Semi scale Courageous 12 meter
 

Here are a couple of pictures of a new hull that I designed in epoxy/carbon 60" long 12" beam. It is a semi scale model of US 26 Courageous. I used an EC12 as a base for a male mold, but this has little in common with an EC12 other than the upper area amidships. The keel is 3" deeper than an EC12 also, and the forward and stern sections are bigger. Will have an 80" mast height above deck. Will also have a trim tab on the rear keel as the full size 12 did that will deflect 2-3 degrees.