DBono99

My Feedback: (1)

Hi All Let me start off by saying I been building and setting up planes for the past five years.. I've NEVER came across this strange problem..

I just got my new Futaba 6EXAS, well thats what I ordered but I recieved a 6EXAP. What the P stands for I have no idea..OK now on to the problem.. When i tried to set up Model #1, all the servo's did were chatter.. There was NO control from any of the sticks.. But with the RX still truned on I went to another model, the chatter stopped.
With thr RX still on if I go back to model #1 the chatter is gone and every thing wroks as it should..Now If I wanted to start on model # the chatter returns..HELP!!!

Also with my old RX the Futaba 6XAS with same channel/42 as the EXAS every works NO chatter what so ever??

Thanks Dan
PS If anyone knows the difference between the 6EXAS and the 6EXAP let me know..probably no differnce

DBono99

My Feedback: (1)

Hi I made an oopps .. I was in PPM mode for model #1.. Changed to PCM problemsolved.. Some times it pays to read the manual..LOL


Dan

PS Still haven't a clue about P.. Tower wants me to send it back??

piper_chuck

My Feedback: (12)

I believe the P stands for PCM. The new 6EXAS systems come with the 6EXAP transmitter, which is are PCM capable.