RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   RC Scale Aircraft (http://www.rcuniverse.com/forum/rc-scale-aircraft-169/)
-   -   ROYAL - MARUTAKA and MK KITS COMPLETE LISTING (http://www.rcuniverse.com/forum/rc-scale-aircraft-169/9401552-royal-marutaka-mk-kits-complete-listing.html)

CaptainBlueSky 01-09-2010 02:55 PM

ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 

Hello Royal/Marutaka fans, I am trying to compile a list of all models that were produced by Marutaka in OSAKA and distributed in the USA by Royal Products.
Mr. Masahiro Kato was responsible for designing and drawing the plans. Some of his warbirds were already sold before under his own kit label MK for M. Kato Model Aircraft Manufacturing Co. Ltd. Further on this later, I will make another list for MK kits.
Numbering has been sometimes confusing and it will need a separate list for Royal and Marutaka to clear this out. If you own a Royal catalog, an old Marutaka or MK brochure , please scan and email.
My informations are mainly coming from Marutaka.
I will edit and complete as informations become available. Please, feel free to post or email any error or missing datas :)

MTK-001 Mitsubishi A6M5 Type 0 model 52 "ZERO" or "ZEKE" FIGHTER 1:6 WS 1592mm 3.2- 3.5 Kg .60 2 cycles engine
Full scale. A = carrier-based fighter 6= sixth in this category to be built for the Imperial Navy M= Mitsubishi 5 = 5 th model
http://nsm02.casimages.com/img/2009/...6345130735.jpg
1:6 Royal/Marutaka plan slightly enlarged to 70" wingspan and scratch built by frets24
http://nsm02.casimages.com/img/2009/...6345130182.jpg


MTK-002 Mitsubishi A6M3 Type 0 "ZERO" or "ZEKE" FIGHTER model 22

1:8 WS 1480mm S 37,5 dm² Weight 2,6- 2,9 kg .40 2 cycles RC 3 - 5 servos

MTK-003 Mitsubishi "ZERO" FIGHTER
1:10 WS 1180mm S 23 dm² Weight 1,5- 2 kg .19-.25 2 cycles RC 3 - 4 ch


MTK-004 Nakajima A6M2-N "Rufe" FLOATPLANE: FIGHTER based on A6M-2 Model 11 with modified tail and floats.
1:8 WS 1480mm S 37,5 dm² 3,2 -3,6 kg .60 RC 4-5 ch.
http://nsm02.casimages.com/img/2010/...6345185113.jpg


MTK-005 Nakajima Ki-43 Hayabusa type 1 "Oscar", Japanese fighter plane 1:7.2 WS 1500mm S 40 dm² 3- 3,5 kg .60 RC 4-6 servos
http://nsm02.casimages.com/img/2009/...6345151955.jpg


MTK-006 JUNKERS JU87 D-5 STUKA (from Sturzkampfflugzeug which means diving bomber) 1:7.65 WS 71 " 760 Sq./in. .60 - .80 4-5 ch.
http://nsm02.casimages.com/img/2010/...6345234790.jpg
http://nsm03.casimages.com/img/2010/...6345526069.jpg

There is also a JU 87 B2 version, scale 1/8.3 WS 65 3/8 Surface : 697Sq./in. or 45 dm² 3.2 - 3.7 kg 78 lbs .60 engine and I have a KATO Model Aicraft JU 87 D-5 ( MK Kit) average scale 1:7.3 WS 1875 mm 51,4 dm² 4 kg

MTK-007 CHANCE - VOUGHT F4U-1D CORSAIR 1:8 1570mm 3,2-3,6 kg .60 4-6 ch.
http://nsm02.casimages.com/img/2009/...6345152009.jpg
Look at these flaps! Canopy is sliding to show full cockpit details, among others, a very good work ! One of Luke's masterpieces. Unfortunatly, I can't find his build thread anymore but Kelsey_B very kindly started this one [link=http://www.rcuniverse.com/forum/m_3919130/mpage_1/key_/tm.htm]Kelsey_B Corsair 60 Build thread[/link]


