Pitts S1-S by EMHW
#5126
Do I feel a 57% pitts build coming our way, the bigger the better,
And yes, you don't want to expose your personal information through a public / open WiFi... with all those malicious scripts out there, you don't need to take any chances... I have a beater of a laptop I use for such purposes; stripped bare bones, with nothing of any value on it... doesn't get used much anymore, but it was used for work when on the run.
John M,
Last edited by John_M_; 07-04-2015 at 09:22 PM.
#5127
Here I am playing catch-up again, been out of it for a while but I'm back.
I'm glad you had a good time Ace! I love watching that thing fly and I love listening to it as well, just awesome! And I'm REALLY looking forward to you pics! Safe journeys!
Oh, as for the CG thing.... Not touching it!!!
I'm glad you had a good time Ace! I love watching that thing fly and I love listening to it as well, just awesome! And I'm REALLY looking forward to you pics! Safe journeys!
Oh, as for the CG thing.... Not touching it!!!
#5128
yeah public wi fi is a big risk. You can get a hot spot that will basically firewall you. Even you smart phones. Only use it when you need to as data overage are ugly things.
You mentioned a toy hauler and you own room. That sounds like a good way to go. Travel trailer or 5thr? For internet that way the hot spot if you are careful of data. You can also look at wifi boosters with external antennas and the hook the booster up to your own wifi. Vastly more range. There are many technical steps that could be taken to even more protect yourself on the internet, but this thread is not the place for those discussions.
Ken
You mentioned a toy hauler and you own room. That sounds like a good way to go. Travel trailer or 5thr? For internet that way the hot spot if you are careful of data. You can also look at wifi boosters with external antennas and the hook the booster up to your own wifi. Vastly more range. There are many technical steps that could be taken to even more protect yourself on the internet, but this thread is not the place for those discussions.
Ken
#5130
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
Ok, fella's. 23 hours on the road with a two hour nap in the middle I have finally loaded the photos. Here are a few of Jacquie checking out her ride, then some big guy's came through and had to stop and check it out also, and a wrap up of the two of us.
#5133
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
Thank you!
Very, and I forgot that story. When I was getting it set-up I noticed the wing to cabane mount was a bit loose. I don't know why or even if it is anything to be of concern but we decided not to fly it. We agreed I would have it absolutely finished and ready for her when she comes down the first of next year for Sun n Fun. She did get to drive it in the grass between the taxiway and runway. Here is a pic where she was driving and I was holding the kill switch just in case.
Very, and I forgot that story. When I was getting it set-up I noticed the wing to cabane mount was a bit loose. I don't know why or even if it is anything to be of concern but we decided not to fly it. We agreed I would have it absolutely finished and ready for her when she comes down the first of next year for Sun n Fun. She did get to drive it in the grass between the taxiway and runway. Here is a pic where she was driving and I was holding the kill switch just in case.
#5137
That is "priceless" Robert... I can see she was moved by seeing it's presents; must have been a great experience to share that with her... shame about the cabane bolts, but it was the right choice not to risk it.
I'm envious to say the least, this whole project has been very enjoyable to witness, and then to see you and Jacquie standing next to the completed project really puts everything into perspective, well done !... you need to get this written up in a modeller magazine, it would be a great read, and cover story... maybe by early next year you'll have a magazine interested enough to show up at the SUN n Fun event and document the entire story.
Very unique project,
John M,
I'm envious to say the least, this whole project has been very enjoyable to witness, and then to see you and Jacquie standing next to the completed project really puts everything into perspective, well done !... you need to get this written up in a modeller magazine, it would be a great read, and cover story... maybe by early next year you'll have a magazine interested enough to show up at the SUN n Fun event and document the entire story.
Very unique project,
John M,
#5138
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
Thank you Kevin. You are working on a cool one for you, hope it goes as well.
#5139
My Feedback: (3)
Join Date: Jul 2010
Location: Whittier,
CA
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
Way to go Robert!! Great job in all the hard work you put into building the kit and research to make it a beautiful scale Bipe. The first pic looks like she's ( Jaques ) is crying. What a touching moment. Very nice!!! Also the thumbs up from the pilot passing in his airplane is really cool!! I also have been following the build since the beginning and think this would make a great story to share in one of our modeler magazines. A big thumbs up to you from all of us!!!
Jeff
Jeff
#5140
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
That is "priceless" Robert... I can see she was moved by seeing it's presents; must have been a great experience to share that with her... shame about the cabane bolts, but it was the right choice not to risk it.
I'm envious to say the least, this whole project has been very enjoyable to witness, and then to see you and Jacquie standing next to the completed project really puts everything into perspective, well done !... you need to get this written up in a modeller magazine, it would be a great read, and cover story... maybe by early next year you'll have a magazine interested enough to show up at the SUN n Fun event and document the entire story.
