good reciever for a JR9303
#1
Senior Member
Thread Starter
Join Date: Jul 2004
Location: Wisconsin Rapids,
WI
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
good reciever for a JR9303
I was wondering what would make for a good all around reciever for the JR9303.
Im gettinf a R469 with thge heli vertion and was considering what would be a good aftermarket or afordable JR reciever to add to my other planes I will need at least 7 channels for a 28% edge so a pcm reciever would be prefered. Also will this transmiter work with a Hitec Electron 6-Channel FM Receiver JR/Air Z? I have a few foamy plans for the winter
Im gettinf a R469 with thge heli vertion and was considering what would be a good aftermarket or afordable JR reciever to add to my other planes I will need at least 7 channels for a 28% edge so a pcm reciever would be prefered. Also will this transmiter work with a Hitec Electron 6-Channel FM Receiver JR/Air Z? I have a few foamy plans for the winter
#2
My Feedback: (8)
Join Date: Dec 2002
Location: Leesburg, VA
Posts: 1,366
Likes: 0
Received 0 Likes
on
0 Posts
RE: good reciever for a JR9303
The 649 is a great receiver. I have about 5-6 of them and never had a problem. I just got a 770PCM and have about 20 flights with it. It has been solid the whole time. A JR PCM receiver for $99 is a real bargain. The Hitec will work in PPM mode if you want to go that way for a foamy - but the JR 610 works very well in a foamy (I have 2).
#4
My Feedback: (1)
RE: good reciever for a JR9303
You can't beat the little JR 770, 7-channel PCM receivers for $99.99. I use them with me 8103s. I have rarely ever needed 8 channels, 2 aileron, 2 elevator, rudder & throttle and, of course, the useless gear, except in rare cases. That makes 7. Excellent receiver.