Vintage radio Conversion to 2.4
#1
Thread Starter
My Feedback: (21)
Join Date: Dec 2001
Location: York,
PA
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
Vintage radio Conversion to 2.4
This has probably been asked before, but here goes. I have some vintage radios (Kraft, Hobby Lobby) that I would like to put into some vintage airplanes that I am building (yes from kits) over the winter. Anybody know where I can get them converted to 2.4, either Spectrum/JR or Futaba/Hitec will do. Any info would be appreciated.
Thanks,
Jim
Thanks,
Jim
#4
My Feedback: (27)
RE: Vintage radio Conversion to 2.4
Here is some information on a Kraft Spectrum 6 conversion I did. I have also done a conversion on a Kraft series 74.
http://www.rcuniverse.com/forum/m_10072737/tm.htm
http://www.rcuniverse.com/forum/m_10072737/tm.htm
#5
My Feedback: (1)
RE: Vintage radio Conversion to 2.4
Jim I had success converting my old Orbit to 2.4 using the Hitec 2.4 module and of course the Hitec 2.4 Rx in my case the Optima 7.
http://www.rcuniverse.com/forum/m_10224254/tm.htm
John
http://www.rcuniverse.com/forum/m_10224254/tm.htm
John