Tx suggestion for Trex 450SE
#1
Member
Thread Starter
Join Date: Jul 2006
Location: , AUSTRALIA
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Tx suggestion for Trex 450SE
I just recently purchased a great conditioned complete 2nd hand Trex 450SE, as a upgrade from my Walkera 22e. Now all I need is a proper Tx. Not sure which Tx to get. I'm hoping to get a pan & tilt camera base for the Trex later down the track, not sure how to drive it from a Tx thats more than 6 ch if I can? Model comes with the standard Align 6ch 36Mhz Rx & a digital tail servo.
Have my eyes on the following Tx's -
- JR 2610 as a cheapy & upgrade later.
- JR PCM9x
- Futaba 9CHPS (Only $100 more than the 7CHP)
- Spektrum DX6 (Not as wiz bang as the above & have to install new Rx)
Any recommendations on the above Tx's that would best suit the 450SE. I know it would probably come down to personal preference to the layout & how easy its to program. My experience has only been with a 2Ch Sanwa (Gliders) & a 6Ch cheapo Walkera TX.. Also don't have any local hobby shops that sell them so have to mail order & dont know how it feels.
Thanxs.
Have my eyes on the following Tx's -
- JR 2610 as a cheapy & upgrade later.
- JR PCM9x
- Futaba 9CHPS (Only $100 more than the 7CHP)
- Spektrum DX6 (Not as wiz bang as the above & have to install new Rx)
Any recommendations on the above Tx's that would best suit the 450SE. I know it would probably come down to personal preference to the layout & how easy its to program. My experience has only been with a 2Ch Sanwa (Gliders) & a 6Ch cheapo Walkera TX.. Also don't have any local hobby shops that sell them so have to mail order & dont know how it feels.
Thanxs.