JERSEY SKIFF STAND
10-03-2011, 12:02 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Queens , NY
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
JERSEY SKIFF STAND
I WAS WONDERING IF SOMEONE COULD POST A PIC OF THEIR STAND THEY KEEP THEIR JERSEY SKIFF ON.IM LOOKING TO MAKE ONE FOR MYSELF OUT OF PVC.THANKS CHRIS
10-04-2011, 09:19 AM
#2
Join Date: Jan 2007
Location: Frisco Texas NY
Posts: 2,446
Likes: 0
Received 0 Likes
on
0 Posts
RE: JERSEY SKIFF STAND
Hi Chris,
Below is a picture of a PVC stand that I am using while building my boat. This boat shares the basic hull style of a Jersey Skiff.
It was made from PVC pipes from Home Depot. There is also a two part glue for PVC that should be used. I also covered the PVC with foam pipe insulation as a padding.
I coveredthe foampaddingwith painters tape bacause I was painting.
-Rich.
Below is a picture of a PVC stand that I am using while building my boat. This boat shares the basic hull style of a Jersey Skiff.
It was made from PVC pipes from Home Depot. There is also a two part glue for PVC that should be used. I also covered the PVC with foam pipe insulation as a padding.
I coveredthe foampaddingwith painters tape bacause I was painting.
-Rich.
