9C helicopter programing
#1
Junior Member
Thread Starter
Join Date: Nov 2006
Location: rochelle, GA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
9C helicopter programing
Is it posible to program one model with heli programing and not lose all my airplane programing?I know my old 6XA is either or but not sure with the 9C.any advice would be greatly apreciated.
#2
Senior Member
Join Date: Sep 2008
Location: DAYTON,
OH
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
RE: 9C helicopter programing
On my 9C Super, after you select a new model, you can go to the PARAMETER menu (Basic Menu / second page) and select Airplane, Heli, or Glider. The Heli supports six different swash types. Look at the manual for the specific servo locations for each swash plate type.
Best... Roger Parrett / Dayton / OH
Best... Roger Parrett / Dayton / OH
#5
My Feedback: (11)
RE: 9C helicopter programing
Raptor 50 programming can be found at http://www.raptortechnique.com and Google "finless setup videos" to find how-to videos to setup the CCPM Trex