RC4WD trailfinder2 Blazer V8
#1
Thread Starter
RC4WD trailfinder2 Blazer V8
Finally it arrived !!!
What an illusion to see the box:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
And I start to take out, first a pair of jellies for the V8, some pulleys and the ignition, they did not have more sweets in stock ...
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Nothing else open, a little screw to the ground, we'll see if it is missing somewhere or it comes from more:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Wet does not come hehe :
by https://www.flickr.com/photos/126459290@N04/, en Flickr
The bags with details and paraphernalia vary :
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Another bag with wall and battery charger NIMH:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
And the transmiter , which comes prepared with the third channel for winch:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
I take it out of the box, well protected comes for the compact that is the box and what it includes. First impression, and although I had seen the body live more times, not so the v8 and the r4, but more beautiful live than in the truth photo, used to buy cars, the truth that has surprised me pleasantly:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
The wheels, precious the truth, the screws and elacabado with the front locks:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
And the backs the different cap:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
And what I most expected to see, the V8 with the R4 and the double front shock absorber, quality finishes and detail, impressed me I'm really jejeje, win live:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
For the time being it's everything, it's a workshop, first to change the yota1 for some yota2 with ballistic caps and change wheels hehehe, then more things that I'll tell you.
What an illusion to see the box:
And I start to take out, first a pair of jellies for the V8, some pulleys and the ignition, they did not have more sweets in stock ...
Nothing else open, a little screw to the ground, we'll see if it is missing somewhere or it comes from more:
Wet does not come hehe :
The bags with details and paraphernalia vary :
Another bag with wall and battery charger NIMH:
And the transmiter , which comes prepared with the third channel for winch:
I take it out of the box, well protected comes for the compact that is the box and what it includes. First impression, and although I had seen the body live more times, not so the v8 and the r4, but more beautiful live than in the truth photo, used to buy cars, the truth that has surprised me pleasantly:
The wheels, precious the truth, the screws and elacabado with the front locks:
And the backs the different cap:
And what I most expected to see, the V8 with the R4 and the double front shock absorber, quality finishes and detail, impressed me I'm really jejeje, win live:
For the time being it's everything, it's a workshop, first to change the yota1 for some yota2 with ballistic caps and change wheels hehehe, then more things that I'll tell you.
#2
Thread Starter
Originally Posted by FREEDOM83
Nothing else open, a little screw to the ground, we'll see if it is missing somewhere or it comes from more:
Sin título by alberto espinosa, en Flickr
#3
Thread Starter
Test the wheels:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
And the axes that will lead to the wait:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
And the axes that will lead to the wait:
#4
Thread Starter
- I changed the fuel tank for one of alu in red from RC4WD:
I have advanced the servo to be able to decorate the motor hole with the RC4WD pulleys and ornaments:
I have mounted the Yota2 of RC4WD with the ballistic diff covers of RC4WD, more elegant and with the direction behind the axle . I had thought of another system with forwarding but like that is enough. I have also removed the smaller leaf spring in front and back, I have mounted soft springs in rear shock that include them as OEM and in the front suspension I have left one of the shock absorbers on each side without a spring. It is softer and it twists easier, it has won a lot:
Another detail that I had kept at home, the RC4WD hub nuts Mikey Thomson:
The following users liked this post:
DrFeelGood (10-19-2020)
#5
Thread Starter
A few more things, I needed urgent help and take the opportunity to ask for the bull bar:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Some pictures more hehehe
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Some pictures more hehehe
#7
Thread Starter
Thanks !!
Truck Dimensions
Wheelbase: 200mm (7.8")
Width: 503mm (19.8")
Height: 237mm (9.3")
Ground Clearance: 62mm (2.4")
Final Drive Ratio: 31.9:1
Weight: 8.44Lbs/3.83Kg
https://store.rc4wd.com/RC4WD-Trail-...on_p_5694.html
Truck Dimensions
Wheelbase: 200mm (7.8")
Width: 503mm (19.8")
Height: 237mm (9.3")
Ground Clearance: 62mm (2.4")
Final Drive Ratio: 31.9:1
Weight: 8.44Lbs/3.83Kg
https://store.rc4wd.com/RC4WD-Trail-...on_p_5694.html
The following users liked this post:
DrFeelGood (10-19-2020)
#8
Wow that thing is a beast . a week ago I ordered a TFL Bronco ,you messed me up after posting that truck , now I have to get one too LOL. Is yours the limited edition RTR truck or was it a kit . cheers Roger .
#9
Thread Starter
https://store.rc4wd.com/RC4WD-Trail-...on_p_5694.html
Last edited by FREEDOM83; 03-27-2018 at 10:30 PM. Reason: error
#12
Thread Starter
After a long time, I will assemble the accessories
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Radiator , distributor , water pump , pulley kit , thermostat , exhaust headers ...
