Elevator Flap mixing
#1
Senior Member
Thread Starter
Join Date: Mar 2003
Location: Mc Cleary, WA
Posts: 665
Likes: 0
Received 0 Likes
on
0 Posts
Elevator Flap mixing
I have a 6XES and super 7 futaba radios and I cant get the elevator to work with the flap nob but the flaps will work with the elev. stick. I have tried the 2-6 mix but cant seem to make it work. Have tried the 2 p mix channels and that doesnt work either. any help is appreaciated
HAPPY NEW YEAR
Lonnie
HAPPY NEW YEAR
Lonnie
#2
My Feedback: (90)
Join Date: Dec 2001
Location: Elephant Butte, N.M.
Posts: 6,715
Likes: 0
Received 2 Likes
on
2 Posts
RE: Elevator Flap mixing
I'm not all that sharp on Futaba, but it sounds like you may have the elevator set as the master, and the flap as slave. If you swap them out, so the flap is the master that may take care of your problem. Assuming you are tring to get the elevator to copensate for pitch change, when the flaps are deployed.
Good Luck.
Good Luck.
#3
Senior Member
Thread Starter
Join Date: Mar 2003
Location: Mc Cleary, WA
Posts: 665
Likes: 0
Received 0 Likes
on
0 Posts
RE: Elevator Flap mixing
THATS exactly what I am trying to do.I have changed the master and slave and thats not the problem.When I put the ch.6 switch in the on position and turn the flap switch knob the flaps lower but no elev. but if I use the elev. stick the flaps will lower.I have followed the book but cant seem to make it work on either radio
HAPPY NEW YEAR
Lonnie
HAPPY NEW YEAR
Lonnie