Rock-n-Roll 2 Meter ARF Ultra RC
#2
Member
Join Date: Jan 2006
Location: London,
KS
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rock-n-Roll 2 Meter ARF Ultra RC
Greetings,
I don't have one but I've been looking at it really hard for my next project. Anyone have any comments on this bird?
Best Regards,
The Dude
I don't have one but I've been looking at it really hard for my next project. Anyone have any comments on this bird?
Best Regards,
The Dude
#3
Senior Member
My Feedback: (51)
Join Date: Jul 2002
Location: Ashland, KY
Posts: 5,833
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rock-n-Roll 2 Meter ARF Ultra RC
They've only been recently added to their site... so there's not going to be a lot of people able to respond...
It's a sharp looking ship... and lightweight...
It's a sharp looking ship... and lightweight...
#4
RE: Rock-n-Roll 2 Meter ARF Ultra RC
I saw one up-close half in and out of the box. I liked the general look of it and really liked the potential weight. I know that they fly very well but can't attest to it first hand yet.
I would have built one by now if I had not decommissioned and moved my workshop over the last three weeks. I now have a couple of sport and scale reviews to complete first so I may have to wait a little. On the other hand if I get the "bug" you all know what happens next
Back to typing elsewhere - Eric.
I would have built one by now if I had not decommissioned and moved my workshop over the last three weeks. I now have a couple of sport and scale reviews to complete first so I may have to wait a little. On the other hand if I get the "bug" you all know what happens next
Back to typing elsewhere - Eric.
#5
RE: Rock-n-Roll 2 Meter ARF Ultra RC
Hallo to all
I have the Plane. It is better build then the E-Evolution. The main landing gear is implemented better. I think it's OK.
look on my website. But it is only in German[][] http://www.members.aon.at/crazyf3a
SR crazyf3a
I have the Plane. It is better build then the E-Evolution. The main landing gear is implemented better. I think it's OK.
look on my website. But it is only in German[][] http://www.members.aon.at/crazyf3a
SR crazyf3a
#6
Senior Member
Join Date: Oct 2002
Location: Brookland, AR
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rock-n-Roll 2 Meter ARF Ultra RC
#7
Senior Member
Join Date: Jan 2004
Location: La Herradura Edo. de Mexico, 53920 MEXICO
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rock-n-Roll 2 Meter ARF Ultra RC
Hmmmm.
I just happen to have an OS 140RX, header and ES pipe looking for a home; JR servos ready to go. Price looks OK too.
Well, that did´nt take too long did it....
Eric H.
You probably have one by now.
Does it require much modification for a firewall - Hyde mount estalation?
Does Ultra RC ship outside the US?
Thanks.
I just happen to have an OS 140RX, header and ES pipe looking for a home; JR servos ready to go. Price looks OK too.
Well, that did´nt take too long did it....
Eric H.
You probably have one by now.
Does it require much modification for a firewall - Hyde mount estalation?
Does Ultra RC ship outside the US?
Thanks.
#8
Senior Member
My Feedback: (51)
Join Date: Jul 2002
Location: Ashland, KY
Posts: 5,833
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rock-n-Roll 2 Meter ARF Ultra RC
Just an FYI...
Ultra RC is having a Black Friday Weekend Sale through Sunday Midnight... this plane is $60 off regular price!
http://www.ultra-rc.com/blackfriday
Rodney...
Yes Ultra RC ships outside the U.S. You need to call for actual shipping charges though...
Ultra RC is having a Black Friday Weekend Sale through Sunday Midnight... this plane is $60 off regular price!
http://www.ultra-rc.com/blackfriday
Rodney...
Yes Ultra RC ships outside the U.S. You need to call for actual shipping charges though...
#10
Senior Member
Join Date: May 2004
Location: Mt. Holly,
NJ
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rock-n-Roll 2 Meter ARF Ultra RC
ORIGINAL: pachemin
ye I have one but doesnt have intruccions
ye I have one but doesnt have intruccions
Sorry for the delay. We didn't want to hold-up your shipment due to the manuals not being in from our printers yet. The manuals were sent this past Monday. Please contact me with any specific questions. I will be monitoring our email all weekend. Thank you for your business and support.
Ultra-RC
#11
RE: Rock-n-Roll 2 Meter ARF Ultra RC
Sorry to say that I have been travelling up and down the east coast (children and grandchildren support!) with a house-move in the midlle, for the last month. Severly curtailed my building. Only got one GP Pitt's special assembled during October. I'll soon catch up when I get all of my tools out of storage.
Regards,
Eric.
Regards,
Eric.
ORIGINAL: rodney tanner
Hmmmm.
I just happen to have an OS 140RX, header and ES pipe looking for a home; JR servos ready to go. Price looks OK too.
Well, that did´nt take too long did it....
Eric H.
You probably have one by now.
Does it require much modification for a firewall - Hyde mount estalation?
Does Ultra RC ship outside the US?Thanks.
Hmmmm.
I just happen to have an OS 140RX, header and ES pipe looking for a home; JR servos ready to go. Price looks OK too.
Well, that did´nt take too long did it....
Eric H.
You probably have one by now.
Does it require much modification for a firewall - Hyde mount estalation?
Does Ultra RC ship outside the US?Thanks.
#12
Senior Member
Join Date: Jan 2004
Location: La Herradura Edo. de Mexico, 53920 MEXICO
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rock-n-Roll 2 Meter ARF Ultra RC
Rodney...