MTK-008 CHANCE - VOUGHT F4U CORSAIR .40 WS 1300 mm 31 dm² 2,5 - 2,8 kg

MTK-009 NORTH AMERICAN P-51D MUSTANG 1: 6.85 WS 1644mm 47,3 dm² 3,6 - 4kg .60 5-6 ch

MTK-010 NORTH AMERICAN P-51D MUSTANG 1:8 WS 1410mm s 37,2 dm² 2,6 - 3 kg .40 RC 4-6 servos

MTK-011 NORTH AMERICAN P-51D MUSTANG 1:9,6 WS 1175mm 24 dm² 2 - 2,5 kg .19 - .25 3 - 4 ch. .20

MTK-012 DOUGLAS C47 - DC3 1:13,7 WS 2112mm 49,5 dm² 3,8 - 5kg .35 - .40 x2 4 - 6 ch.

MTK-013 NORTH AMERICAN B-25 MITCHELL "Billy" WS 70 7/8" 1800mm , 750 sq in. 47 dm² 4,5- 4,8 kg .40 - .45 x2 4 - 6 ch.

MTK-014 CESSNA SKYMASTER 1:6 WS 1942mm S 52 dm² 2,8 - 4,8 kg

MTK-015 CESSNA 310 Q 1:6.86 WS 1850 mm S 46 dm² 4 - 4,5 kg 2 x .40

MTK-016 PARTENAVIA P- 68 VICTOR 1:7.5 WS 1600 mm S 33,55 dm² 2,8 - 3,3 kg 2x .19 - .25

MTK-017 Mc Donnell Douglas F-4 PHANTOM II WS 1200 mm Wing area 34 dm² 2.5 - 3 kg .40- .60 4-5 ch

http://nsm02.casimages.com/img/2010/...6345203186.jpg
http://www.f-4.nl/f-4j158350.jpg
First flight in 1958. Was still in service in 5 countries 50 years after! More than 5000 were built, until 1981 !

MTK-018 PITTS SPECIAL S-1 1:6,86 WS 1422mm 58,55 dm² 3,4 - 3,9 kg .50 - .60 4 ch.

MTK-019 PITTS SPECIAL S-2 1320mm 53,4 dm² 2,8 - 3,5 kg .40 - .60 4ch.

MTK-020 FOCKE-WULF Fw 190 A8 1:7 WS 1530 mm 39dm² 3,2 - 3,5 kg .49 - .60 4- 6 ch.

MTK-021 SUPERMARINE SPITFIRE MK8
http://upload.wikimedia.org/wikipedi..._p7350_arp.jpg 1:6.9 WS 1637mm S 47.5 dm² 3- 3.5 KG .60 - .61 RC 4- 6 servos

MTK-022 GRUMMAN F8F BEARCAT 1:6,85 1580mm 47,5 dm² 3,5- 4 kg .60 - .80 4 - 6 ch.

MTK-023 CESSNA 172 1:8 1376 mm 25dm² 2 - 2,5 kg .19 - .25 3 - 4 ch.

MTK-024 Beech Craft D-17 Staggerwing 1 : 6,86 WS 1422mm S: 58,55 dm2 3,4 - 3,9kg .60 RC: 4 - 6
http://nsm02.casimages.com/img/2009/...6345125250.jpg



MTK-025 BLERIOT XI 1:6 1310mm 2 - 2,6 kg .40 - .50 3 - 4 ch.


MTK-026 ZERO FIGHTER A6M2 Type 0 model 21 1240mm 26 dm² 1,5 - 1,7 kg .20 - .25 3-5 ch.
http://nsm02.casimages.com/img/2010/...6345203076.jpg
Aichi D3A1 "Val" and A6M2 type 0 Model 21 replica ( Full scale flying model)

MTK-027 B-17E FLYING FORTRESS 1:16 1980mm 52dm² 4,5 - 5 kg .20 x4 4-6 ch.

