RE: 1/6th Scale HE-111
 

Got the Bomb Rack Finished only thing left to do to it later is add slots for the fuse formers to attach top when I get that far with the fuse

http://www.proflooney.net/he-111/fuse-87.jpg

http://www.proflooney.net/he-111/fuse-86.jpg

RE: 1/6th Scale HE-111
 

Hey Joe.. lookin great.. From your pics, looks like your bomb racks need some adjustment? looks like the taper at the top should be 2 1/2 times longer or so? I'm going to get in the shop today and make some landing gear parts...

RE: 1/6th Scale HE-111
 

I agree. It would make sense the the side of the top triangle would more or less fit with the curve of the fuse wall at that level. This is perhaps an instance of how difficult it can be to see the "big picture" when working in CAD, where you have to be so focused on the minutia and the technical aspects. It's hard to "step back" from the screen.

RE: 1/6th Scale HE-111
 

I would assume it's more a product of the materials used. i.e: The models fuse formers need to be thicker being built out of wood, compared to the original metal formers. So using a thicker wooden fuse former would certainly take away the available "height" that can be used for a 100% scale bomb rack

RE: 1/6th Scale HE-111
 

.....or else use modern composite materials.

RE: 1/6th Scale HE-111
 

or it is just the fact it was wee hours in the morning and been drawing for abt 14 hrs yesterday trying to figure it all out and so now have to tweak things lol

RE: 1/6th Scale HE-111
 

Todays Magic Numbers secure.join.me/659-430-589 and Iwill be adjusting the bomb bay lol funny hop something that wont be seen gets so much scrutiny lol no biggy it should be right ifn Iam going to do it. Imainly made it so that it would be integral in the center fuse framing to strengthen the area around where the wing is since Iam doing the non standard wing mounting to give ppl an easy bomb bay. but what the heck its only enlarging 1 hole and changing an angle on 8 parts then redoing 8 more parts just a mere 3 hrs work hehe.

and no abu Isaw the angle wasnt near as sharp but i wasnt too worried abt it. and you are all wrong on your thingking. it is much easier to stand back and look at things when you are drawing it up in 3d cad where as traditional method be it pencil and paper or 2D cad you cant view it at all. you have to assemble the parts to see if it looks right or even fits. here in 3D world if it goes together in the computer and fits you are guaranteed it will go together and fit 100% when the kit is cut.

Plus paint boy is also correct the fuse formers are a ton thicker than the original aircrafts metal formers were. so i did tweak a few things on the size of the bomb rack but no biggy thats why Ido this online to get input from you guys and Idont take any of it personal

RE: 1/6th Scale HE-111
 

ok kiddies I have the bomb Bay all fixed and its finalized except possibly for the 2 outer walls I might take the slots out so that I can notch the fuse formers to slot into to make everything joined together for strength where the wing is

http://www.proflooney.net/he-111/fuse-88.jpg

http://www.proflooney.net/he-111/fuse-89.jpg

RE: 1/6th Scale HE-111
 

well extracted the wing ribs today and got those arranged. I need to think on a few things before moving forward mainly how to do the flaps. since the flaps are 1 piece and extend well past the nacelles and the break point of the wing I need to figure out how to do the break. in the mean time ill sit here doing tedious things like stringer notches in the JU-88 and get them out of the way while i try to figure out how I want to do the flaps.

http://www.proflooney.net/he-111/fuse-90.jpg

http://www.proflooney.net/he-111/fuse-91.jpg

RE: 1/6th Scale HE-111
 

Hey guys sorry for delays in postings but with xmas coming up Ibeen doing honey dos, shopping, and babysitting grandkids so my boy and his wife can shop. Today Iam just trying to relax so messing around adding the stringers to the JU-88

RE: 1/6th Scale HE-111
 

hey guys sorry not much activity but i was out of town last year for xmas and so this year wifes making up for it and so been busy.

Pam and I would like to wish everyone a Merry Xmas and safe Holidays

Will be back at it after xmas here so stay tuned as i want to order some parts and get started framing sometime just after the first.

RE: 1/6th Scale HE-111
 

Joe,
All the best wishes to you and your family. Later.

Reuben

RE: 1/6th Scale HE-111
 

ProofLooney; best wishes for you too...

RE: 1/6th Scale HE-111
 

Any chance to see more progress on the plan after the holidays???

RE: 1/6th Scale HE-111
 

inatley Iwill be starting on it again by next weekend and getting it so I can gert the parts cut for the fuse and on their way to me

RE: 1/6th Scale HE-111
 

Do you plan to have as many ribs as shown on your drawing?

RE: 1/6th Scale HE-111
 

doubt that many by the center section i just put scale ribs in3 until i figure which ones Iactually need

RE: 1/6th Scale HE-111
 

the big thing is trying to figure out the flaps as they one piece and the wing break will be in the middle of the flap. Italked this over with Jerry Bates and he recommends a removeable flap

RE: 1/6th Scale HE-111
 

Removable flaps works for me!

RE: 1/6th Scale HE-111
 

hey guys hope everyone had a good holiday. I caught a bad bug just after xmas and ended up in the hosp with pneumonia. just got out couple days ago and feeling better now so I will be getting back on this beasty.

Also I been getting tons of people asking me abt my betty bomber. well when I moved back from phoenix my hd got fried and i lost my work. but due to the overwhelming number of requests for it I will be recollecting my data and redoing the Betty once I get this one going to where I can start Building on it.

Will post pices once I get my head wrapped around where I was at.

RE: 1/6th Scale HE-111
 

Hey Prof; I'm glad you're back...

RE: 1/6th Scale HE-111
 

thanks im trying to get reorganized from the time off and arranging parts to get sent off to the laser

Hi Prof, I am missing your updates to this thread. Any more news you can share on the Heinkel?

Good point... Where'd you go Joe? I have the landing gear design done... just have to build it one of these days.

Prof did you ever finish you 1/2 scale albatross?