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
1 of the 4 radiator clamps was broken so it only takes 3
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
And after assembling everything, without instructions of anything, following the photos of the web of rc4wd, when mounting the body, the wall in front of the dashboard makes butt with the distributor and can not be mounted without cutting the body
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
And bull bar :
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Radiator , distributor , water pump , pulley kit , thermostat , exhaust headers ...
1 of the 4 radiator clamps was broken so it only takes 3
And after assembling everything, without instructions of anything, following the photos of the web of rc4wd, when mounting the body, the wall in front of the dashboard makes butt with the distributor and can not be mounted without cutting the body
And bull bar :
#13
Thread Starter
Good morning for saying something .....
Yesterday, after two years, and as I am adding in the thread, I continue with the Blazer putting it aimed. Yesterday I had to improve the body anchoring system, but I was surprised and of course for bad as expected with this brand ....
First came the broken body, they sent a second body, but this second has one of the anchors to the body with the biggest hole due to which you can't use that hole.
Conclusions on the rc4wd brand: poor quality of finishes, but very very bad. Half products come from China with the corresponding quality and without revision. In their day with the axes, they came without adjusting and nobody said anything, everyone broke, until after complaints and complaints they took out a set of adjustment washers. People have seen how their tires are worth nothing more than their tires or if they are not problems (something they like seems to be). Then with a Beast2 6x6, there were missing screws, past threads etc. Now with the Blazer, more than 900e of model to bring loose or missing screws, the broken body and then car finishes of € 150, the tranny comes dirty as if it was already used, the body with a larger hole of the account which denotes the capacity of the brand quality section .... are things that you do not expect from one of the first brands in the hobby market, anything injora brings better quality than things of this brand.
Advice if you buy anything of this brand, check it millimeter by millimeter and you will avoid problems, although it is better not to have problems or garbage of products at home to avoid buying rc4wd cars, any other brand makes a thousand laps in quality and functioning.
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Yesterday, after two years, and as I am adding in the thread, I continue with the Blazer putting it aimed. Yesterday I had to improve the body anchoring system, but I was surprised and of course for bad as expected with this brand ....
First came the broken body, they sent a second body, but this second has one of the anchors to the body with the biggest hole due to which you can't use that hole.
Conclusions on the rc4wd brand: poor quality of finishes, but very very bad. Half products come from China with the corresponding quality and without revision. In their day with the axes, they came without adjusting and nobody said anything, everyone broke, until after complaints and complaints they took out a set of adjustment washers. People have seen how their tires are worth nothing more than their tires or if they are not problems (something they like seems to be). Then with a Beast2 6x6, there were missing screws, past threads etc. Now with the Blazer, more than 900e of model to bring loose or missing screws, the broken body and then car finishes of € 150, the tranny comes dirty as if it was already used, the body with a larger hole of the account which denotes the capacity of the brand quality section .... are things that you do not expect from one of the first brands in the hobby market, anything injora brings better quality than things of this brand.
Advice if you buy anything of this brand, check it millimeter by millimeter and you will avoid problems, although it is better not to have problems or garbage of products at home to avoid buying rc4wd cars, any other brand makes a thousand laps in quality and functioning.
The following users liked this post:
FREEDOM83 (01-22-2020)
#15
Thread Starter
Things are still coming, and more that will come, after a fight via mail with the RC4WD after-sales service, in the end they make me an account on their website for future orders in their online store, just as I said The bad, I say the good, excellent after-sales service the truth, at the moment, with more fight or less, every problem has done something to solve it, so I can be happy that almost 2 years later, they have had a commercial attention and it is Very much appreciated.
Some gummies that will be for another but they arrived:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
And the rear leaf brackets, to prevent it from snagging:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Some gummies that will be for another but they arrived:
And the rear leaf brackets, to prevent it from snagging:
#16
Thread Starter
More work, I changed the electronics, a servo from 38kg to 6v with the hobbywing 1080 ESC. Motor I have left the same to see that. I have put more elegant covers to the cables in the part that is seen under the hood. With this configuration everything has entered the aluminum tank and I have been able to remove the tray from the middle.
