RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   RC Radios, Transmitters, Receivers, Servos, gyros (http://www.rcuniverse.com/forum/rc-radios-transmitters-receivers-servos-gyros-157/)
-   -   Need a little help with a Hp6DSM (http://www.rcuniverse.com/forum/rc-radios-transmitters-receivers-servos-gyros-157/11378791-need-little-help-hp6dsm.html)

Zlash03 01-21-2013 12:20 PM

Need a little help with a Hp6DSM
 
A few days ago I got myself one of those Blade 6 channel transmitters in an attempt to cut down on controllers but I'm having problems with my MQx. I'm new to ths kind of radio so bare with me. I've got it trimmed out so 0%-50% throttle makes it hover really nice. But as soon as I go past 50% throttle it starts violently careening in reverse and off to the left. I tried twisting the 5th channel knob and the other knob in all different configurations but it just won't stay straight. Any help?

chuckk2 01-21-2013 09:16 PM

RE: Need a little help with a Hp6DSM
 
I might guess that the motors are not equal in power for some reason. Check how freely the propellers rotate, and see if there is any even minor binding.
I had to replace the propeller shaft bearings in a new out of box quad MQX due to something causing drag in one of the bearings.


Zlash03 01-22-2013 01:06 PM

RE: Need a little help with a Hp6DSM
 
They all seem to spin fine. I think it's a binding or gyro stabilization issues because now it only does that sometimes and if I unplug the mqx and do it all over again it's fine.


All times are GMT -8. The time now is 06:11 PM.