PCM RX for Futaba 6EXAP
#1
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Doha, QATAR
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
PCM RX for Futaba 6EXAP
I recently purchased a new Futaba 6EXAP system; PPM/PCM. It came with a R136F receiver which is FM.
I am wanting to get some additional receivers for other planes, but I want PCM not FM.
The manual indicates this system could come with either a R127DF or an R136F. Tower Hobbies has discontinued the R127DF
What other receivers would work with this transmitter? I cannot find an indication in the manual or on the box if this is 1024 or 512; I think I read that 1024 RX will not work with 512 Tx.
Thanks and regards
I am wanting to get some additional receivers for other planes, but I want PCM not FM.
The manual indicates this system could come with either a R127DF or an R136F. Tower Hobbies has discontinued the R127DF
What other receivers would work with this transmitter? I cannot find an indication in the manual or on the box if this is 1024 or 512; I think I read that 1024 RX will not work with 512 Tx.
Thanks and regards
#2
Senior Member
Join Date: Oct 2005
Location: Winston-Salem, NC
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
RE: PCM RX for Futaba 6EXAP
Will work with any current Futaba PCM1024 receiver.
The number of channels on the receiver can be more than on the transmitter - the extra channels above ch6 will just be unused.
You can only use a Futaba receiver for PCM - brands are not interchangeable.
The 127DF is an FM receiver, has been replaced with the 168DF.
The number of channels on the receiver can be more than on the transmitter - the extra channels above ch6 will just be unused.
You can only use a Futaba receiver for PCM - brands are not interchangeable.
The 127DF is an FM receiver, has been replaced with the 168DF.