Offical nitro tc3 thread
#126
Join Date: Oct 2004
Location: Forth Smith, AR
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
LRP Electronics jumped into the Nitro engine field early this year (late last year?) and AE is offering some of the engines on their site. I haven't looked to see which ones they offer as LRP has a "club racer" .12 and a Team "racing" engine as well as .15, .18, .21 and .28. There's even a .16. Which I've never seen before.
I've not really seen anyone comment on the engines good or bad so far. They've seen some touring car action in Europe.
For the price I'd stick to a known commodity of the racer breed engine. You can get proven performers at the $180-200 range.
I've not really seen anyone comment on the engines good or bad so far. They've seen some touring car action in Europe.
For the price I'd stick to a known commodity of the racer breed engine. You can get proven performers at the $180-200 range.
#127
RE: Offical nitro tc3 thread
ORIGINAL: zxknight
i have not seen that engine before, do you have any specs on it?
i have not seen that engine before, do you have any specs on it?
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXKYU6&P=0]Associated LRP Z.12R Team Engine[/link]
#128
Senior Member
Join Date: Sep 2004
Location: Woodhaven ,
MI
Posts: 2,108
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
What magazine did that TC3 RTR vs the TC3 Factory Team? I know it was a close one, but I also know I already threw it away Is it available online?
#130
Senior Member
My Feedback: (1)
Join Date: Oct 2002
Location: CULIACAN, SINALOA, MEXICO
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
whats up guys i am new here i just bought a ntc3 used with novarossi 12s engine i need to know if anybody know the facctory needle setting for this engine.?
does anybody knows of a forum that has a ntc3 forum i know this is the official nitro tc3 page but it really is hard to search for something is there a ntc3 forum>?
why AE doent have one we all should drop them an email and let them know that theres alot of ntc3 users and that we need a place where we can share information with other users.
is making a web page and forum really that hard.?
has anybody made a webpage we need someone to make a forum for ntc3s only or in categories like ntc3s, 4tecs, ect individual page for each one.
does anybody knows of a forum that has a ntc3 forum i know this is the official nitro tc3 page but it really is hard to search for something is there a ntc3 forum>?
why AE doent have one we all should drop them an email and let them know that theres alot of ntc3 users and that we need a place where we can share information with other users.
is making a web page and forum really that hard.?
has anybody made a webpage we need someone to make a forum for ntc3s only or in categories like ntc3s, 4tecs, ect individual page for each one.
#131
Junior Member
Join Date: Nov 2004
Location: St-Jerome,
QC, CANADA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
The best forum I know for NTC3 is on RCTECH.NET at
[link=http://www.rctech.net/forum/showthread.php?t=232]http://www.rctech.net/forum/showthread.php?t=232[/link]
CrazyRonny
[link=http://www.rctech.net/forum/showthread.php?t=232]http://www.rctech.net/forum/showthread.php?t=232[/link]
CrazyRonny
#132
Senior Member
Join Date: Aug 2004
Location: Danville,
PA
Posts: 1,424
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
I have an all titanium, hardcore ntc3. Man is that thing a rocket hard to control. I put it through it's paces on a dirt oval with a late model wedge body. It needs a better engine it still has the AE .12 in it. Anyone else dirtrack their ntc3?
#134
Member
Join Date: Aug 2005
Location: Valley Cottage,
NY
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
hey yall i love nitro tc3's and i specialy love min but im tired of bashing i wanna race
i live in ny and theres not alot of tracks (no onroad that i know of) and i want to race my tc3 so for those who live in ny were do you race/bash?
i live in ny and theres not alot of tracks (no onroad that i know of) and i want to race my tc3 so for those who live in ny were do you race/bash?
#136
Senior Member
My Feedback: (1)
Join Date: Oct 2002
Location: CULIACAN, SINALOA, MEXICO
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
is there a fix for the steering when i move one of the front tires i see
alot of slop in the turnbucles the whole thing just rock to the sides all the way ot the servo arm.?
would this make the car more uncontrolable at high speeds.?
alot of slop in the turnbucles the whole thing just rock to the sides all the way ot the servo arm.?
would this make the car more uncontrolable at high speeds.?
#137
Join Date: Oct 2004
Location: Forth Smith, AR
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
Grab your wheel and try to wiggle it. If that is where you are saying the slop is you need to put new bearings in the wheel.
If you truely mean the turnbuckles I'll need further explaination.
If you truely mean the turnbuckles I'll need further explaination.
