|
RE: ARIXTRA Build Thread by ISAAC NAJARY
1 Attachment(s)
Step 1 = Covering before painting.
|
RE: ARIXTRA Build Thread by ISAAC NAJARY
1 Attachment(s)
Weights after step 1 = 1,323 gram (821+160+84+111+123+24)
|
RE: ARIXTRA Build Thread by ISAAC NAJARY
1 Attachment(s)
Step 2 = Assembling the canopy and the belly pan.
|
RE: ARIXTRA Build Thread by ISAAC NAJARY
1 Attachment(s)
Weights after step 2 = 1,330 gram (1,072+111+123+24)
|
RE: ARIXTRA Build Thread by ISAAC NAJARY
1 Attachment(s)
Step 3 = Drawing the scheme on transparent drawing paper.
|
RE: ARIXTRA Build Thread by ISAAC NAJARY
Who is the manufacturer of the wheel pants Isaac?
|
RE: ARIXTRA Build Thread by ISAAC NAJARY
ORIGINAL: najary ORIGINAL: crazyf3a Hi Your Painting is not so light. You build very light, your covering is very light. In my opinion your fuselage painting is heavy. I think there gives another lighter colors for painting. (One component color) And then you can Save weight on fuselage painting. This is only a idea for Save weight. Andreas You right that Monolayer paint is lighter then the two layers paint. But in my opinion the two layers paint is much more beautiful and luxuriant. So I am willing to pay the price. Best regards, Isaac Najary |
RE: ARIXTRA Build Thread by ISAAC NAJARY
ORIGINAL: Strat2003 Who is the manufacturer of the wheel pants Isaac? I bought them in the last EC from Bert Delaere: http://www.aerobertics.be/productDet...at=10&brand=63 Best regards, Isaac Najary |
RE: ARIXTRA Build Thread by ISAAC NAJARY
On the topic of carbon components, how tall is the landing gear? Did that come with the kit, or where is it from?
I just bought my first house. It will have an airplane shop. Thank you again for the inspiration and the advice and pics. It will take some time, but I will show pics of the shop and my first true builds. |
RE: ARIXTRA Build Thread by ISAAC NAJARY
ORIGINAL: gaRCfield On the topic of carbon components, how tall is the landing gear? Did that come with the kit, or where is it from? I just bought my first house. It will have an airplane shop. Thank you again for the inspiration and the advice and pics. It will take some time, but I will show pics of the shop and my first true builds. The landing gear comes with the kit, it is 20 cm tall. Best regards, Isaac Najary |
RE: ARIXTRA Build Thread by ISAAC NAJARY
Joe, I think that the gear is similar to the one that is sold here: http://www.bondaero.co.uk/Carbon_uca...2_4986761.aspx , which has all the dimensions listed.
|
RE: ARIXTRA Build Thread by ISAAC NAJARY
1 Attachment(s)
Step 4 = Preparing Bristol paper patterns.
|
RE: ARIXTRA Build Thread by ISAAC NAJARY
1 Attachment(s)
Step 5 = Preparing patterns made of perforation paper, (right and left).
|
RE: ARIXTRA Build Thread by ISAAC NAJARY
1 Attachment(s)
respect...
|
RE: ARIXTRA Build Thread by ISAAC NAJARY
1 Attachment(s)
Step 6 = Painting the colors.
Thinning the paint by 50% with Acrylic thinner (2 parts paint, 1 part thinner). |
RE: ARIXTRA Build Thread by ISAAC NAJARY
1 Attachment(s)
Step 6 (continuation) = Painting the colors.
|
RE: ARIXTRA Build Thread by ISAAC NAJARY
Isaac, are you still using the paint sprayer from HK? I assume you must like it, if so.
|
RE: ARIXTRA Build Thread by ISAAC NAJARY
ORIGINAL: gaRCfield Isaac, are you still using the paint sprayer from HK? I assume you must like it, if so. Yes, I am still using the paint sprayer from HK, I really like it. Best regards, Isaac Najary |
RE: ARIXTRA Build Thread by ISAAC NAJARY
1 Attachment(s)
Step 6 (continuation) = Painting the colors.
|
RE: ARIXTRA Build Thread by ISAAC NAJARY
Najary,
Nice to see the entire painting process unfolding. One question about the use of "patterns made of perforation paper" (ref. post #241). Is the perforation paper stick on the back, as I can not figure out if masking tapes have been applied to hold the pattern in place. Thanks |
RE: ARIXTRA Build Thread by ISAAC NAJARY
ORIGINAL: nonstoprc Najary, Nice to see the entire painting process unfolding. One question about the use of ''patterns made of perforation paper'' (ref. post #241). Is the perforation paper stick on the back, as I can not figure out if masking tapes have been applied to hold the pattern in place. Thanks Yes the perforation paper stick on the back. The masking tapes have been applied to make only the straight lines and to stick the brown covering paper. Best regards, Isaac Najary |
RE: ARIXTRA Build Thread by ISAAC NAJARY
Najary,
Thanks for the confirmation. Can you please provide some info on the type of the perforation paper used and where you got it? Thanks again. |
RE: ARIXTRA Build Thread by ISAAC NAJARY
ORIGINAL: nonstoprc Najary, Thanks for the confirmation. Can you please provide some info on the type of the perforation paper used and where you got it? Thanks again. The Perforation Paper compounds from two parts: A white paper with glue on one side and an azure paper that protects the glue, It comes as a big roll. I purchased it about 10 years ago, I was told that it named "Perforation Paper" and usually it is use by architects and I think it is produce by 3M. That is all I know about it. I tried to find it on the internet but couldn't. Maybe some one cane helps us? Best Regards, Isaac Najary |
RE: ARIXTRA Build Thread by ISAAC NAJARY
this paper isnt the same paper that are applied to stickers that are used to transfer it to the surface ???
I have used this to smal airbrush works easy to cut and works as a masking "tape" , dont know hows making it but comes on a big wide roll |
RE: ARIXTRA Build Thread by ISAAC NAJARY
Paper tape for use of application of stickers is APPLICATION TAPE.
The film shown in pics looks to me to be FRISK film used for masking comes on a large roll ,very low tack. great work. rgds steve |
| All times are GMT -8. The time now is 08:53 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.