Very unique project,
John M,
I'm envious to say the least, this whole project has been very enjoyable to witness, and then to see you and Jacquie standing next to the completed project really puts everything into perspective, well done !... you need to get this written up in a modeller magazine, it would be a great read, and cover story... maybe by early next year you'll have a magazine interested enough to show up at the SUN n Fun event and document the entire story.
Very unique project,
John M,
I have been told there is one magazine that may do an article, and, the gentlemen doing the photos for Jacquie also wants to do a small internet article. But to be quite honest, from the beginning all I wanted was to build a big and beautiful airplane, I called it my lifetime "McDaddy plane". Then I came across the Eagle, then Jacquie joined the quest, then I got to experience sharing my work with the owner. I don't think I will have another build as special as this one has turned out and I will treasure it.
I appreciate everyone on the forums joining me for this ride, good or bad, agree or disagree, sharing our work with the world is very rewarding but it takes you guys being here to make that happen.
Thank you to everyone!
#5141
Well its nice to see someone fulfill their dreams, especially in this day and age... I hope you can get at those cabane bolts without having to cut into it.
Just goes to show you the stresses that go into the structure... if anyone understands the safety concern, she does, "do it right or don't do it at all"
John M,
Just goes to show you the stresses that go into the structure... if anyone understands the safety concern, she does, "do it right or don't do it at all"
John M,
#5142
My Feedback: (3)
Thank you john. This has been a most fulfilling journey and to be able to have the actual pilot share the ride is very fulfilling and very unique. The cabane was not the only concern for me, being this was a rush in those last couple of days a few things were of concern. Mostly the fact I have not had a chance to operate the new wireless link for the buddy box. But also not having actually completed the process of maiden flights left some reservation as well. I could have overcome the last two easily but the cabane was to much.
I have been told there is one magazine that may do an article, and, the gentlemen doing the photos for Jacquie also wants to do a small internet article. But to be quite honest, from the beginning all I wanted was to build a big and beautiful airplane, I called it my lifetime "McDaddy plane". Then I came across the Eagle, then Jacquie joined the quest, then I got to experience sharing my work with the owner. I don't think I will have another build as special as this one has turned out and I will treasure it.
I appreciate everyone on the forums joining me for this ride, good or bad, agree or disagree, sharing our work with the world is very rewarding but it takes you guys being here to make that happen.
Thank you to everyone!
I have been told there is one magazine that may do an article, and, the gentlemen doing the photos for Jacquie also wants to do a small internet article. But to be quite honest, from the beginning all I wanted was to build a big and beautiful airplane, I called it my lifetime "McDaddy plane". Then I came across the Eagle, then Jacquie joined the quest, then I got to experience sharing my work with the owner. I don't think I will have another build as special as this one has turned out and I will treasure it.
I appreciate everyone on the forums joining me for this ride, good or bad, agree or disagree, sharing our work with the world is very rewarding but it takes you guys being here to make that happen.
Thank you to everyone!
It has been great to see the finished product and know that the builder is smart enough to make the correct decisions about system conditions. If it ain't right on the ground it ain't gonna get better in the air!
I went to test fly a new 100+ inch Extra on the 4th and the new Spektrum AR9110 power safe receiver gave up the ghost. Luckily that happened during my preflight and not in the air. Since some of the servos need non-standard voltages compared to most RX's I took it apart and packed it up.
#5143
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
Well its nice to see someone fulfill their dreams, especially in this day and age... I hope you can get at those cabane bolts without having to cut into it.
Just goes to show you the stresses that go into the structure... if anyone understands the safety concern, she does, "do it right or don't do it at all"
John M,
Just goes to show you the stresses that go into the structure... if anyone understands the safety concern, she does, "do it right or don't do it at all"
John M,
#5144
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
I have been extremely busy doing all sorts of things, from (terminally) rolling my Gere Sport through the treetops (I only needed another 5 feet!), starting another airplane, and building, and then rebuilding computers so I not been around for a bit. Thank you for posting the pictures and yes, you are absolutely correct about the CG issue which is a common problem in more kits than I wish to talk about. Actually there was a kit in the 1980s that had the CG so far out of line that I know of no aircraft that survived the first flight and several folks tried. They all flew nicely until the power reduction.
It has been great to see the finished product and know that the builder is smart enough to make the correct decisions about system conditions. If it ain't right on the ground it ain't gonna get better in the air!
I went to test fly a new 100+ inch Extra on the 4th and the new Spektrum AR9110 power safe receiver gave up the ghost. Luckily that happened during my preflight and not in the air. Since some of the servos need non-standard voltages compared to most RX's I took it apart and packed it up.
