Pitts S1-S by EMHW
#4728
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
I spent the morning up town but have finished trimming the glass lay-ups and added one last finish coat, I hope the last anyway. It is storming here so there will not be any painting done today. Hopefully first thing in the morning.
#4730
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
I did not accomplish what I wanted for the week on the Pitts, to many other things kept jumping in namely the boss. When I go up Sunday I will be there for two weeks so should be able to finish it up. Those glass frames I laid up turned out to be in the wrong place, the ones at the front anyway. And I don't care much for how the rear one turned out either, so, I have decided for now to just paint the frames on for appearance and git-er-dun! The canopy has been trimmed to fit and ready for separation from the windscreen.
Be back Sunday!
Be back Sunday!
#4738
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
I laid the frames up on a separate piece this time around. The frames will be attached via nuts and bolts except for the rear one, it will be attached by way of Goop. But! It could all be attached by means of foam safe ca.
And if I was a master I would not be doing things ten times before getting it right once.
And if I was a master I would not be doing things ten times before getting it right once.
#4741
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
LOL. I guess. For what it is worth I will be going back tomorrow. I would like to take the next three days and finish it up, the boss won't be there until Tuesday.
#4742
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
I made it back about three hours ago, had to play granddaddy today. I did not like the fit of the new canopy to the old windscreen frame so I have re-glassed it. In the morning, providing the screen is right, I will start the priming, sanding, and painting of all the frame parts. Things to be painted are the canopy frames, prop, and the spinner. If things go well I should be able to assemble everything by Tuesday. In the periods of waiting for coats to dry I will be working on the pilot, seat, and harness.
#4744
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
The finale on this one has really drug out, with a full recover, top wing recover after the full, and this canopy build I am more than ready to see it done and airborne.
I just completed the final glaze coat of resin so it should be good to go tomorrow, god I hope so anyway.
I just completed the final glaze coat of resin so it should be good to go tomorrow, god I hope so anyway.
Last edited by acerc; 04-25-2015 at 05:32 PM.
#4746
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
The windscreen glassing turned out real well. Everything has been primed, sanded, and repeated until ready for paint. I am thinking of running out to the parts store for a can of gold so as to not have to deal with getting everything out for an ounce worth of paint. But then again I have to paint the spinner red, hmm, and the prop black and white. Problem with painting today is the weather is real nasty so it may have to wit until tomorrow.
Last edited by acerc; 04-26-2015 at 10:43 AM.
#4747
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
The rain cleared out somewhat so I got some painting done. All the gold is done, the spinner is red, and as soon as I finish this post I will go get some black for the prop, I have the white.
I'm not going to say anything other than I am getting excited!
I'm not going to say anything other than I am getting excited!