MTK-028 PITTS Little Half ½A WS 800mm 21,6dm² 0,9 - 1,2 kg .10 - .15 3 - 4 ch.

MTK-029 Mini Devil sport WS 875mm surface 14 dm2 580 - 1000 gr. .06 - .09 2 - 4 ch.

MTK-030 Mini Bird sport WS 820 mm surface 12,8 dm2 400 - 600gr. .049 - .060 2ch.

MTK-031 Mini Bee sport WS 900 mm 14 dm² 550 - 700gr. .049 - .10 2 - 3 ch.

MTK-032 Mach Mini sport WS 800mm surface 13 dm2 400 - 650 gr. .049 - .06 2ch.

MTK-033 Mini Safe sport WS 900 mm 14 dm² 550 - 700gr. .049-.06 2 ch.

MTK-034 BLERIOT XI WS 1170mm 1 - 1,4 kg .09 - .15 2 - 3 ch.


MTK-035 ZERO FIGHTER A6M5-52 fuselage Epoxy 1:8

MTK-036

MTK-037 MESSERSCHMITT BF 109E 1:6,4 WS 1541mm 40dm² 3,3 - 3,5 kg .60 4 - 6 ch.
http://nsm02.casimages.com/img/2009/...6345130181.jpg
Another model built by Frets24


MTK-038



MTK-039 ZERO FIGHTER ½A WS 916mm 15dm² 0,8-1kg .051-.10 2-3 ch. .19-.35

MTK-040 NORTH AMERICAN P 51 MUSTANG ½A WS 900mm 14 dm² 0,7-0,9 kg .051- .10 2-3 ch.

MTK-041 CHANCE - VOUGHT CORSAIR F4U-1D ½ A 900mm 14,8 dm² 0,8-1kg 2-3 ch.
http://nsm02.casimages.com/img/2009/...6345130245.jpg
Thanks to Scale Dail


MTK-042 SUPERMARINE SPITFIRE MKI ½ A WS 900mm S 14,3 dm² 0,6-1 KG .051 .10 RC 2-36 ch

MTK-043 MESSERSCHMITT BF 109E 1/2 A WS 900mm 14,8 dm² 0,6 -0,8 kg .049-.10 2-3 ch.


MTK-044 Mitsubishi J2M3 Model 21 RAIDEN "Jack" WS 920mm 16,5dm² 0,8-1,2 kg .10-.15 3-4 ch.

MTK-045 ZERO FIGHTER WS 1200mm 24 dm² 1,7-2,2 kg .19-.40 3-4 ch.

MTK-046 KNIGHT WAY Sport WS 1200 mm 1 -1.5 kg wing area 27.6 dm² 0.20 - 0.25 3 - 4 ch.

MTK-047 BEECH BARON 1:6.85 WS 1790mm S 44dm² 4-4.5 kg .25-.40 RC 4-6 CH


MTK-048 PIPER SUPER CUP PA-18 Large Scale
1:4 WS 2680mm S 104 dm² 6-8kg .90 - 1.20 RC 4-5 CH


MTK-049 Mitsubishi J2M3 Model 21 RAIDEN "Jack" 1:8.5 WS 1270mm .25- .40 4- 5 ch. FRP molded fuselage
http://image2-8.rcuniverse.com/e1/fo...99/Ca80348.jpg



MTK-050 Mitsubishi J2M3 Model 21 RAIDEN "Jack" 1:7 WS 1543mm .60 6 ch. FRP molded fuselage


MTK-051 CESSNA L-019 Bird Dog Large Scale 1/5 WS 88.9 " 12 1/2 lbs 0.60 - 0.90 5 servos

MTK-052 CHANCE - VOUGHT CORSAIR F4U-4 1:11 WS 1135mm S 24 dm² 1,6-1,8 kg .20-.35 RC 3-4 CH.

