Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
05-27-2009, 12:45 PM
#1253
Senior Member
RE: Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
ORIGINAL: Brent Davis
well here's a proto-type custom built crankshaft that Rick of RBmods built for one of my 2.5R drag race engines. We will take this data and make a crankshaft for my Xenon and Kangaroo engines. The neat thing is that Rick is able to custom time the engine crank timing via crank pin location. Rick is now porting this same crank and will add the putty and send it to me later next week for some testing. Gotta love an engine modifier that can MAKE parts. These cranks will also come with a longer shaft so that the Traxxas engines can use the Centex clutches and the clutch nut will be a standard .21 nut so that you can also use a 3 shoe clutch/nut if you want to.
well here's a proto-type custom built crankshaft that Rick of RBmods built for one of my 2.5R drag race engines. We will take this data and make a crankshaft for my Xenon and Kangaroo engines. The neat thing is that Rick is able to custom time the engine crank timing via crank pin location. Rick is now porting this same crank and will add the putty and send it to me later next week for some testing. Gotta love an engine modifier that can MAKE parts. These cranks will also come with a longer shaft so that the Traxxas engines can use the Centex clutches and the clutch nut will be a standard .21 nut so that you can also use a 3 shoe clutch/nut if you want to.
That is very impressive...... could lead to making stroker kits for these engines..... !!!!
05-27-2009, 04:28 PM
#1254
Senior Member
Thread Starter
Join Date: Jun 2007
Location: Waldorf, MD
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
RE: Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
ORIGINAL: supertib
That is very impressive...... could lead to making stroker kits for these engines..... !!!!
That is very impressive...... could lead to making stroker kits for these engines..... !!!!
05-31-2009, 09:21 AM
#1255
Senior Member
Join Date: May 2008
Location: Longueuil, QC, CANADA
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
RE: Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
Crank look great, good luck with it Brent!
Just to let people know, if anyone is interrested my Big block CD3 is on ebay, it have a modified Picco .21 P9R in it.
We cant run our nitro onroad anymore at the place we ran normaly, someone called the police, i would need to travel to much to find a place worthing driving it....
Those who seen it know it runs great, if anyone interrersted heres the link
http://cgi.ebay.ca/Ofna-CD3-1-10-onr...3A1%7C294%3A50
sorry for hijacking...again.. lol
Anybody got new stuff to show? seem like the thread have slow down a little?
Nitrohead5300 hows it going? got anything new man?
05-31-2009, 03:25 PM
#1256
Join Date: Jul 2003
Location: indpls, IN
Posts: 3,140
Likes: 0
Received 0 Likes
on
0 Posts
RE: Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
ORIGINAL: Over_revO
Crank look great, good luck with it Brent!
Just to let people know, if anyone is interrested my Big block CD3 is on ebay, it have a modified Picco .21 P9R in it.
We cant run our nitro onroad anymore at the place we ran normaly, someone called the police, i would need to travel to much to find a place worthing driving it....
Those who seen it know it runs great, if anyone interrersted heres the link
http://cgi.ebay.ca/Ofna-CD3-1-10-onr...3A1%7C294%3A50
sorry for hijacking...again.. lol
Anybody got new stuff to show? seem like the thread have slow down a little?
Nitrohead5300 hows it going? got anything new man?
Crank look great, good luck with it Brent!
Just to let people know, if anyone is interrested my Big block CD3 is on ebay, it have a modified Picco .21 P9R in it.
We cant run our nitro onroad anymore at the place we ran normaly, someone called the police, i would need to travel to much to find a place worthing driving it....
Those who seen it know it runs great, if anyone interrersted heres the link
http://cgi.ebay.ca/Ofna-CD3-1-10-onr...3A1%7C294%3A50
sorry for hijacking...again.. lol
Anybody got new stuff to show? seem like the thread have slow down a little?
Nitrohead5300 hows it going? got anything new man?
Sorry that you lost your running site.
06-01-2009, 06:38 AM
#1257
Senior Member
Thread Starter
Join Date: Jun 2007
Location: Waldorf, MD
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
RE: Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
Damn Over_revo. Man if you lived here, there are TONS of places to run on-roads and in fact the cops encourage such things to help keep kids and others from doing other stupid things. Heck we've even got a few cops that are into on-road cars now and come out to play. Your people suck ballz for calling the cops to make you stop.........geez. Heck I've seen an EMPTY freakin' parking lot in those videos so what is the hell the problem? It isn't like you were putting anyone in harms way.
