70" Storch landing gears drawings?
#1
Thread Starter
Join Date: Aug 2005
Location: Mississauga,
ON, CANADA
Posts: 4,196
Likes: 0
Received 1 Like
on
1 Post
70" Storch landing gears drawings?
I like to know whose Fieseler Storch model this is:
Ws 70"
Length 45"
Power 40sz glow
It needs oleos and struts, i don't have a clue whose kit or plans it's built from and nor the fellow who has it.
I would appreciate if someone on here can identify it so it's landing gears either could be bought or be made from plans if identified as a scratch built model.
Ws 70"
Length 45"
Power 40sz glow
It needs oleos and struts, i don't have a clue whose kit or plans it's built from and nor the fellow who has it.
I would appreciate if someone on here can identify it so it's landing gears either could be bought or be made from plans if identified as a scratch built model.
#2
Junior Member
Join Date: Apr 2006
Location: singleton, AUSTRALIA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
RE: 70" Storch landing gears drawings?
Could this be a swenson kit however the winspan would have to 96 inches. I am restoring a swenson storch and have a full set of plans including the u/c setup
which is a sprung orleo set up if you like i will post some photos
#4
Thread Starter
Join Date: Aug 2005
Location: Mississauga,
ON, CANADA
Posts: 4,196
Likes: 0
Received 1 Like
on
1 Post
RE: 70" Storch landing gears drawings?
Hi Fieseler156,
Couple guys have indicated that this model could be built from Bob Holman/Dennis Bryant plans due to 70.5" ws specs.
I sure would like to pictures of the landing gear drawings and gear built if possible as i'm sure those will be required to make newer Lg for it.
Couple guys have indicated that this model could be built from Bob Holman/Dennis Bryant plans due to 70.5" ws specs.
I sure would like to pictures of the landing gear drawings and gear built if possible as i'm sure those will be required to make newer Lg for it.
#5
Thread Starter
Join Date: Aug 2005
Location: Mississauga,
ON, CANADA
Posts: 4,196
Likes: 0
Received 1 Like
on
1 Post
RE: 70" Storch landing gears drawings?
ORIGINAL: fieseler156
I am restoring a swenson storch and have a full set of plans including the u/c setup
which is a sprung orleo set up if you like i will post some photos
I am restoring a swenson storch and have a full set of plans including the u/c setup
which is a sprung orleo set up if you like i will post some photos
Yes i would like to see your photos of the landing gear set-up, my model is indeed built from Dennis Bryant plans, everything on this model matches DB plans, now only thing my model is missing
are the main landing gears, i believe DB calls for fixed gears w/out oleo struts but i want to add oleos on the new landing gear that prolly i'll end up making out of airfoil shape aluminum tubes.
#6
My Feedback: (9)
Join Date: Jul 2002
Location: St. Charles, IL
Posts: 1,867
Likes: 0
Received 0 Likes
on
0 Posts
RE: 70" Storch landing gears drawings?
I've recovered enough from hand surgery to spend some time in my shop; so my DB Storch is finally going on the board.
You are correct, the DB landing gear does not have sprung struts. I have a plan, but would sure like to see some other photos.
Walt
You are correct, the DB landing gear does not have sprung struts. I have a plan, but would sure like to see some other photos.
Walt
#7
Thread Starter
Join Date: Aug 2005
Location: Mississauga,
ON, CANADA
Posts: 4,196
Likes: 0
Received 1 Like
on
1 Post
RE: 70" Storch landing gears drawings?
Hey Walt,
Can you post high res pictures of the plans where LG is shown how to make it, i want to see both options as if LG with oles are not possible then i'll make ones as on the plans. Thanks
I have engine for but i'm not sure how i can connect engine to brass scale muffler on this model, i don't think regular muffler will fit it due to muffler's extension arm's length!.
I'll post pictures of this muffler on the model soon, so you know what i'm talking about....
Can you post high res pictures of the plans where LG is shown how to make it, i want to see both options as if LG with oles are not possible then i'll make ones as on the plans. Thanks
I have engine for but i'm not sure how i can connect engine to brass scale muffler on this model, i don't think regular muffler will fit it due to muffler's extension arm's length!.
I'll post pictures of this muffler on the model soon, so you know what i'm talking about....
#10
Thread Starter
Join Date: Aug 2005
Location: Mississauga,
ON, CANADA
Posts: 4,196
Likes: 0
Received 1 Like
on
1 Post
RE: 70" Storch landing gears drawings?
ORIGINAL: Walt Thyng
Oops. Poor choice of words. I do not have printed plans; merely an idea.
Walt
Oops. Poor choice of words. I do not have printed plans; merely an idea.
Walt
Here is another picture showing another type of in cowl muffler system, wonder where i can get it from or something that would work as an alternative...
#11
Thread Starter
Join Date: Aug 2005
Location: Mississauga,
ON, CANADA
Posts: 4,196
Likes: 0
Received 1 Like
on
1 Post
RE: 70" Storch landing gears drawings?
Can anyone help me get drawings for the Storch's landing gears please, i got this model and want to make wire gears but i don't know exact length of the gears and the triangular strut that is connecting main strut to the fuselage?
I think 5/32" piano wire will make this gear very nicely.....
I think 5/32" piano wire will make this gear very nicely.....
#12
Banned
RE: 70
"I think 5/32" piano wire will make this gear very nicely..... "
I believe that if you find drawings of any kind of "scale", you will find that they are oleo types, and not just single strut, and really quite sophicated.
Les
I believe that if you find drawings of any kind of "scale", you will find that they are oleo types, and not just single strut, and really quite sophicated.
Les
#13
Thread Starter
Join Date: Aug 2005
Location: Mississauga,
ON, CANADA
Posts: 4,196
Likes: 0
Received 1 Like
on
1 Post
RE: 70
ORIGINAL: LesUyeda
''I think 5/32'' piano wire will make this gear very nicely..... ''
I believe that if you find drawings of any kind of ''scale'', you will find that they are oleo types, and not just single strut, and really quite sophicated.
Les
''I think 5/32'' piano wire will make this gear very nicely..... ''
I believe that if you find drawings of any kind of ''scale'', you will find that they are oleo types, and not just single strut, and really quite sophicated.
Les
If i could find bigger then 1/7th scale with oleo struts, i will try to make functional type but at minimum, i'll live with fixed gear type.
#18
Thread Starter
Join Date: Aug 2005
Location: Mississauga,
ON, CANADA
Posts: 4,196
Likes: 0
Received 1 Like
on
1 Post
RE: 70
These are great pictures Airportbum, Thanks. These drawing images tell me how the gear is made and mounted but it these does not tell me length of for the main strut from it's mounting point besides the fuselage to the axle?
If i can get that length as fully extended strut, i will start making landing gears for my model.
If i can get that length as fully extended strut, i will start making landing gears for my model.
#20
Thread Starter
Join Date: Aug 2005
Location: Mississauga,
ON, CANADA
Posts: 4,196
Likes: 0
Received 1 Like
on
1 Post
RE: 70
Thanks Walt, between ur pics and Airportbum's pictures i'm sure i will make landing gears for this model.
Guys i really need to know the length of the main Strut!, from the point where it attaches to links sides of the fuselage just slight lower then the window frames to the axle, if i can get this length i'll be on my way this will be first part i'll be making
these first.
Guys i really need to know the length of the main Strut!, from the point where it attaches to links sides of the fuselage just slight lower then the window frames to the axle, if i can get this length i'll be on my way this will be first part i'll be making
these first.