MTK-053 MIGHTY KNIGHT Trainer - Stunt model WS 1180 mm S 26.6 dm² 1.4- 1.9 kg .19- .25 RC 3- 5 CH

MTK-054 KAWASAKI KI-61 "HIEN" " Tony" 1:9.14 WS 1390 mm 28 dm² 2- 2.2 kg .20- .25 4CYCLES .35-.40 4 - 5 CH
http://nsm02.casimages.com/img/2010/...6345163800.jpg
Mr. Kato behind his small size version of KI-61

MTK-055 CESSNA 500 CITATION 1:8.5
http://nsm02.casimages.com/img/2009/...6345124381.jpg

MTK-056 HOLIDAY trainer WS 1560mm S 37,5 dm² 2.1-2.7kg .25 - .40 RC 3-5 CH

MTK-057 F-4 PHANTOM Length 810mm wingspan 795 mm surface 15 dm2 650 gr - 850 gr. 0.51-0.10 2 - 4 ch.

http://nsm02.casimages.com/img/2010/...6345221569.jpg

MTK-058

MTK-059

MTK-060

MTK-061 MITSUBISHI T2 TOP GUN BLUE IMPULSE length 1038mm wingspan 980mm wing area 20 dm² 1.6kg - 1.8 kg 25 F 3- 4 ch.
http://nsm02.casimages.com/img/2010/...6345221581.jpg
http://aviation-photo.fvr-home.nl/Tr...s/DSC_8937.jpg
This T2 is built by Mitsubishi under Jaguar License.
http://nsm02.casimages.com/img/2010/...6345185885.jpg



MTK-062 MITSUBISHI T2- F1 surface 39 dm2 3,3 – 3,5kg .40 - .50 RC 4 – 6 servos

MTK-063 LUCKY SUN trainer WS 1500mm S 40dm² 2.2-2.5kg .40 RC 4 CH

MTK-064 LOCKHEED P-38 LIGHTNING
http://nsm02.casimages.com/img/2010/...6345217578.jpg


MTK-065 CURTISS HAWK P6E Biplane 1:6 WS 1600mm 3,5 .- 4 kg .61 - .90 RC 4 servos
http://nsm02.casimages.com/img/2010/...6345219901.jpg
Thanks to Scale Dail

MTK-066 CHANCE - VOUGHT F4U-1A CORSAIR 1:5 WS 2498mm or 98 1/16" S 117 dm ² or 1,814 SQ IN 8- 10 kg or 18- 22 lbs gasoline 35-50 cc Large Scale

MTK-067 NORTH AMERICAN AT-6 Texan WS 1843mm S 50dm³ 3.5-4 kg .61-.90 RC 6 CH

MTK-068 BOEING pt-17 STEARMAN Biplane 1:5.65 3,9 -4,2 kg .61 - .90 RC 4 servos

MTK-069 SUN FISH Tail-less sport model WS 1180 mm S 32.2 dm² 1.2-1.4 kg .20-.25 RC 3-4 CH

MTK-070 REED FALCON Sport Biplane 3,8 kg .61 RC 4 servos
http://nsm02.casimages.com/img/2009/...6345125249.jpg
MTK-071 BOEING P-26A PEASHOOTER 1:5 WS 1700mm 3,8 – 4,3 kg .90 RC 4 – 5 servos
http://nsm02.casimages.com/img/2010/...6345188826.jpg
http://nsm02.casimages.com/img/2009/...6344981652.jpg


MTK-072 STINSON RELIANT SR-8 1:6 WS 84 1/3 " 4,5 - 5 kg .60 - .90 RC 4 - 5 servos
http://cdn-www.airliners.net/aviatio.../3/1472383.jpg
Copyright Mr. KianHong. Larger picture on http://www.airliners.net/photo....ot



