Who Sells Aluminum Servo Arms for Hitec Servos?
#1
Senior Member
Thread Starter
My Feedback: (7)
Join Date: Mar 2002
Location: Wharton,
NJ
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
Who Sells Aluminum Servo Arms for Hitec Servos?
Who sells Aluminum Servo arms fir Hitecs? I know H9 makes them for JR/AIR servos but I’m not sure if they are compatible. I need 2 sort single arms (tail mounted servos) and 2 long single arms (ailerons).
Thanks
Thanks
#3
Senior Member
Thread Starter
My Feedback: (7)
Join Date: Mar 2002
Location: Wharton,
NJ
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
Who Sells Aluminum Servo Arms for Hitec Servos?
Cool site jack, but I'm looking for conventional servo arms in Alum. This is for a .60 size plane not a 1/4 scaler.
The Search goes on!!!
The Search goes on!!!
#4
Who Sells Aluminum Servo Arms for Hitec Servos?
Nick;
No Problem I've used the smaller ones on 60 size and 40 size. I've taken U/Control Bellcranks and used then for Pull Pull's. You just need to be creative.
No Problem I've used the smaller ones on 60 size and 40 size. I've taken U/Control Bellcranks and used then for Pull Pull's. You just need to be creative.
#6
Senior Member
Thread Starter
My Feedback: (7)
Join Date: Mar 2002
Location: Wharton,
NJ
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
Who Sells Aluminum Servo Arms for Hitec Servos?
ok I got the scoop:
Hitec Part# 55701 (single sided)
Hitec Part# 55702 (double sided)
See what the 55701 looks like on tower's site:
http://www2.towerhobbies.com/cgi-bin...1&I=LXUZ81&P=7
Just put an order in with my LHS, life is good.
Hitec Part# 55701 (single sided)
Hitec Part# 55702 (double sided)
See what the 55701 looks like on tower's site:
http://www2.towerhobbies.com/cgi-bin...1&I=LXUZ81&P=7
Just put an order in with my LHS, life is good.