Yes Ultra RC ships outside the U.S. You need to call for actual shipping charges though...
Yes Ultra RC ships outside the U.S. You need to call for actual shipping charges though...
I ended up using an importer. Better to get gently screwed on his mark and customs up rather than royally screwed after UPS get it through customs!! :-(
It should get here before Christmas.
#13
Senior Member
Join Date: May 2003
Location: Atlanta, GA
Posts: 1,012
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rock-n-Roll 2 Meter ARF Ultra RC
I shared some info about this plane here http://www.rcuniverse.com/forum/m_5046990/tm.htm If you want to take a look
#14
Member
Join Date: Jan 2006
Location: London,
KS
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rock-n-Roll 2 Meter ARF Ultra RC
Greetings,
What do you think of this plane with this engine? [link=http://www.rcshowcase.com/html/RCS/rcs140se.html]RCS 140 Gas Engine[/link] It is about 4 oz heaver than an OS 1.60 which on a plane this size should'nt be an issue.
Regards,
The Dude
What do you think of this plane with this engine? [link=http://www.rcshowcase.com/html/RCS/rcs140se.html]RCS 140 Gas Engine[/link] It is about 4 oz heaver than an OS 1.60 which on a plane this size should'nt be an issue.
Regards,
The Dude
#15
Senior Member
My Feedback: (1)
Join Date: Oct 2002
Location: Woodstock, GA
Posts: 2,707
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rock-n-Roll 2 Meter ARF Ultra RC
"Virtuoso"? Just curious, but I remember Chris Hinson of Extreme Flight was working on a similar plane with that name. Is that the same plane or just a coincidence?
-Mike
-Mike
#18
Senior Member
Join Date: May 2004
Location: Mt. Holly,
NJ
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rock-n-Roll 2 Meter ARF Ultra RC
ORIGINAL: MHester
"Virtuoso"? Just curious, but I remember Chris Hinson of Extreme Flight was working on a similar plane with that name. Is that the same plane or just a coincidence?
-Mike
"Virtuoso"? Just curious, but I remember Chris Hinson of Extreme Flight was working on a similar plane with that name. Is that the same plane or just a coincidence?
-Mike
Ultra-RC
#19
Senior Member
Join Date: May 2003
Location: Atlanta, GA
Posts: 1,012
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rock-n-Roll 2 Meter ARF Ultra RC
Thanks for the additional info. I fully agree that the plane is a blast. Very true in the air. I am happy to have spare parts if I need them, as that is one thing that concerned me.
As a matter of fact, I need to get new landing gear for mine. My gear that came with the kit seemed to be a hybrid and has some flex to it. I also need an additional 1-2 " of clearance to be ablt to swing a 20" prop. The 19X12 I have on there now is as high as I can go with the current gear.
As a matter of fact, I need to get new landing gear for mine. My gear that came with the kit seemed to be a hybrid and has some flex to it. I also need an additional 1-2 " of clearance to be ablt to swing a 20" prop. The 19X12 I have on there now is as high as I can go with the current gear.
#21
Senior Member
Join Date: May 2003
Location: Atlanta, GA
Posts: 1,012
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rock-n-Roll 2 Meter ARF Ultra RC
No. There arent really any local contests and with work and family it isnt a possibility at this time due to the travel involved. I can get 10 minutes of solid flight out of my 10S 5400 packs, so that should be plenty for one round, but a second set would be needed to fully compete for a day.
ORIGINAL: wildnloose
Mike,
Have you ever competed in a pattern contest with this plane??
Mike,
Have you ever competed in a pattern contest with this plane??
#23
Senior Member
Join Date: Feb 2006
Location: mullen,
NE
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rock-n-Roll 2 Meter ARF Ultra RC
I'm ordering this plane this afternoon. I want a nice flying plane to improve my flying skills the 3d planes are fun but this summer I was flying with a pattern flyer and noticed how smooth he flew. I think this plane will help me improve not only that but it's pretty cool looking. I also went to the bob seger concert in Kansa city in december. So i need some more of good ole time rock-n-roll hope the plane fllies as good as bob performed that night.
#24
Senior Member
My Feedback: (1)
Join Date: Oct 2002
Location: Woodstock, GA
Posts: 2,707
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rock-n-Roll 2 Meter ARF Ultra RC
ORIGINAL: Mike Parsons
No. There arent really any local contests and with work and family it isnt a possibility at this time due to the travel involved. I can get 10 minutes of solid flight out of my 10S 5400 packs, so that should be plenty for one round, but a second set would be needed to fully compete for a day.
No. There arent really any local contests and with work and family it isnt a possibility at this time due to the travel involved. I can get 10 minutes of solid flight out of my 10S 5400 packs, so that should be plenty for one round, but a second set would be needed to fully compete for a day.
ORIGINAL: wildnloose
Mike,
Have you ever competed in a pattern contest with this plane??
Mike,
Have you ever competed in a pattern contest with this plane??
Also there is one the first weekend of June at Mac Hodges place, and the district championship at Ga Jets around mid October. And that's just 3 that are fairly close by....
-Mike
#25
RE: Rock-n-Roll 2 Meter ARF Ultra RC
o.k., I have 2 engines that I can use but I do not know which way to go, OS 160 and ys 140 sport. Anyone care to give their opinions on this one???