MTK-073 ACROSTAR, Stunt trainer Fuselage Epoxy surface 69,5 dm2 5,9 – 6,5 kg .108 RC 5 servos

MTK-074 NORTHROP P-61 BLACK WIDOW
WS 1827mm S 51 dm² 4,5 Kg 040 X2 5-6 CH.
http://nsm02.casimages.com/img/2010/...6345185338.jpg

MTK-075 GRUMMAN F6F-3 HELLCAT 1:8 4 – 4,3 kg .60 - .90 RC 5 – 6 servos
http://image2-9.rcuniverse.com/e1/fo...22/Om33949.jpg

MTK-076 Curtiss P40-E Warhawk FLYING TIGERS

That's all Folks !

NOT YET CLASSIFIED: Spirit of St. Louis, Cessna 206, Cessna 182 Skylane, Raiden all wood WS 1270mm, KAWASAKI KI61 HIEN ws 68 1/4 " ... + another Zero:MTK-??? Mitsubishi A6M3 "ZERO" or "ZEKE" FIGHTER WS 1680mm S 41 dm² Weight 2,6- 3 kg .40- .50 2 cycles RC 4 - 6 servos


Mr. Masahiro Kato was a top FAI pattern pilot who won many Japanese National championships.

As many high level modelers, he was designing and building his machines himself. After establishing his own company, named M. Kato Model Aircraft Manufacturing Co. Ltd, he began selling his MK kits.
Parts were all first quality balsa, pre-cut and many already pre-formed. A very high level of quality was achieved, Mr. Kato being without any doubt a very perfectionnist man, how could he climb to the first place in his country otherwise?

His main products line consisted of high level aerobatic models but he also designed some scale warbird. These were soon handed over to Marutaka, so he could concentrate himself on Pattern flight, altough he continued to design and draw many scale models for Marutaka. His first scale model MK kits were diffused in very small numbers and they did certainly not bring him much money, considering the high level of craftmanship involved. I will try to establish a list of the now very scarse scale models kits and also give an outlook of his long list of stunt champions, designed by M. Kato or by some of his fellow competitors.

MK very first scale warbirds designed by M. Kato:

ZERO

KAWASAKI HI-61 "HIEN" WS 70 "

JUNKERS 87 D-5 WS 1875 mm 4 kg .60


Baldeagle 01-09-2010 08:37 PM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
A lot of good info. Thanks I love the royal kits. Rich

olenorski 01-11-2010 03:03 PM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
Besides the Cessna 310 -Q, didn't Royal/Murataka also make an earlier version? 310-G or something like that?

DaveG[8D]

paulinfrance 01-12-2010 09:27 AM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
1 Attachment(s)
Hi this is my first post to this forum, now living in Europe i am re-fitting out my old planes, i have the Marutaka Spitfire built 16 years ago
and still flying with an Enya 90 4 stroke, retracts,
and now i am Re-fitting out my Stuka JU87 D5 which i built in about 1989 with a Rossi engine, with a Super Tigre exhaust, re-fitting
is complete but this time an OS 61, can anyone out there give me the C of G please ?.

CaptainBlueSky 01-12-2010 11:15 AM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
Welcome on board, paulinfrance, and thank you for this nice picture.

I don't have the JU87 Marutaka plan ( I whish I had to compare with mine to look for modifications introduced by M. Kato for Marutaka kits) but I have the MK Junkers J87 D-5 which is very similar in size and design. average scale is 1:7.3 , yours is 1:7.65.

My plan is showing a CG at 10 cm from leading edge, on the fuselage plan, with a wing cord measuring 41.5 cm at this location. CG is easy to check: it is exactly corresponding with cockpit side of fuse former F5 ( instruments panel).

It looks very conservative also, being pretty much on the forward side.