It has been great to see the finished product and know that the builder is smart enough to make the correct decisions about system conditions. If it ain't right on the ground it ain't gonna get better in the air!
I went to test fly a new 100+ inch Extra on the 4th and the new Spektrum AR9110 power safe receiver gave up the ghost. Luckily that happened during my preflight and not in the air. Since some of the servos need non-standard voltages compared to most RX's I took it apart and packed it up.
Yep you have been busy, to busy. The CG of the kit is not the issue, although you are correct about kit CG's, but my math was incorrect as to the new CG after changing the wings and moving the engine forward of the listed point. The balance is another story of which I hope I don't get stirred back up. And I am glad to see a few understood that concept and it will be corrected in the next week or so.
Very glad the Extra showed the issue on the ground and not in the air. I know a lot of guys at my field have issues with Spektrum, that's not to say it is a Spektrum thing, but a thing just the same.
One last note, I hold to the notion that if it ain't right on the ground it will get worse in the air. LOL!
Last edited by acerc; 07-07-2015 at 07:17 AM.
#5145
I don't think the cabane mount is a stress issue but rather a bolt issue. The wing to cabane is a 4-40 through the wing mount and a tube through the cabane. The wing mount is held by two 6-32 bolt's into the wing with blind nuts on the back side. If I were taking a guess I would say those two 6-32's have backed out a turn. These type's of issues are also why I said when I return from the trip I was going to disassemble the plane, correct known issues, check for the unknown, and make the changes mentioned in previous post.
You are right about the first several flights being considered part of the maiden process... its just like in the RW, there's a process of eliminating the potential weak areas before anything is certified airworthy.. and the fact you found those loose bolts just proves what I said previously about your meticulous maintenance regiment.
I knew someone back a few years that was a damn good RC pilot, flew by the seat of his pants, but his aircraft's didn't last him more than a season because he was so reckless in his thinking, he just didn't give a damn, typical barn stormer / daredevil mentality... but then again calculated risks is what pushes a pilots skills and improves their skill level, but with this guy it was all out or nothing... he would have flown with those loose bolts and said I'll fix it later.
John M,
#5147
You could always try and silver solder a nyloc nut to the back side of a "T" nut, but the temperature would be difficult to control to prevent the nylon insert from melting... some low low temp solder may work.... or maybe silver solder a "flexloc nut", or "cleveloc Nut" to a "T" nut; both are all metallic / deformed nuts that provide resistance to the threads.
John M,
John M,
#5148
My Feedback: (3)
I don't think the cabane mount is a stress issue but rather a bolt issue. The wing to cabane is a 4-40 through the wing mount and a tube through the cabane. The wing mount is held by two 6-32 bolt's into the wing with blind nuts on the back side. If I were taking a guess I would say those two 6-32's have backed out a turn. These type's of issues are also why I said when I return from the trip I was going to disassemble the plane, correct known issues, check for the unknown, and make the changes mentioned in previous post.
It turns out what happens is that as you do various maneuvers, the top wing shifts but that shift is hidden and is only seen as load on the structure. By adding bolts on top of the T nuts, you will have taken the 'slack' out of that part of the structure that flexes so the movement is applied totally to the bolt. The struts just are not enough to hold that top wing on even if this happens to occur at the top of an Immelman, which is where my Super Stinker came apart. That was one hell of a landing! The hardest part was NOT watching the top wing flip its way to the ground.
In short, add lock washers to the bolts AND use Locktite and put those on your preflight list.
#5149
Thanks for posting that Jim
I have an unfinnished cl biplane that uses 4 40 bolts thruogh strut pads into T-nuts and lower wing attach bolts into T-nuts.
I will revist those areas before closing up the structures
Ken
I have an unfinnished cl biplane that uses 4 40 bolts thruogh strut pads into T-nuts and lower wing attach bolts into T-nuts.
I will revist those areas before closing up the structures
Ken
#5150
Thread Starter
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
Good discussion and info. But as it stands I really have no idea as to the cause, but will find out soon enough. I have used plastic epoxied to the backside of T-Nut's, drilled and then tapped with the bolt, as a lock before. In this situation thread lock would do the trick of which I think I did. It could turn out as simple as needing a shim where the bolt goes through the wing and cabane mount. But this is all just speculation for now. As for the 4-40, if I did not think it was up for the task I would not have used it, I think the brass would tear before the bolt broke. I also have 4-40 bolts attaching the wings to the struts and they are 1-1/2" and 2".
As for Jim's scenario, if the top wing came loose it would be all over. There is no way the bottom wing tube would hold with the planes full load.
As for Jim's scenario, if the top wing came loose it would be all over. There is no way the bottom wing tube would hold with the planes full load.
Last edited by acerc; 07-07-2015 at 04:34 PM.