#138
Junior Member
Join Date: Feb 2004
Location: florida,
FL
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
hi I'm looking to buy a nitro tc3. it comes unbuilt but has a lot of titanium/aluminum parts.[sm=thumbdown.gif][sm=thumbup.gif]
Hardcore Racing Titanium chassis Hardcore Racing Titanium upper chassis A set of Take-Off slicks O.S. CV-R .12 pull start with exh. manifold. Motor saver air filter Eight aluminum a-arms Four aluminum steering knuckles . Two aluminum diff. Hardcore Racing titanium/aluminum front body mount Hardcore Racing titanium/aluminum front shock mount Hardcore Racing titanium/aluminum rear body mount Complete stainless steel screw kit Four Lunsford Racing titanium turnbuckles Lightweight clutch with 22/26 tooth gears Two spare drive lines Carbon fiber side chassis brace
thanks
also does anyone no any good places to get a manual for bulding this car??[sm=confused.gif]
Hardcore Racing Titanium chassis Hardcore Racing Titanium upper chassis A set of Take-Off slicks O.S. CV-R .12 pull start with exh. manifold. Motor saver air filter Eight aluminum a-arms Four aluminum steering knuckles . Two aluminum diff. Hardcore Racing titanium/aluminum front body mount Hardcore Racing titanium/aluminum front shock mount Hardcore Racing titanium/aluminum rear body mount Complete stainless steel screw kit Four Lunsford Racing titanium turnbuckles Lightweight clutch with 22/26 tooth gears Two spare drive lines Carbon fiber side chassis brace
thanks
also does anyone no any good places to get a manual for bulding this car??[sm=confused.gif]
#139
Senior Member
My Feedback: (1)
Join Date: Oct 2002
Location: CULIACAN, SINALOA, MEXICO
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
guys check this out i made a forum specially for the ntc3 give it a try go here
http://pub46.bravenet.com/forum/3904273306]
let everyone know about this place
http://pub46.bravenet.com/forum/3904273306]
let everyone know about this place
#140
Senior Member
Thread Starter
Join Date: Apr 2005
Location: glenwood,
IL
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
natone try ebay for the manual or just go on associated web site thats a pretty tricked out car but have u learned how to drive nitro cars b/c that aluminum will bend if u have an accident aluminum and titanium are not for newbies but other than that good deal how much is it going to cost u
#141
Junior Member
Join Date: Feb 2004
Location: florida,
FL
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
ive driven electric for about a year
so im not really newby i will crash but i live in the middle of nowere and we have no curbs
about $200
so im not really newby i will crash but i live in the middle of nowere and we have no curbs
about $200
#143
Senior Member
Join Date: Jul 2005
Location: wildomar, CA
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
o, i have the 5th post in this thread, i feel special. lol, i dont even hop up my ntc3 any more. all it needed was some servos and a of couse a 0s 18 cvr
#144
Senior Member
Thread Starter
Join Date: Apr 2005
Location: glenwood,
IL
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
I love my ntc3 i have:
Carbon fiber main chasssis
aluminum hub carriers
aluminum and carbon fiber shock towers
rpm bumpers
solid axle in rear and front
aluminum diff cases
venom fail safe
venom battery monitor
titanium turnbuckles
carbon upgrade kit
brake bearings
o.s. .18 cvr
mx3 fm radio
mip cvd's
aluminum input cup
factory tuned tuned pipe Black
Blue header
aluminum rear arm bulk head
aluminum front arm bulk head
jaco nitro shoes
and a 2.1 stratus body
I think that is it but i have a few more things to get then the tc3 will be a straight killa at the strip.
Carbon fiber main chasssis
aluminum hub carriers
aluminum and carbon fiber shock towers
rpm bumpers
solid axle in rear and front
aluminum diff cases
venom fail safe
venom battery monitor
titanium turnbuckles
carbon upgrade kit
brake bearings
o.s. .18 cvr
mx3 fm radio
mip cvd's
aluminum input cup
factory tuned tuned pipe Black
Blue header
aluminum rear arm bulk head
aluminum front arm bulk head
jaco nitro shoes
and a 2.1 stratus body
I think that is it but i have a few more things to get then the tc3 will be a straight killa at the strip.
#145
Senior Member
Join Date: Sep 2004
Location: Woodhaven ,
MI
Posts: 2,108
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
Getting a lot of chassis vibration, and air in the fuel lines because of it (near the end of the tank) any solves out there? Tank is air tite, and rubber O rings are cushioning the tank as well.
#148
Junior Member
My Feedback: (1)
Join Date: Aug 2005
Location: WOODRIDGE, IL
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
hey proud TC3 owners - from what i read here - this car is woth its money. I kind of quit helicopters- too expensive and eats alot of fuel too ( 90)" anyways i always like cars and i think im going to buy TC3 RTR PLUS
Question #1 - how is the engine that comes with the car?
#2- can i upgrade it to O.S 15CV-X w/Recoil?
#3- its good for me as to begginer- what if i decide to move up- what r its upgrading capabilities?
#4- Speed - if more than 40 Mph then ok
Question #1 - how is the engine that comes with the car?
#2- can i upgrade it to O.S 15CV-X w/Recoil?
#3- its good for me as to begginer- what if i decide to move up- what r its upgrading capabilities?
#4- Speed - if more than 40 Mph then ok
#149
Senior Member
My Feedback: (1)
Join Date: Oct 2002
Location: CULIACAN, SINALOA, MEXICO
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
hey julius i also quit helis i had the raptor 70 i just sold it like 3 weeks ago and jump into cars they are cheaper and fun to drive i have the ntc3 i just got it like 2 weeks ago i got it used it came with a novarossi 12s engine pretty fast even though i havent use it at the track tomorrow might be that day i also bought a brand new savage 4.6 ss
#150
Senior Member
Join Date: Sep 2004
Location: Woodhaven ,
MI
Posts: 2,108
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offical nitro tc3 thread
Engine that comes with the car is OK for a RTR. The .15 CV will fit, but Id look at the CV-R for more power and speed. I just got mine as well, but I been into cars for quite some time. Hitting 40 stock is easy, according to RC Nitro (Oct 2004) Out of the box the plus will do 45 stock, and 47 with the carb restrictor out. I was un-impressed with the acceleration with the restrictor in but top end was good. Still need to test and re-tune with it out though. Im dropping a .18TM out of my Revo in the car in the spring That should give more power than I know what to do with. If you want insane power, look at the .12TZ from OS. As far as upgrades go, possibilities are endless. You can upgrade every part on the car to something better (carbon parts, thicker aluminum chassis, threaded aluminum shocks, wheels, tires etc. And theres 1,000s of bodys out there so if you have a dream car, you can drive it for once!