Happy landings!

paulinfrance 01-12-2010 11:27 AM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
That was quick, thanks, my corde is 39 cm.

paulinfrance 01-17-2010 12:41 PM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
I found a plan on E bay, but no answer from the seller.


http://cgi.ebay.fr/ws/eBayISAPI.dll?...m=250558586640

paulinfrance 01-19-2010 02:50 PM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
Seeing as the the seller on ebay can't be bothered to even reply to my two mails,
i will have to take him off of my shopping list, anyway i worked out 30% being 8cm,
and PERFECT, as i flew it today, a bit faster than i remembered, than when it was
fitted with the Rossi and it alsohas a bit more response with the OS 60 i also took
out 50 gms of leadfrom the nose.

CaptainBlueSky 01-19-2010 02:51 PM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 

Quote:

ORIGINAL: paulinfrance

I found a plan on E bay, but no answer from the seller.


http://cgi.ebay.fr/ws/eBayISAPI.dll?...m=250558586640
I could have my own MK Kato plans professionally copied at 600 dpi using toner dry ink, not cheap inkjet copier, and sent to you if it can help.
Cost would be 16 euros + shipping ( mailing from France is even possible ) .
MK scale size is a little bit larger than Royal but it can be reduced to fit same fuselage length if you want (better to use same fuse length than wingspan if you want to check for your CG with high accuracy)
Just drop a PM if you are interested.


paulinfrance 01-20-2010 01:40 AM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
No it' OK thanks, as you can see my problem is solved.

Lewis S. 03-14-2010 03:05 PM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
Hello,
I have an MK Products Cessna 182 kit from the early 1970's that does not have plans, does anyone know where I may be able to get a copy. This is a fairly large size, I would assume for 60 size engines.

Thank you
Lewis

CaptainBlueSky 03-14-2010 03:48 PM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
Hello Lewis,

unfortunatly, I don't have a plan for your MK Cessna 182.
I have the Marutaka Cessna 172 but I don't think it would help.
May be someone else could help you, don't hesitate to give the informations printed on your box and good luck.

Al

Michaelj2k 03-15-2010 11:25 AM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
1 Attachment(s)
Quote:

ORIGINAL: CaptainBlueSky

There is also a JU 87 B2 version, scale 1/8.3 WS 65 3/8 Surface : 697Sq./in. or 45 dm² 3.2 - 3.7 kg 78 lbs .60 engine


Any plans floating around for this one? I have a wing but lost the fuselage through stupidity.[:@]

Note the aileron hinge line vs. the D model.

CaptainBlueSky 04-04-2010 10:34 AM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
For all those interested in the classic pattern ships: [link=http://www.rcuniverse.com/forum/m_9636215/tm.htm] MK KITS LISTING [/link]



I-fly-any-and-all 04-11-2010 09:54 PM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
I got the plans send me your email if you need them still.

I-fly-any-and-all 04-11-2010 09:56 PM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
do you still need the plans for the mk cessna? I have them and would need your email...

scale only 4 me 04-16-2010 10:23 PM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
Not sure if this helps you bcause I made a Super Stearman out of the kit, but I hve a nice pic of my MTK-068 BOEING pt-17 STEARMAN Biplane 1:5.65 3,9 -4,2 kg .61 - .90 RC 4 servos in my gallery,, feel free to use if if you like http://i7.photobucket.com/albums/y25...lanes/f788.jpg

good luck

CaptainBlueSky 04-19-2010 04:08 PM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
Thank you scale only 4 me,


Missing pictures will now be included here, the edit option is not available anymore for the first part of the list.

