where can I get connectors for hitec a narrow band receiver
07-26-2003, 10:39 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2002
Location: barnesville,
OH
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
where can I get connectors for hitec a narrow band receiver
I have a hitec ultra narrow band receiver. The plug area seems to be considerably smaller than the standard
hitec or futaba j type plug.
appreciate any info, dave
hitec or futaba j type plug.
appreciate any info, dave
07-27-2003, 01:36 PM
#2
Senior Member
My Feedback: (1)
Join Date: Feb 2003
Location: Payson,
AZ
Posts: 2,141
Likes: 0
Received 0 Likes
on
0 Posts
where can I get connectors for hitec a narrow band receiver
Hitec's service is now supposed to be handled by Earnest Pritchard, 1005 N. Aviator Pkwy, Payson, AZ 85541.
His phone is (928) 474-2528. I use some Hitec and some Futaba and have never had any problems except to shave off the bit of Futaba that protrudes from the forward edge of the plug. I also use the Hitec 555 RX that goes with the Focus 3FM. The HS55 servos seem to have smaller plugs. Perhaps those are the plugs you are referring to.
His phone is (928) 474-2528. I use some Hitec and some Futaba and have never had any problems except to shave off the bit of Futaba that protrudes from the forward edge of the plug. I also use the Hitec 555 RX that goes with the Focus 3FM. The HS55 servos seem to have smaller plugs. Perhaps those are the plugs you are referring to.
