RE: TA 152H Meister Scale Project Grun 4
1 Attachment(s)
Made some 1/32" plywood side panels under the windscreen, trimmed the can-o-pee, started the beginnings of the "Flathead Frankenstein" gun hood.
I gotta admit... It's starting to look pretty wicked. |
RE: TA 152H Meister Scale Project Grun 4
1 Attachment(s)
One Freak'n, Freaky, Frankenstein gun hood finished. Got the right side fuel fill panel box installed as well.
|
RE: TA 152H Meister Scale Project Grun 4
Wow DD.....that turned out very nice. Sweet!!
|
RE: TA 152H Meister Scale Project Grun 4
Thanx Bro! Gotta get back on the cockpit, make the sun visor for the instrument panel and finish up a few more fitting details in there.
|
RE: TA 152H Meister Scale Project Grun 4
1 Attachment(s)
The beginnings of the anti glare screen over the instrument panel. Several tries and now somehow it all fits. Wheew!!
|
RE: TA 152H Meister Scale Project Grun 4
1 Attachment(s)
Drilled out the gun sight bracket for a toothpick support. Added ledgers for gluing the upper instrument panel. finished up the anti glare visor with a little extra support.
|
RE: TA 152H Meister Scale Project Grun 4
1 Attachment(s)
Slit some old phone cord for combing, fitted the Gun sight, hand hold holes, more trimming... Anti glare sun visor finished.
|
RE: TA 152H Meister Scale Project Grun 4
Man this thing is turning out so nice. I better cool it with the details or Pandi is going to kill us at the scale meets.
|
RE: TA 152H Meister Scale Project Grun 4
That's the plan.
|
RE: TA 152H Meister Scale Project Grun 4
ORIGINAL: David010567 Man this thing is turning out so nice. I better cool it with the details or Pandi is going to kill us at the scale meets. |
RE: TA 152H Meister Scale Project Grun 4
1 Attachment(s)
BUM BUM rule is more my speed :)
|
RE: TA 152H Meister Scale Project Grun 4
1 Attachment(s)
So... I got all the gear door parts made now and I'm starting to trim everything up. Pretty happy with how nice and flat they lay down. I'm thinking I should get the gear leg doors mounted before final trimming of the inner belly door.
Man I'm itchy!!! |
RE: TA 152H Meister Scale Project Grun 4
1 Attachment(s)
Here is the fiddly little bracket I had to make to support the bottom of the lower gear door. Grrrr!
|
RE: TA 152H Meister Scale Project Grun 4
1 Attachment(s)
Bear with me as I work this all out... I counter-sunk the screws that hold the brass bracket so the doors lay flush. I had to grind off a little of the strut as well.
|
RE: TA 152H Meister Scale Project Grun 4
1 Attachment(s)
Started locating and drilling the lower gear door mounting holes. I cut a plywood inner liner from the supplied kit doors. I'm thinking I should glass the door liner to seal everything up nice.
This is gonna look great! |
RE: TA 152H Meister Scale Project Grun 4
1 Attachment(s)
Gear doors are final trimmed, drilled and the inner plywood liner installed using polyurethane glue. It's really amazing how the 1/32" plywood stiffens up the gear doors. I glassed the plywood just to seal the wood for finishing.
|
RE: TA 152H Meister Scale Project Grun 4
Keep the template for these. I've been known to nick a few of these.
|
RE: TA 152H Meister Scale Project Grun 4
The lower big door will be functional when I'm finished and slide up when the oleo is compressed. You won't nick these unless you loose a tire or nose over.
|
RE: TA 152H Meister Scale Project Grun 4
Here is the design I'm trying to achieve from the David Anderson plans.
http://images.rcuniverse.com/forum/u...95/Om31984.jpg |
RE: TA 152H Meister Scale Project Grun 4
I still have to machine the slot in the lower door and make some small threaded stand-off's for the strut brackets. More on that later tonight.
|
RE: TA 152H Meister Scale Project Grun 4
Nice touch. Sounds expensive ;-)
|
RE: TA 152H Meister Scale Project Grun 4
1 Attachment(s)
Here's my idea to attach the gear doors.... I sheened this little 1/4" diameter coupler and threaded it with a 4-40 tap. I can now use a 4-40 screw to attach the door.
Relax Pandi.... They are not silver hollow points. LOL!! |
RE: TA 152H Meister Scale Project Grun 4
1 Attachment(s)
Update... Here are the gear doors mounted for the first time. I turned all the little stand-offs down to .200 diameter to match the gear door clamps. I also left them all a bit too long for adjustment at final assembly.
You might ask... Why all the trouble, just use a brass tube as a sleeve? Well... With a brass tube over the screws you would have crank down on the screws to tighten the strut door clamps thus crushing the gear doors. Capiche? Pretty proud of my new sheening efforts. |
RE: TA 152H Meister Scale Project Grun 4
Maybe we can use a piece of fuel tubing between the standoff and the gear door for a shock mount? hmmm?
|
RE: TA 152H Meister Scale Project Grun 4
We should get some 4-40 countersunk screws and counter sink the gear doors so the screws sit flush.
|
All times are GMT -8. The time now is 05:35 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.