[url = https: //flic.kr/p/2ikxZsx] [img] [/ img] [/ url] [url = https: // flic. kr / p / 2ikxZsx] 1 [/ url] by [url = https: //www.flickr.com/photos/126459290@N04/] alberto espinosa [/ url], on Flickr
[url = https: //flic.kr/p/2ikBB5s] [img] [/ img] [/ url] [url = https: // flic. kr / p / 2ikBB5s] 2 [/ url] by [url = https: //www.flickr.com/photos/126459290@N04/] alberto espinosa [/ url], on Flickr
[url = https: //flic.kr/p/2ikxZtK] [img] [/ img] [/ url] [url = https: // flic. kr / p / 2ikxZtK] 3 [/ url] by [url = https: //www.flickr.com/photos/126459290@N04/] alberto espinosa [/ url], on Flickr
[url = https: //flic.kr/p/2ikBB6j] [img] [/ img] [/ url] [url = https: // flic. kr / p / 2ikBB6j] 4 [/ url] by [url = https: //www.flickr.com/photos/126459290@N04/] alberto espinosa [/ url], on Flickr
[url = https: //flic.kr/p/2ikxZsx] [img] [/ img] [/ url] [url = https: // flic. kr / p / 2ikxZsx] 1 [/ url] by [url = https: //www.flickr.com/photos/126459290@N04/] alberto espinosa [/ url], on Flickr
[url = https: //flic.kr/p/2ikBB5s] [img] [/ img] [/ url] [url = https: // flic. kr / p / 2ikBB5s] 2 [/ url] by [url = https: //www.flickr.com/photos/126459290@N04/] alberto espinosa [/ url], on Flickr
[url = https: //flic.kr/p/2ikxZtK] [img] [/ img] [/ url] [url = https: // flic. kr / p / 2ikxZtK] 3 [/ url] by [url = https: //www.flickr.com/photos/126459290@N04/] alberto espinosa [/ url], on Flickr
[url = https: //flic.kr/p/2ikBB6j] [img] [/ img] [/ url] [url = https: // flic. kr / p / 2ikBB6j] 4 [/ url] by [url = https: //www.flickr.com/photos/126459290@N04/] alberto espinosa [/ url], on Flickr
#17
Thread Starter
Yesterday I will receive what I think will be the last pieces of the Blazer, in 7 days of Rc4WD to my house:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
After several tests and tested in several places, they stay like this at the end:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Released !!! Pleasantly surprised on the ground, very happy
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
After several tests and tested in several places, they stay like this at the end:
Released !!! Pleasantly surprised on the ground, very happy
#18
Thread Starter
I leave a photo of Saturday in the hangout, I did not make a cabpar, this happened to me Tiko ... hehehe
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Here the result of the hangout hehehehe, it already has character!
by https://www.flickr.com/photos/126459290@N04/, en Flickr
And now I get inside:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Here the result of the hangout hehehehe, it already has character!
And now I get inside:
#19
Thread Starter
This weekend , read bed in matt black & interior paint .
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
#20
Thread Starter
2 of the emblems that I requested for the vanquish, I have put them on the Blazer, I did not want to load the Vanquish anymore and being chrome metallic, the Blazer is also very good.
Although I know how deformed, it is because of the brightness of the chrome, but these anagrams are beautiful, there are for more models: Club 5 Racing
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Although I know how deformed, it is because of the brightness of the chrome, but these anagrams are beautiful, there are for more models: Club 5 Racing
#21
Thread Starter
VIEWING THE PANORAMA of quarantine and teleworking, so in a little while I will see if I cover holes ...:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
it's time to outline and paint but it already has another pint
it's time to outline and paint but it already has another pint
#23
Thread Starter
In the absence of battery and brake pipes, the less it will remain:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
#24
Thread Starter
The order is FANATICRC with a gift mask !!
by https://www.flickr.com/photos/126459290@N04/, on Flickr
Seeing how it works with a Blazer body, I have decided to mount a Hilux, which surely goes better hehehe, now it is dremel and sierra ...:
Here is the difference in size, I do not have a scale, but the blazer, it weighs a lot and is huge lol
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
I have only put the body in its place and the first problems begin hehehehe another day more calmly I start with it to see if I can lower the body more, it is my idea from the beginning:
Here glue the glass support and central dashboard with the air filter:
by https://www.flickr.com/photos/126459290@N04/, on Flickr
and also, by height it is already sticking the filter in the hood, and the servo protrudes too far in front because it has the radiator:
by https://www.flickr.com/photos/126459290@N04/, on Flickr
There will be more progress soon
Seeing how it works with a Blazer body, I have decided to mount a Hilux, which surely goes better hehehe, now it is dremel and sierra ...:
Here is the difference in size, I do not have a scale, but the blazer, it weighs a lot and is huge lol
I have only put the body in its place and the first problems begin hehehehe another day more calmly I start with it to see if I can lower the body more, it is my idea from the beginning:
Here glue the glass support and central dashboard with the air filter:
and also, by height it is already sticking the filter in the hood, and the servo protrudes too far in front because it has the radiator:
There will be more progress soon
The following users liked this post:
DrFeelGood (10-17-2020)