Question about these servos?
07-17-2005, 11:27 PM
#1
Junior Member
Thread Starter
Join Date: May 2005
Location: , CA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Question about these servos?
I am looking into the Blue Bird Mos-Fet servos model BMS-660MG+HS. Does anyone have experience with these? Specs are as follows. Your help is appreciated!
Torque: (4.8v) 12.6kg / 176oz
Trasmit time: (4.8v) 0.20 sec / 60 degrees
Torque(6.0v) 14.2 kg / 190oz
transmit time: (6.0v) 0.17 sec / 60 degrees
ball bearings: Dual
Op voltage: 4.8 / 6.0 volt
Torque: (4.8v) 12.6kg / 176oz
Trasmit time: (4.8v) 0.20 sec / 60 degrees
Torque(6.0v) 14.2 kg / 190oz
transmit time: (6.0v) 0.17 sec / 60 degrees
ball bearings: Dual
Op voltage: 4.8 / 6.0 volt
