older Futaba FP-T8SSH-P trying to resurrect
09-04-2005, 10:27 AM
#1
Junior Member
Thread Starter
My Feedback: (6)
Join Date: Dec 2003
Location: Champaign, IL
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
older Futaba FP-T8SSH-P trying to resurrect
Hello everyone. I have a (approx) 15 year old Futaba radio system that is NIB. It is a single stick PCM system. Here is the interesting part. The receiver is for the ham flying band, set to frequency 53.400 mhz. The Tx module is a FP-TF-FM and is set to channel 12 (73.030 MHz).
My question is: Can a replacement Tx module be purchased anywhere? Or could the existing module be tuned to 53.400 MHz? This is a pre narrow band radio, but I believe the ham frequencies do not require the narrow band equipment. The tech ticket is pretty easy to get with the no code test now.
Thanks for any advice,
David
My question is: Can a replacement Tx module be purchased anywhere? Or could the existing module be tuned to 53.400 MHz? This is a pre narrow band radio, but I believe the ham frequencies do not require the narrow band equipment. The tech ticket is pretty easy to get with the no code test now.
Thanks for any advice,
David
