RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   RC Radios, Transmitters, Receivers, Servos, gyros (http://www.rcuniverse.com/forum/rc-radios-transmitters-receivers-servos-gyros-157/)
-   -   JR X9503 programming (http://www.rcuniverse.com/forum/rc-radios-transmitters-receivers-servos-gyros-157/11243027-jr-x9503-programming.html)

y2k6vette 09-27-2012 01:25 PM

JR X9503 programming
 
Has anybody programmed this radio for thrust vectoring in an SU-37 plane designed by Steve Schumate....kit sold by 6mmflyrc.

This is a great looking plane and flies like a homesick angel....but it requires a lot of programming for the control surfaces as well as the motors.

Any help would be greatly appreciated,

Steve

BuschBarber 09-27-2012 02:06 PM

RE: JR X9503 programming
 

Quote:

ORIGINAL: y2k6vette

Has anybody programmed this radio for thrust vectoring in an SU-37 plane designed by Steve Schumate....kit sold by 6mmflyrc.

This is a great looking plane and flies like a homesick angel....but it requires a lot of programming for the control surfaces as well as the motors.

Any help would be greatly appreciated,

Steve
I have a fellow club member who programmed a 9503 for the Red/White/Blue Mig29. As I recall, he needed 7 Programmable Mixers but only had 6 available to him. I believe it is ready to fly but has not, as yet.

y2k6vette 09-28-2012 06:44 AM

RE: JR X9503 programming
 
Thanks....if your friend gets it flying I would appreciate hearing from him on his programming technique.

Steve

BuschBarber 09-28-2012 06:48 AM

RE: JR X9503 programming
 

Quote:

ORIGINAL: y2k6vette

Thanks....if your friend gets it flying I would appreciate hearing from him on his programming technique.

Steve
I will point him to this thread and see if he wants to respond.

y2k6vette 09-29-2012 06:10 AM

RE: JR X9503 programming
 
Thanks for your help....it's appreciated for sure.

Steve


All times are GMT -8. The time now is 02:48 PM.