Anyways, I've been making some changes to my Pro-Mod car at the moment. I didn't run it this weekend but I did go to the race and hang out with my MD. gang. Here's a video of our final.
http://www.youtube.com/watch?v=bW0KmP7CgZ0
Here's Greg crashing.
http://www.youtube.com/watch?v=II0qsx1sO6g
Here's a good side by side race.
http://www.youtube.com/watch?v=WWZBMbMrcf0
Greg going straight down broadway
http://www.youtube.com/watch?v=j51GpEMrI6o
06-01-2009, 04:35 PM
#1260
Senior Member
Join Date: May 2008
Location: Longueuil, QC, CANADA
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
RE: Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
Yeah Brent , its empty! in that parking lot the security guy said it was private and needed to go somewhere else, and in the long street in an industrial place (closest house is about close to a 1/4 mile..) theres that guy who called the cop....
Im really bored to have to find places, closest i found that is decent is at 35 minutes from my house....
Nice vids by the way!!
06-01-2009, 07:51 PM
#1262
Senior Member
Thread Starter
Join Date: Jun 2007
Location: Waldorf, MD
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
RE: Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
ORIGINAL: bigwill5686
Hey brent, you going to the capital classic this weekend?
Hey brent, you going to the capital classic this weekend?
RoudyRS4, you can buy parts for the Ofna CD3 all day from nitrohouse.com They are very well stocked brutha.
Over, I hear you man and sorry that you cannot keep such a good running car at that. That sucks.
06-02-2009, 07:48 AM
#1263
Senior Member
Thread Starter
Join Date: Jun 2007
Location: Waldorf, MD
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
RE: Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
well this is a bit off topic but I have been working on a 2.5R Traxxas engine that Rick of RBmods has been busting his butt off for me to get this thing to run competively. Rick has built me a custom billet aluminum piston, new crankshaft and rod. The engine also has his new head that uses a turbo plug button as well and THAT made a huge difference coming from the stock head design. The only thing that is left that is Traxxas is the block and sleeve. Heck Rick has even said that he is thinking aout making me an aluminum 5 port sleeve for this 2.5R next. I should be able to test it out this weekend. My steering servo has been sticking and I don't want to put the car into a wall because of that.
Here's a pic of the engine on one of my many CD3's.
Here's a stock 2.5R to the drag modded 2.5R without fins on it up to and the new RBmods head.
06-02-2009, 08:46 AM
#1265
Senior Member
Thread Starter
Join Date: Jun 2007
Location: Waldorf, MD
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
RE: Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
ORIGINAL: ziggy12345
This is a bit more off topic
This is a bit more off topic
06-02-2009, 04:13 PM
#1268
Senior Member
Join Date: Jun 2003
Location: UK
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
RE: Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
Monday 8th June. I dont have a shell yet so its going to run as is. I will only go for a short burn and small injector to reduce the thrust. If that works I'll work my way up
Cheers
Cheers
06-02-2009, 04:50 PM
#1269
Senior Member
Join Date: Nov 2007
Location: joppa, MD
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
RE: Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
06-02-2009, 05:34 PM
#1270
Senior Member
Thread Starter
Join Date: Jun 2007
Location: Waldorf, MD
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
RE: Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
ORIGINAL: bigwill5686
This is the capital classic
http://www.rctech.net/forum/nitro-ro...une-3-7-a.html
This is the capital classic
http://www.rctech.net/forum/nitro-ro...une-3-7-a.html
06-02-2009, 06:06 PM
#1271
Join Date: Jul 2003
Location: indpls, IN
Posts: 3,140
Likes: 0
Received 0 Likes
on
0 Posts
RE: Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
ORIGINAL: ziggy12345
Monday 8th June. I dont have a shell yet so its going to run as is. I will only go for a short burn and small injector to reduce the thrust. If that works I'll work my way up
Cheers
Monday 8th June. I dont have a shell yet so its going to run as is. I will only go for a short burn and small injector to reduce the thrust. If that works I'll work my way up
Cheers
Oh yeah thanks for telling me about Reed tires and RC Market. I just placed my order the other day and the tires are here already!! Nice quality !!
06-03-2009, 12:51 PM
#1272
Senior Member
Join Date: Jun 2003
Location: UK
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
RE: Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
This is ready for testing monday as well
The body was my first attempt at fibreglass molding and it wasnt too bad. The shape is all wrong and the finish is not so hot but it will do for a start
Cheers
The body was my first attempt at fibreglass molding and it wasnt too bad. The shape is all wrong and the finish is not so hot but it will do for a start
Cheers
06-03-2009, 06:28 PM
#1275
Senior Member
Thread Starter
Join Date: Jun 2007
Location: Waldorf, MD
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
RE: Nasty 1/10 scale on-road cars using .21 or larger engines....come inside
ORIGINAL: bigwill5686
This is the capital classic
http://www.rctech.net/forum/nitro-ro...une-3-7-a.html
This is the capital classic
http://www.rctech.net/forum/nitro-ro...une-3-7-a.html
Looking good Ziggy and good luckat the races.