Questions/Upgrade
08-23-2011, 05:34 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2011
Location: Buffalo,
WY
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Questions/Upgrade
Hello everyone,
I'm kinda new to the RC boating world and have recently bought a boat and like the setup but may have burned out one of my motors already.
The Boat:
NQD PX-16 32"
Motors: electric 390's X2
1 ESC
7.2 volt, 4 batteries, 2x 3300mah Radio Shack and 2x 17-1800 mah Sent with boat.
Got the Boat Thursday 8/18/2011 Possible burned outStarboard motor on Saturday8/20/2011. I'm Thinking of Upgradeing motors to brushles and need oppions on motors.
I'm kinda new to the RC boating world and have recently bought a boat and like the setup but may have burned out one of my motors already.
The Boat:
NQD PX-16 32"
Motors: electric 390's X2
1 ESC
7.2 volt, 4 batteries, 2x 3300mah Radio Shack and 2x 17-1800 mah Sent with boat.
Got the Boat Thursday 8/18/2011 Possible burned outStarboard motor on Saturday8/20/2011. I'm Thinking of Upgradeing motors to brushles and need oppions on motors.
09-09-2011, 09:31 AM
#3
Join Date: Jan 2007
Location: Frisco Texas NY
Posts: 2,446
Likes: 0
Received 0 Likes
on
0 Posts
RE: Questions/Upgrade
Hi Viper,
Belowis a forum in the electric speed section dedicated to all of the things that you can doto an NQD boat. This is a pretty active thread and i'm sure you will get some great suggestions from likeminded people that have similar boats.
I hope you find this link helpful:
http://www.rcuniverse.com/forum/m_79..._1/key_/tm.htm
-Rich.
Belowis a forum in the electric speed section dedicated to all of the things that you can doto an NQD boat. This is a pretty active thread and i'm sure you will get some great suggestions from likeminded people that have similar boats.
I hope you find this link helpful:
http://www.rcuniverse.com/forum/m_79..._1/key_/tm.htm
-Rich.
09-18-2011, 08:49 PM
#4
Junior Member
Thread Starter
Join Date: Aug 2011
Location: Buffalo,
WY
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: Questions/Upgrade
Thanks for your opinions.
I ended up getting a newer boat Similar to what got fried. I'm running a little differently to keep the motors from frying. and it working out ok.
Here are pics of the two boats. The first pic is the fried boat, now used for parts. The second boat is the working well boat.
I do not need any more assistance or recommendations, I appreciate all your help.
Thanks again.
I ended up getting a newer boat Similar to what got fried. I'm running a little differently to keep the motors from frying. and it working out ok.
Here are pics of the two boats. The first pic is the fried boat, now used for parts. The second boat is the working well boat.
I do not need any more assistance or recommendations, I appreciate all your help.
Thanks again.