MTK-006 JUNKERS 87 B2 Stuka, scale 1/8.3 WS 65 3/8 Surface : 697Sq./in. or 45 dm² 3.2 - 3.7 kg 78 lbs .60 engine
Note aileron hinge difference. Picture and model from Michaelj2k, thanks
http://nsm03.casimages.com/img/2010/...6346041810.jpg



MTK-012 DOUGLAS C47 - DC3 1:13,7 WS 2112mm 49,5 dm² 3,8 - 5kg .35 - .40 x2 4 - 6 ch.

http://nsm03.casimages.com/img/2010/...6345828391.jpg
Built by Mr. Jan Karlsson and powered by two OS FS .26 (4 cycles)


MTK-068 BOEING pt-17 STEARMAN Biplane 1:5.65 3,9 -4,2 kg .61 - .90 RC 4 servos

http://nsm03.casimages.com/img/2010/...6345867577.jpg
Kit built and modified as Super Stearman by scale only 4 me

FNQFLYER 04-24-2010 06:49 PM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
esting to find this forum. I purchased my Marutaka kits in Hong Kong in the early '90's when I was station engineer for MAS. I have still NIB a Reliant, a Staggerwing and a Stuka. I have make (and currently unlocatable) f/g;assmold for the Reliant cowl.
What I am looking for is molds for the Stuka bits(pants, cowl etc) and theStaggerwing cowl etc. Also I am looking for the build instructtions put inthe Royal kitsfor these models if they are available
I am also looking for advice as to what sort of retracts I can use in the Staggerwing
If any one has any information regarding any of the above I would be very grateful as would my flying companions who also havethese kits

I-fly-any-and-all 04-28-2010 01:46 PM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
I've got scans of the plans for all the kits they had.
whats your email address so I can send them?
Also there is a guy on Ebay who has fiberglass parts and plastic canopies for all their kits for sale.

RC-CAKES 04-29-2010 10:09 AM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
1 Attachment(s)
Those of you that have the JU-87 Stuka - Can you post pics of how/where you mounted servos in the wing and fuse.. along with battery/engine mounting? I recently bought on that is mostly complete and just needs to be rigged and setup. I have the plans but it really doesn't show this info. Just by holding it and seeing the CG on paper, it looks like it is tailheavy without the engine. I have a ST G90 and am strongly considering a saito 100 4 stroke. Any input is appreciated!

Forum link:

http://www.rcuniverse.com/forum/m_93...tm.htm#9729969


I-fly-any-and-all 04-29-2010 10:47 AM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
Marutaka/royal never did show you where to place the servo's but I will tell you do not place them past the trailing edge of the wing! They get tail heavy easy, also check the weight of the stuka if its over 12 pounds its better to hang it. I've got a 14 pound .60 sized corsair by royal and shes going to hang, maybe the ama museum will take her lol.

Barcandson 06-28-2010 06:58 PM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
I have original catalogs from Marutaka that go up through their kit number 68, the Stearman. A lot of it it is Japanese, but it still provides their 'official' listing of their kits. If anyone shows interest, I could scan them and post them here. I have a reasonable set of the kits in varying conditions.

I would like a scan of the markings/decals of the Hellcat if anyone has them. Thanks.

I-fly-any-and-all 06-28-2010 07:08 PM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
YES YES YES PLEASE DO SCAN AND POST!

CaptainBlueSky 07-22-2010 02:20 AM

RE: ROYAL - MARUTAKA and MK KITS COMPLETE LISTING
 
Hi Barcandson,

I have catalogs M.R.M 0405 and M.R.M 588, so if you have anything else that could help filling the gaps, please scan.
If you don't want to post, you may just send by email and I will try to complete the list with your informations.
I will send you a pm if I can get a scan of the Hellcat's decals.

Happy Landings,
Al

Quote:

ORIGINAL: Barcandson

I have original catalogs from Marutaka that go up through their kit number 68, the Stearman. A lot of it it is Japanese, but it still provides their 'official' listing of their kits. If anyone shows interest, I could scan them and post them here. I have a reasonable set of the kits in varying conditions.

I would like a scan of the markings/decals of the Hellcat if anyone has them. Thanks.


All times are GMT -8. The time now is 12:51 AM.