Pitts S1-S by EMHW
#2677
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
Two hours in on the perimeter tape and the ailerons are done. The ailerons are the worst part to me so got them out of the way first thing. I will let dry then trim and clean them up.
Next up, the tail feathers.
Next up, the tail feathers.
#2683
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
Took a break from taking a break and finished up the bottom wing halves. The top wing and fin/turtle deck are all that remains needing tape before ironing it all out.
#2685
My Feedback: (6)
Join Date: Feb 2003
Location: Grand Junction, Colorado
Posts: 1,484
Likes: 0
Received 4 Likes
on
4 Posts
Robert
Hey thanks for the picture of the pinking tape you used. I wanted to see a close up of the tape on the model actually. Did you build a jig and do the rib stitching under the tape?
Hey thanks for the picture of the pinking tape you used. I wanted to see a close up of the tape on the model actually. Did you build a jig and do the rib stitching under the tape?
#2690
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
It's getting real close! But unfortunately I am booked for baby sitting the next couple weeks so trips to the property is limited to half days. So! This morning I got up early and went to the property and picked up all the painting gear. I have painted on the side porch many times and looks like that is where this one will get painted. I will have to rescreen first, but, that's no big deal.
#2692
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
Frequent Flyer, you wanna make something that every scale or attempting to build scale modeler would absolutely love to have?
Pinking shears, we need a pair about half the full scale size.
Pinking shears, we need a pair about half the full scale size.
#2696
#2697
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
Nothing to show but something to tell, I have been ironing all day. And will probably be at it all day again tomorrow. I do not want any of the pinked edges popping up this time around!!!
#2699
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
You betcha!!!
I spoke with Stits this morning and they gave me some real good advice. After the final coat of Poly brush is sprayed, using parchment paper as a protective barrier between the iron and the poly brush, iron it again.
So, it should have that hot rod show room finish!!!
I spoke with Stits this morning and they gave me some real good advice. After the final coat of Poly brush is sprayed, using parchment paper as a protective barrier between the iron and the poly brush, iron it again.
So, it should have that hot rod show room finish!!!