Multiplex 9 channel synth Rx has arrived.
Well "all things come to he who waits" and my Synth Rx has arrived. Very interesting it is too. As well as obviously having the ability to seek the strongest signal, lock onto it and confirm it as correct, it has a number of other interesting facilities. Firstly it is an IPD Rx but you can turn the filter off temporarily to do the range tests, then when satisfied turn it on again. Like the previous 12 channel IPD recievers you can plug 2, 5 cell batteries in and it will monitor the performance of each, and keep each working at its optimum.
Even more interesting is that it provides an error counter (low voltage, interference, and low field strength), and that at switch on if the voltage is below 4.4v it spits its teddy out and won't play any more until the voltage is raised above 4.8v. This is a potential model saver! Hey and after all that it works as a receiver too!. Totally free of drama as expected. Changing the frequency is quick, easy and totally foolproof. I just need a extension programming switch now as this Rx is ideal for models where the Rx is buried. |
RE: Multiplex 9 channel synth Rx has arrived.
John, how does the error counter give you the info - blinking led? Does it tell you how many of each type of error or just the total of all errors?
H |
RE: Multiplex 9 channel synth Rx has arrived.
Errr... I'll have to read that bit again. I think its just a total of all errors but there is some info about what the blinking LED means.
|
RE: Multiplex 9 channel synth Rx has arrived.
I have a RX-12 Synth DS IPD!
From Operating Instructions: """ The receiver features three internal error counters for the following errors: Low voltage. Recepcion blind spots (severe field strength fluctuations) Signal interference The LED displays the sum of the errors in the three error counter as soon as the error is detected: LED Code 6 --------------- - 1-9 erros LED Code 7 ------------- - - 10-29 errors LED Code 8 ----------- - - - >30 errors """ Miquel Rigo. |
RE: Multiplex 9 channel synth Rx has arrived.
Those who are interested can download the instruction manual here:
[link=http://www.multiplex-rc.de/cms/vorschau/upload/d_anleitungen/rx_9_12_syn.pdf]http://www.multiplex-rc.de/cms/vorschau/upload/d_anleitungen/rx_9_12_syn.pdf[/link] |
RE: Multiplex 9 channel synth Rx has arrived.
ORIGINAL: JohnMac and that at switch on if the voltage is below 4.4v it spits its teddy out and won't play any more until the voltage is raised above 4.8v. This is a potential model saver! |
RE: Multiplex 9 channel synth Rx has arrived.
ORIGINAL: rorywquin ORIGINAL: JohnMac and that at switch on if the voltage is below 4.4v it spits its teddy out and won't play any more until the voltage is raised above 4.8v. This is a potential model saver! John. |
All times are GMT -8. The time now is 02:53 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.