tomy Axiome,the qualities offlightis expectedthis type ofmodelare:accuracy,flexibility, triggeredeasy, fewmixes..It's your turn.CPLR
#15
Member
Thread Starter
Join Date: Apr 2012
Location: St Hilaire de Chaléons, FRANCE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Phoenix new french F3A by CBmodélisme
Thank you very much for the translation!
Here is the video tour of the Phoenix during testing by CPLR
http://youtu.be/_Nl88g_XOCQ
Here is the video tour of the Phoenix during testing by CPLR
http://youtu.be/_Nl88g_XOCQ
#16
Member
Thread Starter
Join Date: Apr 2012
Location: St Hilaire de Chaléons, FRANCE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
#20
Member
Thread Starter
Join Date: Apr 2012
Location: St Hilaire de Chaléons, FRANCE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Phoenix new french F3A by CBmodélisme
CBmodelisme was present at the FAI F3A European Championship 2012 in Chateauroux this weekend
#21
Member
Thread Starter
Join Date: Apr 2012
Location: St Hilaire de Chaléons, FRANCE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Phoenix new french F3A by CBmodélisme
Hello,
Today we are launching the PHOENIX ECO, same characteristics of PHOENIX but the fuselage is in fiberglass sandwich polystyrene.
For a 2-stroke engine this formula allows a multi very economical. There is obviously the possibility to install other types of engine.
Kit Price: 549 Euros
Exemple 2 strokes:
Benoît Chauvet
CBmodélisme
www.cbmodelisme.com
Today we are launching the PHOENIX ECO, same characteristics of PHOENIX but the fuselage is in fiberglass sandwich polystyrene.
For a 2-stroke engine this formula allows a multi very economical. There is obviously the possibility to install other types of engine.
Kit Price: 549 Euros
Exemple 2 strokes:
Benoît Chauvet
CBmodélisme
www.cbmodelisme.com
#22
RE: The Phoenix new french F3A by CBmodélisme
540 Euro for this kit is a very decent price.. for this F3A ship very good. But using a gas engine is something i have never seen anyone fly at the championships.. just saying. I would rather go electric with this plane
#23
Member
Thread Starter
Join Date: Apr 2012
Location: St Hilaire de Chaléons, FRANCE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Phoenix new french F3A by CBmodélisme
Hello,
The example of the gasoline engine is only economic proposition. It is quite possible to install an electric motor or yamada in PHOENIX ECO
Benoît Chauvet
CBmodélisme
The example of the gasoline engine is only economic proposition. It is quite possible to install an electric motor or yamada in PHOENIX ECO
Benoît Chauvet
CBmodélisme
#24
RE: The Phoenix new french F3A by CBmodélisme
my only reason to avoid the gas engine is they cant perform well in the masters sequence in comparison to a YS or electric power.
#25
Senior Member
RE: The Phoenix new french F3A by CBmodélisme
ORIGINAL: highfly3D
my only reason to avoid the gas engine is they cant perform well in the masters sequence in comparison to a YS or electric power.
my only reason to avoid the gas engine is they cant perform well in the masters sequence in comparison to a YS or electric power.
You don't really know what you are talking about, do you? I invited you to come down and watch my gas powered pattern plane fly Masters, F3A or whatever. Then you go throwing uneducated comments like that one out there. Absurd!