690B

Hello,
I am new in the Futaba 14SG. Anyone knows how to setup the Flaprons on this Radio?
Appreciate any help, thank you

flyinwalenda

My Feedback: (5)

I don't believe that radio has a flaperon feature program. You could try the Airbrake feature and set the ailerons to move down when active or use a Mix.

Truckracer

My Feedback: (19)

Please ask your question in the Futaba direct support forum above. You should get some excellent help there. You may want to note whether you are using separate flaps and ailerons or just wanting to lower the ailerons as flaps.

RWHorton

Use the air break program. I use it on my cosmic wind with a tad of up dialed in, helps slow the plane for landing.

Ron

690B

Hello,
I can’t get any help from Futaba Support in Europe, still waiting an answer from them for a month now.
Thank you for the help, I will try the Airbrake function and see how it goes.
Thank you all
José

FUTABA-RC

The programming on the 14SG is similar to the 12FG that preceded it. Take a look at this FAQ question:

https://www.futabarc.com/faq/faq-12fg-q1154.html

Also, the Futaba vendor support forum here on RCU, while sponsored by Hobbico, answers questions regardless of your location

Let me know if this answers your questions

miola

Hello colleagues!
Who can answer the question - is it possible to see the GPS coordinates on the screen of Futaba T14SG?
Can I write them to a log file?
There is a description regarding this in firmware 1.51 (see picture!).
But, unfortunately, there is no description of this in nevest versions of the firmware.
Russian Futaba's technical support does not answer this question.

FUTABA-RC

If you are using a FASSTest telemetry type RX and the SBS-01G GPS sensor then you can display the LAT/LONG of your model. You can also log this information